ﾐ☆ Painting w/ Posca Pens on Wood Slices!

[@dewdropart4180]

Something about painting on wood is so satisfying ✨

[@tirameowsu]

it really is!! 💖

[@Maddie.d326]

DewDrop Art true!

[@WeblightDreams]

Omg the wood pieces are so adorably tiny and all three came out so pretty. :)

[@tirameowsu]

aaaa thank you thank you!!! 💕💕

[@stephenmh2008]

I'm still very impressed with how well these turned out! Resin is sketchy but you did such a good job!!! I love you so much!!! 💞💗🖤🧡💓💘💞❤️💜💓💚🖤🧡💓💓🧡💜💖🖤🧡💓💘💙♥️💙🧡💞💖🖤💝💙❤️💗💘🖤💖🧡💓❤️💙♥️🤎💘

[@tirameowsu]

thANK YOU I LOVE YOU!!!! 💕💖💖💕💖💕💖💕💗💕💖💕💖💕💖💗💕💓💕💗💕💖💕💖💕💗💕💖💗💕💖💕

[@katgeorge7041]

I love using Posca on wood! I typically sand it and gesso it first. Very satisfying!

[@oliviamarie26]

This was really fun!

[@vanillapocky6886]

You draw so good! 🌸✨🤩

[@tirameowsu]

thank you!! 💖💖

[@Kokose]

honestly i wanna buy something like this it is so pleasing to look at omggg

[@F2p7YshCn9]

I personally sketch on gesso with a metalpoint (you can get a mechanical pencil lead sized silver, gold, or brass wire). It can't be erased, but since it gets covered with the paint it doesn't matter.

[@pixelpawdraws4445]

This is such a fun idea and they turned out great! The resin on top adds such a nice touch! Love it!!!

[@tirameowsu]

thank you!!! ☺️💕💖💕💖💕💖

[@allthecolorsinmyhead]

I’m surprised that your pencil didn’t work on the gesso, usually gesso adds a bit of tooth that helps pencil grip. Or at least it works for colored pencils. Maybe try a softer pencil, somewhere in the 3-4B range? Might go down easier. A pastel or charcoal pencil might work well too.

[@lynn5617]

I would love to see you make a piece and seeing you experiment more with resin!!

[@maddymoss6885]

I loooveee these so much, such a great idea to use the posca markers on the wood.

[@tirameowsu]

ahhh thank you so much!! 💖💖💖

[@sk8boy168]

Ok inbound alert new art style I love! Also I love Madoka magica but most of all sayaka

[@tirameowsu]

thank you so much!!! all of the pmmm girls are perfect 😭💖

[@sk8boy168]

tirameowsu I couldn’t agree more I just can’t wait to see if they do do a sequel movie cause new madoka magical girl outfit.

[@sienacantaim]

these turned out so cute!!!!

[@tirameowsu]

thank you!! 💖💖💖

[@acrimoniousblood6288]

These wood slices are hella cute, and I havent seen any OG Naruto fanart in so long. I may have to see if I can pick up some wood slices and try out something like this myself!

[@tirameowsu]

ahhh I hope you give this a shot, it was so much fun!!

[@acrimoniousblood6288]

@@tirameowsu I did give it a go, with some good old InuYasha fanart. It was fun but very difficult. The wood panels I got were so textured

[@shionyitzumura]

You should try clear gesso,can do your sketches then do clear gesso on top. I find using clear gesso or even a clear gloss medium makes the postcard cloys be more vibrant.

[@ArtWorkOfDR]

They turned out cute

[@tirameowsu]

thank you!! 💖💖💖

[@bakotademon5543]

Really amazing and beautiful, I’m so excited to try this too...💜

[@tirameowsu]

thank you!! 💕💖💕💖

[@rachelthompson7487]

I love the style you drew them in. beautiful drawings!

[@tirameowsu]

thank you thank you!! 💕💖💕💖💖💕💖💕

[@rachelthompson7487]

@@tirameowsu your welcome ♥️

[@CYB3RP1X3L]

I love themmm!! 💖💕💖💖

[@tirameowsu]

thank you!! 💖💖

[@CYB3RP1X3L]

@@tirameowsu no problem

[@Mekeweissame]

It’s sooooooo shinyyyyyyy •o• I loveee the resin; I hope you do more in the future!

[@tirameowsu]

thank you!! 💖💖 resin has such a beautiful finish 💕

[@katlynthompson1356]

If you want to stop the bleeding use a clear gesso, clear gesso feels a little gritty so you can easily sketch ontop. These are beautiful 😍

[@tirameowsu]

I had no idea clear gesso even existed before making this video 😂 thank you so much! 💖💖

[@katlynthompson1356]

@@tirameowsu it's how we learn! You can also take a light sand paper and sand the surface of the dry clear gesso and get a very smooth surface for uses of acrylic paint, posca pens and such. Then you can scale out the size of your sketch on a piece of paper. put your sketching into Place go over it heavily with charcoal and press it onto said work surface to transfer the sketch. So many different ways to do it!

[@niqchus]

I love how your videos have 4th gen pokemon music (the ones i have watched, because i just found your channel)

[@jeanettebg412]

If it's difficult to sketch on I would suggest sanding or maybe doing thinner layers by mixing a little water and sanding in between those layers. Also clear gesso would have worked well so you could sketch first and then seal with gesso. Matte medium works the same as gesso but it's clear and less textured.

[@tirameowsu]

I didn't even know clear gesso existed 😅 thank you for the tips!!

[@jeanettebg412]

@@tirameowsu you're welcome! Yeah I didn't either until like a year or two ago and it's a real life save for stuff like that. So you can sketch first and seal later

[@Maddie.d326]

Oh no I’m a bit late ahh! Always wanted to get some wood slices and paint on them, I also wanted to get some posca pens. Better look on amazon! 😉 Great video as always. I enjoyed it a lot, super satisfying and they turned out BEAUTIFULLY!!!

[@tirameowsu]

ooh I hope you try out painting on wood slices!! I had so much fun doing these few,, I'm looking forward to more! 💕💖💕💖 and thank you so much!! 💖💖💖💖💖

[@Maddie.d326]

tirameowsu I totally will try this! I’ll even tag you in my Instagram post so you can see! 😊🌟

[@tirameowsu]

@@Maddie.d326 yesss thank you!! I look forward to seeing it!! 💖

[@Maddie.d326]

tirameowsu ofc!

[@gay6272]

If you ever ended up opening an online store then you could sell these as little coasters, you could maybe manufacture them out of a different material :)

[@tirameowsu]

I thought about making some of these to sell!! I need to get a lot better with resin first haha

[@MsMidgetWarrior]

In the future you could sketch on the wood and either thin your gesso to be more transparent or use clear gesso so you can still see it. I’ve also found that regular graphite goes over gesso just fine.

[@realquirky]

Posca Pens are originally from Japan, and in Japan they are very cheap. If you want them cheap, the best option is buying them from a seller that brings them straight from Japan or courier services like Rakuten or Zenmarket. I'm not from the USA, so I don't know how expensive they can be in comparison, but, I swear, Japanese Amazon has so many cheaper alternatives. With Poscas, Copics, Holbein Watercolors, Tablets, my god, so much cheaper. The gesso works great for coating sketchbook paper that would be destroyed by the Poscas xD If you ever want to try painting on top of canvas with the poscas, that's a great option as well. I've seen other people sketching first and then adding a layer of a more transparent gesso on top, although, I've never seen that kind of gesso before, so I can say nothing about it. As a resin crafter, I suggest you go easy with the glitter if you are going to pour over a surface, because, depending on the glitter and other factors... GLITTERCANSINKANDRUINEVERYTHING. So just be carefull, experiment a little with silicone molds. I use to mix a small batch into a silicone mold, then paint on top of the cured resin and then add other layers on top as test pieces and it's really fun to do. Also...be careful with the lighter, you can accidentally burn the resin, and it would look soooo baaaad. I recommend this tutorial, if you want to learn more: kzbin.info/www/bejne/n6C8l5p3qL2Gpdk

[@tirameowsu]

I've never thought about using gesso in a sketchbook to prevent the paper from pilling!! that's a really good idea ☺️ and thank you for the other tips as well!! 💖

[@realquirky]

@@tirameowsu I have seen people even doing it with oil paints in sketchbooks, that's awesome 😂😂 you're welcome. I can't wait so see you try this one more time with larger pieces. Be careful with resin, you could get addicted to it 😂 is so much fun once you get the hang of it.

[@Lusithane]

If you don't want the colour to bleed on wood you have to pass a cutter through the lines, this will cut the flow of the wood grain and it will help keep your colours separated

[@TsukabuNosoratori2]

You should try sandpapering the gesso after you put it down and it dries. I find an 80 grit fine sandpaper makes it a lot easier to draw on gessoed surfaces. I do love how these turned out! I don't have posca pens, but I do paint in acrylics so sandpapering makes the gesso less abrasive.

[@tirameowsu]

ooh I never considered sanding the surface of the gesso!! I'll have to try that next time, thank you!! 💖

[@joan_of_snark]

you could do UV resin! that way you could cure it super fast and not have to worry about cats and whatnot getting into it. and when it comes to mixing things equally, a scale (like a food scale) is super helpful. :) make sure you 'zero out' with the weight of the cup/container you are measuring with.

[@tirameowsu]

I've tried UV resin before but the one I got never fully cured, it just stayed sticky. do you have a good brand recommendation for UV resin?

[@joan_of_snark]

@@tirameowsu hm, I don't personally, but I'm assuming it didn't cure completely because you either didn't mix it well enough, the measurements were slightly off, or the layer was too thick (maybe it would work via several thinner layers and curing as you go?). Was the one you used a one-part resin or a two-part resin? could also have been humidity (though I've read mixed things about whether or not humidity can affect it) or perhaps the UV wasn't strong enough or used long enough. Someone also suggested wiping off the outer layer w/some alcohol to get rid of tackiness. Unfortunately when it comes to things like resins, epoxy, silicone, etc. is that they are all a tad finicky, and sometimes you can do everything right and things still don't always come out perfectly

[@baldeagles18]

How heavy is the white compared to sharpie I’m looking for a thick white to do logos etc on wood

[@artfulsaaga]

That is actually very neat and awesome to know how do those act like on wood! 🙊🧡 They sure turned out great! I love posca pens myself and it would be so awesome try that out too! x3

[@tirameowsu]

thank you!! I highly recommend this -- it was a ton of fun!!! 💖💖💖

[@lemonaids7778]

I never clicked so fast

[@tirameowsu]

thank you!!! 😭💖💕💖💖

[@asketchylady7220]

I love posca pens! I bought my big packs on amazon then added more with coupons at joanns to make them 50-60% off each. ;) Thanks for the resin tips. I have a Pocahontas painting on a wood slice I am working on and that will look amazing with resin on top.

[@tirameowsu]

coupons are a godsend 😭 and good luck with tour Pocahontas piece!! 💖💖

[@maltafirechild6273]

I didn't know that you can use the coupons from Jo-ann's for Amazon... I'm always getting Jo-Ann coupons as well as Michaels

[@Mackerachi]

They all turned out really well! :D You don't need to seal Posca on most surfaces, but the resin turned out good.

[@tirameowsu]

thank you!!! I only decided to seal them because I wanted them to have a shiny finish, so resin worked perfectly!!

[@Mackerachi]

tirameowsu Aldo the bulk packs of Posca’s are usually a decent price, so you probably got the real ones. Just gets expensive when you want to buy the other colours as singles outside the pack. Look forward to seeing more!

[@meymeycita]

💖💖💖💖💖

[@shiniXIII]

Ahhh they all turned out so cute!! It's a bummer that the gesso makes it nearly impossible to do pencil sketching but maybe you can try simpler designs that don't necessarily need much planning/sketching? It's nice that posca markers are so opaque that even if you did mess up you could always go over it to fix it ;w; Also the resin effect looks AMAZING--I know next to nothing about resin so it was super cool to watch the process of applying it!

[@tirameowsu]

thank you!!! someone also suggested sanding the gesso to make it easier to draw on, so I'll have to give that a shot!! worst case scenario, like you said, poscas are very opaque so I can always cover messes up (thank god). reSIN IS SO COOL!! I'm happy to have found some other use for it! it's such a gorgeous finish 💕

[@shiniXIII]

@@tirameowsu oooh hopefully the sanding works out then! And yeah the resin effect looks sooo nice--the wood pieces would make for really nice ornaments!

[@katziki_7108]

this is so beautiful 💛

[@tirameowsu]

thank you so much!! 💕💖💕💖💗💕💖💕💖💕

[@lunasmith1096]

Omg I love how u draw anime characters

[@rachelthompson7487]

Me too!

[@tirameowsu]

thank you!! 💕💕💕

[@lolo_idk]

Omg I just came to the video after watching some Naruto Shippuden, what a coincidence. I really like your art style. Keep it up!

[@tirameowsu]

thank you so much!! 💕💕💕💕

[@ArtsyMoss]

Hey! What pack did you get because I wanna expand my posca collection. I’ve tried looking on amazon, Michael, etc but can’t find the pink colors anywhere. Any tips?

[@tirameowsu]

I recommend checking out Blick for open stock colors!! they have every color/size 😊

[@fuzzydragons]

Good job with the pens 😃 the difference in how the 2 different pieces of wood reacted to the pens could be due to type of wood or that one is just a cut limb and the other probably compressed and glued together 😛

[@tirameowsu]

thank you!! and oooh that's very good to know, thank you! 💕

[@GalaxiaCreates]

You can buy uv resin which is already mixed and it can be cured using a UV lamp or put it in the sunlight but it cures faster in a uv lamp

[@tirameowsu]

I've tried UV resin before but the kind I for never fully cured,, it just got tacky 😖 so that experience steered me away from UV resin

[@GalaxiaCreates]

@@tirameowsu I know that different brands of uv resin react differently, some are sticky when cured and others don't. Some of the brands also don't react very well to pigments and glitter

[@tirameowsu]

do you have any brand recommendations?

[@GalaxiaCreates]

@@tirameowsu Let's Resin, Qaio Qaio DIY, Kiohara and TYDL. I forgot to mention in my previous reply that if the resin is still sticky you can put it in the UV lamp for longer, also pigments can also interfere with the curing of the uv resin.

[@Cherryblossum101]

I can get wood pieces at the art store a lot cheaper than the craft store where I live. Might be worth checking out!

[@partycreature9937]

And then there's me who wants to paint the back of a canvas for some reason

[@Cherryblossum101]

Try a different pencil or mb try lightly sanding the top!

[@doodleyournoodles675]

I can chose witch one is my favorite. I love all of them so much! OwO I want to do this now.

[@tirameowsu]

thank you so much!! if you do end up doing this, please tag me on social media if you post it! I'd love to see!!! 😭💖💖

[@e-dubbses403]

Have you ever tried varnish ?

[@tirameowsu]

I've tried other sealants in the past, but resin is by far the prettiest finish

[@e-dubbses403]

I really like your channel. I’ve always been scared to try that stuff. Seems too toxic. 🤷‍♀️ Can’t wait to see what else you put out. 👏👏👏

[@ceceezz]

Why so many views and so few likes! Really people.