Titan X-3 21.5 inch folding rack review

Titan t-3 folding squat rack review. Great quality for the money. Roughly$400 for everything on titan fitness website. I recommend this rack on a budget. Link added on pinterest for update pin.it/16j2nz6

[@danwilson6783]

Seeing you struggle with the pins might be the best advertisement for a PRx rack that I've seen!

[@keithspringdiyguy4562]

Lol. By the 4th time pulling it back out, it slides easily. $450-500 total was worth it to me.

[@mrgray1990]

considering prx is damn near 3x more 🤔 yea I think I'm okay with taking another 1 min to set it up

[@wannabelikegzus]

Thanks for the demo and talking through the challenges of putting it up. It's amazing how systems take things like level floors for granted.

[@wjleier]

dude, 297 is unreal in these covid times. happy pressing

[@yardbird402]

Thanks so much for posting this. My wife got me the shorter version to fit under the garage door rails and waiting on it. I expected it to be a pain to install even before I saw your video but I'm glad to hear you are satisfied with it.

[@shaun4928]

I just bought what you bought since I'm keeping under the garage rails too - how did it go? I'd love to hear your suggestions.

[@yardbird402]

Well it never arrived and we found out it had been discontinued so we got the refund. Couldn't wait for the new model so I got the Rep Fitness PR-1100 instead which is not wall mounted. Luckily got it before all this pandemic stuff happened.

[@shaun4928]

@@yardbird402 Can you do pull-ups without it wobbling?

[@eddymataii5709]

@@shaun4928 Yes. It's very stable even though it is not one that bolts to the ground. It has a dip attachment and doing dips does make it shake a bit but I never feel like it's going to tip over or come apart. It's very well built.

[@keithspringdiyguy4562]

@@shaun4928 no wobble at all. Especially since the the permanent floor went down

[@dbraden682]

Bro your video has been a god send to install this rack! Thank you!!

[@conzerseiei3313]

Hello sir, I noticed you had some problems putting the pins in and you said it was a little warped. We do have a one year warranty on our products, so you could get whatever piece causing you trouble swapped out!

[@estebanhernandez500]

Thank you for the video.

[@lisawinne7590]

So we’re you not able to get one of the anchors into the wall stud? Concerned with that now.

[@keithspringdiyguy4562]

The 2x8’s are mounted to the studs and that is enough support. Most of the weight once the rack is setup, is distributed to the ground. Still working great.

[@richieaustin1604]

What size screws did you use to secure the 2x8 to the studs and the rack to the 2x8? Getting ready to pick up that hardware tomorrow for install. Thanks, well done on the install.

[@trashtalkincollector]

I was looking at buying this. Is it worth the purchase?

[@futbol1972]

So whats size of lag bolts and what size is the stringer?

[@deanberman7798]

Mine didn't come with the wall anchors or screws to put it into the wall. Did yours? If not, what size anchors did you end up buying?

[@amandab416]

I have the same issue, what did you end up using ?

[@keithspringdiyguy4562]

@@amandab416 I used 3'decking screws to mount the 2x8, and 2 1/2" lag bolts to secure the arms

[@rwc7482]

@@keithspringdiyguy4562 2 1/2"lag bolts but what size hex? 5/16, 3/8?

[@vortexmoose5240]

Did your come in 1 box cause my 3x3 post aren’t here

[@RogaBigCalves]

How much do you notice the extra rack width compared to traditional racks? I've seen complaints that it is too wide, but I have seen novice lifters have more sway when rackinga and unracking than I do and have never had so it'd be nice to hear from someone who has been using it.

[@keithspringdiyguy4562]

It's not a problem. I'm not benching anything more than 250lbs. This rack is working great.

[@The_Fit_ness_monster]

nickmomrik.files.wordpress.com/2018/11/2fpwr-manual-rev-2016-08-29.pdf. This is a link to the installation manual. It’s super easy took me about 45 min by myself. I had the stringers hung 2 weeks before the rack came in and using the measurements given it went together perfect. I had to add a 1/4” to the left side measurements bc my garage floor slopes a bit and it still lined up perfect. Hope this helps to anyone else.

[@yankeetraveler1118]

That is a great help! I bought a 41" Titan X3 used and all Titan would send me is a parts list as a "Owners Manuel". This is a big help, thank you!

[@BrownBarbellClub]

Yes this is simple. We created step by step video for same. Checkout kzbin.info/www/bejne/jIjSqmilqZmffMk

[@futbol1972]

Does anybody knows what size rogue rollers would work with my titan x-3 foldable rack?