TJ fog lights problems

[@ericj.niksch8422]

This was an excellent demonstration. I didn't want to have to replace the switch, and this repair worked perfectly. Thank you Sir!

[@JUSTTRYITDIY]

glad it all worked for you, thanks for watching 👀

[@randyholcombe4234]

Works good. I had previously filled in the divot with JB Weld but it wore down. Had to get a heat gun and tubing, but no big deal. Hoping this is a permanent repair this time.

[@ElCholango]

Great video, I got this done in an hour. Thank you sir!!

[@stevenlemons3276]

After watching the other video and yours I did it. Thanks for the confidence booster for I too have “wreck it Ralph hands”. 😬🤚🏻✋🏻

[@JUSTTRYITDIY]

glad I could help. “There’s no one I’d rather be, than me!” - Wreck-It Ralph

[@FrankRitchie-x5n]

This fix was great and surprisingly easy. well done! However, my headlights are not working now. Every other light works. any ideas or suggestions. The fuse is fine too. thx

[@JUSTTRYITDIY]

I am not sure 😕

[@felishiadarling]

My fog lights were the opposite. They’d come on but if I hit a bump they’d go off-on-off etc. I could get out and smack one and they’d go back on. Now they don’t work at all. My error says something like ‘open panel’. I did this fox your showing here…and nothing. The wiring seems intact. I need to do a thorough check first, but from what I can reasonably tell, it looks good. Do I need to replace the whole switch cluster, you think? Idk It’s also a good idea to take pics so you know how to put it back correctly.

[@JUSTTRYITDIY]

you may have an issue with the switch contact. If you have hit the lights themselves, it could be an issue with the light. double check the voltage at the light with a test light before you go through the work of replacing the switch.

[@jlathem56]

Can anyone tell me what size shrink tube to get? Would like to have everything at hand when I start this repair if I can. Thanks!

[@ramonaquino3408]

How about on my wrangler JK 2013? Almost same problem fog lights… wont turn on

[@JUSTTRYITDIY]

Might be I am not sure of the construction of the 2013s

[@seanwilliams2297]

Homeboy is entertaining

[@JUSTTRYITDIY]

thanks

[@1111Mercury]

I’m about to do this with my 06 TJ… and I’m terrified😳🙏🏻

[@JUSTTRYITDIY]

just take your time and give yourself space to work

[@prepperboss]

What is that entire unit called?

[@JUSTTRYITDIY]

the whole thing is called a turn signal switch

[@prepperboss]

@@JUSTTRYITDIY thanks. Everything on my ‘03 TJ works fine except the fog lights. Won’t go on when I pull the lever. 🤷‍♂️

[@prepperboss]

The switches I’ve seen online only have the left side lever. Not both. Any ideas?

[@JUSTTRYITDIY]

The only ones I find are ones on eBay. when I look for TJ wiper and signal switch. Sorry, I am not any more help

[@prepperboss]

@@JUSTTRYITDIY no, you have been helpful, thanks

[@montrose5paulina]

What if my fog light doesn’t turn off? I replaced the switch, turn switch and the only way it turns off is by removing the relay.

[@JUSTTRYITDIY]

I would guess there's still something wrong with that switch

[@montrose5paulina]

@@JUSTTRYITDIY The fog bottom or turn switch?

[@JUSTTRYITDIY]

@montrose5paulina fog