Titan Drawers | Full review of 4wd Supacentre's drawer system

[@joshstrong4756]

Mate you're a really great presenter. Good job dude👍

[@pulsedesignbranding]

That was a great review, simple right to the point, not a lot of useless banter. Just wish i could get those in the states.

[@timdunn2387]

I'm happy to swap my Engel 42 for Bianca if you like. Well presented report mate.

[@Gee-Wizz]

I have two sets of these in commercial vehicles, one set would go in and out over 40 times a day 5 days a week and still going strong after nearly three years. Like the review said, a bit rough around the edges but tough as nails. For my purpose I bought a second set and would buy them again.

[@TimsBitsnPieces]

I have an 80 series with barn doors and I love my Titan draws.. they are a great item and didn't break the bank when I bought them back in 2019.

[@jaydenlyons6488]

Great video again mate! Ive been watching you since your first upload, the content is interesting and you get more and more natural as the uploads keep coming!

[@explorebound]

Thanks Jayden, really appreciate you watching from the beginning! 😃

[@MrFlop10]

Love the misso test hahaha nice work mate thanks

[@Ramjet7777]

That intro sound was the same as what Suspicious0bservers YT channel play's in his clips sometimes🤣

[@brownie8235]

I pulled my draws down and will now use one as a battery 12volt center for mounting to the front of my canopy.

[@stevegrant1702]

great presenter mate well done

[@southerngentleman5321]

great review thanks. Shame cant get just the fridge side one by itself.. cant seem to find that

[@RustysOutbackAdventures]

Another great video and thanks for the drawer review. I'm still tossing up about whether to install a set of drawers or custom build some sort of storage system.

[@CamperKev]

Thanks for the review. I installed a brand new set of Titan Draws for a friend. It turned into a nightmare job that took all day. I had to pull them apart and repair them before they could be installed. Inside I found sharp poorly cut steel hanging and flapping around, because it was never built correctly. I found rivets that were never seated and rivets missing. It was as rough as you could imagine. The poorest Chinese made rubbish that I have yet found in the 4WD industry. Apart from that, they were way too heavy and too shallow to be useful. Regarding my own vehicle, I paid more and bought Australian made Drifta Draws. Without going into all the details, they are so much better in every way and worth every cent. The most useful modification I have made to my Hilux.

[@explorebound]

Thanks mate, I've heard good things about Drifta!! They are quite a lot more expensive, but certainly sound like a good investment for those who can afford them - and great to support locally made gear. Here's a link to the Drifta range for anyone else reading this that might be interested: www.drifta.com.au/4wd-drawers/

[@myintkyaw6843]

Bla bla, why do you own a Hilux? They are made in Thailand! Ohh look because you bought a Hilux, Holden is now out of business. 🙄

[@CamperKev]

@@myintkyaw6843I've had a number of Holdens in the past, but Holden did not make 4WD's.

[@myintkyaw6843]

@@CamperKev LOL, Holden Colorado?

[@CamperKev]

@@myintkyaw6843 Holden Colorado's were built overseas in Thailand and were a rebadged Isuzu. Holden did not make 4WD's but they should have. They should have given the people what they really wanted. That is why Hilux and Ranger are the greatest selling cars in Australia. That's what people want but Holden failed to build them.

[@MrJohnsmiley]

I have the XTM drawer which I got as present over 12 months ago. The key snapped in the barrel recently and NO locksmith can get the barrel. Both BCF and Supercheap are both lacking in any support to even ask the distributor for any spares. So if your considering getting this product then consider an alternative brand as XTM has NO support for product failures.

[@wkdisgood]

Another great upload, Keep up the great work.

[@oliveerd]

Every one who reviews them says there heavy what are some other models weighing in at.

[@kestikiadventures8929]

How would they go on a Ute tray in terms of water getting in?

[@hasaneski3878]

Mate what's the maximum weight does the top panels on top of the slide draws handle cause my son is a tradesmen and his tool's are very heavy around 300kilos and what's the height messaments of the front thanks

[@antem77]

Love the drawers, but next car, I won’t get them again, only because of weight, other than that, good product

[@fullysickmeboy09]

Gday mate great review got a question I've just bought a set of the draws I've got a 90ltr fridge will it mount on top of the slide and hold it's weight empty and full by chance cheers

[@explorebound]

Hey mate, hard to answer definitevely as 4wd Supacentre doesn't provide weight ratings for the fridge slide, but in the video we tested it with 50-60kg without issue. If you've got the Kings 90L fridge, they weigh 33kg empty, so long as your food is under 20-25kg then should be fine (it could perhaps take more weight, that's just what we tested it to). As for dimensions, there's quite a few drawer models to choose from so I'd recomend checking the dimensions of the model you're after. Cheers.

[@fullysickmeboy09]

@@explorebound Ok easy I bought a 100ltr titan fridge slide I'm gonna mount it on top of the 2 draws and use that I reakon it'll hold the weight then finger crossed lol cheers for the fast reply

[@skitzy8189]

I did have one of those xtm drawer and I was not happy with it. After awhile I ripped it out and now it’s some were in tip..

[@swagging_sisters]

Thanks for the review. Can see the appeal with these but reckon we'll stick with the second-hand Drifta drawers we have, find them much lighter and more room.

[@explorebound]

Nice work scoring a second hand set - that's the way to go! Given the choice I'd say hands down Drifta would be better purely from a functionality perspective, however factoring in the brand-new cost can make the decision a bit tougher when buying off the shelf. Cheers!

[@riltf]

Can you pop a mattress on top? Would it hold 160 kg?

[@explorebound]

Yep we’ve done that in the past and it worked ok (aside from being really close to the roof!) I couldn’t say regarding weight capacity but at a guess I’d say it would be ok

[@riltf]

@@explorebound thank you. you are the best

[@79series]

Is that 70kg per drawer or both.

[@explorebound]

That's the weight of the whole unit

[@derekrowanphotographics]

Works well but Seriously the nut rivets in Titian Draws are 💩! (During installation a burr develops at bottom of nut rivet thread) If you buy a set, strongly recommend to thread a M6 tap through all Nut rivets.

[@makatogonzo]

The underside of the top shelf has its framing exposed such that the drawer items can get caught with the cross member. I have to get a long ruler to free the drawer or try the fridge slide if it's on that side. The underside should be smooth so that drawer items can't jam the drawer. Can't recommend this drawer.

[@NickMango]

Not many drawbacks :)

[@jessiepink3624]

Don't buy anything from kings supa centre. They are a dirty running bussiness

[@szainaa9926]

the sound is not good I am quite disappointed