TM GBBR Airsoft MP7 Hop Up upgrade

[@Flatcap-hz9bj]

Thanks for the video. Never would have worked that out on my own. I found with the autobot 50 I put in I needed to trim a little off the long tab to get it to sit square with the crazyjet. Just got to wait and test it now

[@MakalaureKanafinwe]

I just fitted a 138mm Maple Leaf Crazy Jet Aero barrel with the brand new 2021 maple leaf 60shore autobot bucking, and I’m now shooting 290fps with 0.28g bb on the Abbey Predator 144a summer gas. Skirmishing at Team Green on Sunday with it to give a trial run. Expecting good things!

[@Zaakshadow]

How was it?

[@MakalaureKanafinwe]

@@Zaakshadow Pretty good, I have to say. I have swapped out to the 6.00 Prommy power barrel for the winter, to keep up fps, but the bucking works a dream. Easily kicking out 0.32s with excellent accuracy, range and consistency.

[@Mathematicus671]

I found it funny this was uploaded while i was working on an SMG, haha. I've always debated getting a compact GBB. Never got to it though. Hopefully soon. You've made it look fun.

[@EnglishKiwi]

I have???

[@Mathematicus671]

@@EnglishKiwi Teching, in itself, is fun for me. 😆 I've never had a larger GBB than a pistol. Would like something slightly larger.

[@jaycross320]

Love tuddenham will have to get a game in.

[@k0z-550]

Just a public service announcement. When you take the working parts tray out of the shell of the rif. The trigger bar has a little spring that holds it in. It can and will ping across your room. Be very careful it doesn't as it might waste 40 minutes of your life searching for it.

[@broadside8326]

👋🏾, wow,i'm amazed on how you "lube the tube" on the entry side.... i prefere to be squeeky clean so the bucking rather sticks to the barrel and use a small strip of teflon plumpers tape on the end of the bucking to give it that extra seal....but hey,if it works for you more power to you💪🏾 i just ordered myself a pdi 6.01inner mp7a1 145.5mm length. i'm runnin jdg war compensators on my emg ark17 glock's wich aloud me to extend the inner barrel length to 133mm. sorry for babbling😄... i came here to see if the barrel really looks to fit my ML hopup chamber unit and it really does,i just hope that the pdi barrels feeding mouth is not cut that deep like on yours... thanks for this vid🤝🏾

[@ArcticFrenzy]

I was looking at gbb smgs, good timing :)

[@huf_fitness26]

Sincerely, thank you so much for this video 🤝

[@JAGAIRSOFT]

Nice video mate, can we expect a TM MP7 maintenance guide video in the future?

[@EnglishKiwi]

Entirely depends on how quickly sausages breaks it :P

[@dominikdeluga5268]

Whats the range and grouping now with new hop rubber?

[@butdoesitexplodevids2886]

Damn that looked like an epic faff. Let’s hope they don’t ask you to drop a tight bore in as well down the line. Sod that disassembly more than once.

[@EnglishKiwi]

I honestly forgot how much of a faff it is! Good thing I didn't try and do it in my car during a build day at site!

[@butdoesitexplodevids2886]

@@EnglishKiwi I mean can that not become a series? kiwis quick car bodges?

[@EnglishKiwi]

That.... That is certainly an idea 🤣

[@butdoesitexplodevids2886]

@@EnglishKiwi not the best nor the worst one I’ve had. I’ll file it under more consideration needed

[@ethanbradshaw2500]

Very good guid, didn't know you could remove the hop chamber and barrel without splitting the chassis in half. I found it wasn't necessary to remove the adjustment wheel in order to split the chamber in half. Personally I really don't like touching those tiny screws as its so easy to round the heads so one less thing to accidentally damage

[@EnglishKiwi]

Good to know re the hop wheel. I just took it all apart as I didn't want to break anything 🤣

[@DiegoRodriguez-th1ho]

Is it okay to run it with straight propane?

[@QuantumThoughts69]

Nice one!

[@EVOAIRSOFTSNIPER]

hey, nice vid,.. do you think that there is something that we can do to make this weapon more silence?

[@46templar]

Ben why did you put a 60 degree hop rubber and what lengh barrel did you use as ive just brought the 15cm crazy jet but i have the 50 degree green rubber bucking

[@vladiivanov3799]

hi! can you tell me where you bought the MP7 from

[@jonathancharlesferriols1208]

Do you need to change the inner barrel when you change the hopup bucking?

[@craftydj121]

Was going to install an autobot in mine as really enjoyed installing one into my hi capa after seeing this I think I’d mess it up so will pass 😂, awesome video tho

[@Terminatorbart]

Successful surgery!

[@EnglishKiwi]

We can rebuild it! We have the technology!

[@airtacjames2532]

Hi mate, wanna take a dremel to the thing and try out one of our MP7A2 conversions? :D

[@airtacjames2532]

Also, failing that, I got some thumb savers here we'd love to send you :)

[@EnglishKiwi]

Unfortunately it's not mine to take a Dremel to, however I'll pass along the idea! The thumb savers sound interesting got a link to them?

[@milith]

aw man, i love airtac stuff! I bought a V2 MWS adapter then found out V3 was just released on the MWS discord...i don't think i can help myself. I wish I knew how to sand/paint better though, I don't like the look of the newly printed PLA without primer and a coat of paint to smooth things out.

[@lukester2070]

I really like your l85 a3 kit but I’d be paying more than the gun😂 would you recommend trying to make myself ?

[@EnglishKiwi]

Unfortunately that's the coats involved in small production runs in the UK :( by make it yourself would you go for a 3d printed route or try and get it made in metal?

[@lukester2070]

@@EnglishKiwi is probably go for metal ...

[@EnglishKiwi]

Honesty, unless you've got access to a lathe and a mill, it'll probably cost you a fair bit more to make it yourself. I was looking the other day, to get a single rail on its own, without painting would cost £700+! That doesn't even include the mount or the sight rail!

[@lukester2070]

@@EnglishKiwi thanks mate 🙏

[@rajazaku4021]

Hi, just wanted to ask can the decepticon one fits the tm mp7?

[@EnglishKiwi]

Should do bud!

[@rajazaku4021]

@@EnglishKiwi thanks for the answer but after i reconsider i think i'll stick to the autobot lol cause of consistency

[@00kingi]

Did you change the nub or keep the original?

[@EnglishKiwi]

I kept the original as I wasn't given anything else to install. That being said you could put a H key in.

[@NM-wd7kx]

Can't complain too much about the massive moderator, think of how quiet it must be

[@EnglishKiwi]

Perfect for when you've got a library stuffy session at 4 but an Airsoft game at 5!

[@NM-wd7kx]

@@EnglishKiwi why not blend both into the most exciting revision you'll ever do? I'll pack my MK23.

[@rotorblade9508]

If that grease touches the inside rubber it will eliminate the hop up function, then it will be difficult to clean the grease

[@smallislandairsoft5995]

Interesting that you kept the original barrel. Isn't the hop window too short for the maple leaf / larger contact patch buckings? I found that in my other TM I got great range but awful accuracy because the window was too short. For my mp7 I've opted for a maple leaf barrel for compatibility. If you can add anything to this or if I'm completely wrong let me know! Good video.

[@EnglishKiwi]

That could well be the case, though I thought that was more an aeg barrel issue that an gbbr barrel.

[@smallislandairsoft5995]

@@EnglishKiwi Ahh fair enough, TM aeg's aren't my forte. Side by side the TM window is wide and short, and the maple leaf is long(er) and narrow. But if it works it works, your friend will be the only one who can decide that

[@daniellewis3094]

Well what’s this then?!?!?

[@EnglishKiwi]

Some Muppets mp7

[@daniellewis3094]

Yeah bet he’s a right prick

[@EnglishKiwi]

Yeah, he's the kind of mug that buys a compact pdw and then throws a massive suppressor on it

[@Skate3irl]

First