TBS CROSSFIRE SETUP!

[@TMacFPV]

So, what do you think-good move to Crossfire from FrSky R9M? Which would you choose & why? Safe and happy flying to all!😀👍

[@reubenward2430]

Got my xfire two weeks ago after lots of study at the R9 just had too many issues for me the ease of use for Crossfire was a winner handstand

[@Drew-g8f]

Thanks to you SIr I finally got my Iflight Cidora flying with my new Crossfire. I spent 4 hours messing with it and looked all over the internet until I finally found your video. You got a new subscriber here. I have the jumper t18 and the TBS crossfire TX LITE with the nano RX se. THANK YOU VERY MUCH.

[@TMacFPV]

Outstanding Andrew! You're more than welcome my friend and I'm very happy to hear Cidora is flying freely as she was mean to be!🤩

[@tasostsamadias]

I have just bought tbs micro tx and nano rx. I successfully installed them to jumper t16 and my quad following your video. Thank you TMac!

[@TMacFPV]

Outstanding! Fly fearlessly friend 🤩

[@altitudefpvphotography4616]

I would like to thank you once again for such a awesome tutorial on setting up xfire through the jumper t-16! Thanks so much bud you really have made my life easier with your awesome video's!

[@TMacFPV]

You're quite welcome FPV Drone Dragon. Thanks for your kind words and making the time to comment- very much appreciated!🙏

[@kudalkarshadab]

You have the best jumper videos.Easy to understand and straight forward.

[@TMacFPV]

Thanks Skfpv🙏Happy you find them useful👍

[@frankschannel2642]

Another excellent, informative, and well executed video. Already subscribed, so can only like and bookmark while awaiting my own Crossfire Module.

[@TMacFPV]

ooooh, you're gonna love it Frank! Appreciate your support and kind words 🙏

[@droneq8]

Hi... after installing crossfire receiver on my quad... ...it works good flying ....The range for vtx zero No range I have to but the goggles beside the quad to see through it ???

[@turboomni848]

Man I want this Crossfire and Jumper T16 combo. The Jumper will run all my FRSKY stuff I still have and the Crossfire is a step up from R9M. Adios FRSKY ..Great video TMac!

[@TMacFPV]

Thanks Turboomni, Christmas is coming!🤔👍😁

[@DANKFPV]

Hey TMac I was able to get my crossfire working thanks to your video!! thank you so much!!!!!!!!!!!

[@TMacFPV]

Outstanding Dank FPV! My pleasure. Thanks for your feedback! Time to Rip! 🤩

[@WilsondeGuzman]

@tmac awesome video! got my self csrf lite and nano rx se.. and referred to your videos to get my stuff working! keep up the good work! and looking forward for more crossfire videos.. hinting: telemetry scripts, alarm, etc.. thanks!!!

[@TMacFPV]

Hey Wilson! Outstanding & congrats!🤩 I'll put it on my schedule, always looking for suggestions friend-keep 'em coming 👍

[@TMacFPV]

Hey Wilson! Got for you comin' out today friend!👍

[@WilsondeGuzman]

@@TMacFPV saw it! awesome content brother! great analogy btw :) made it easier for me to understand.. rqlyit is :) gonna try to play around with logical switches :) keep the awesome contents coming!!! more power to you tmac!

[@TMacFPV]

@@WilsondeGuzman ahhh, now I see. Forgot you had the Lite and Nano RX! Glad you found it useful Wilson and I truly appreciate your support 🙏

[@ParanoiaTheDJ]

Dude your videos are awesome. Very informative and to the point. Thank you for sharing your knowledge.

[@TMacFPV]

Happy you've found them useful 👍Thank you for making the time to let me know. I truly appreciate it 🙏

[@nolsaepark1]

Good teacher👍☺️

[@TMacFPV]

Thank you 🙏

[@RaafBr]

Hi!!! I loved the video and I have a beginner question to ask... I'm really want to buy the Radiomaster TX16S, would it be the same process of the video to setup the crossfire? Thanks man!!

[@TMacFPV]

Great question! Yep ! Same process!

[@kingofkards1110]

Okay I did this and my quad won't run yet,am I suppose to do something else after this ?

[@mad4dam]

There's no Tools menu in my radio setup.. any idea why and how to solve this ?

[@h2o-fpv623]

Tmac thank u for the video im going to follow the instructions on the video so i can install cross fire .

[@TMacFPV]

Sure thing H2O-Lobo👍😁

[@neilfpv]

Hi TMac. I'm wondering I don't see Tools in my Jumper TX.

[@mad4dam]

I have this same issue, there's no tools menu, have you found a solution to this ?

[@Sackenstein]

Awesome video TMac! I'm going to set up crossfire on new Jumper pro this weekend. I'm sure I will have to watch this video few more times to get it right. Thanks. Merry Christmas!

[@TMacFPV]

Thanks Lawrence! Have fun & Merry Christmas🎄 to you my friend!

[@reubenward2430]

Thanks for the video couple weeks late for me but good to see that I I followed why you suggested keep it up

[@TMacFPV]

Thanks Reuben! My timing must be off!😁

[@reubenward2430]

Mate you're normally pretty on the ball quickest one out there doing it

[@georgeaura]

Can you do a video on installing it to an f3 board?

[@fpvpilot5818]

I Liked your Passion and Helpul videos , I learned alot from your videos. Thanks

[@TMacFPV]

Hey FPV Pilot! Truly appreciate you taking the time to provide some feedback and your support friend 🙏Happy to help. Have a Merry Christmas and happy holidays!😁

[@fpvpilot5818]

@@TMacFPV Merry Christmas Mate.

[@shanrocks1234]

My reciever doesn't bind after it has finished updating, what could I be doing wrong?

[@TMacFPV]

Highlighted comment Hey Shantanu Bhede ! Have you updated your Crossfire module using Agent X also? What type of LED lights are showing on your receiver (red, slow flashing green, fast green, etc.)? It should be blinking a slow green for binding mode. After updating module firmware, if it still does not work, try "Short-pressing" the bind button once to get it into bind mode (slow green flashing LED). If this still does not work, you may need to put receiver into "recovery mode." This is not a big deal. You just need to hold the bind button while you plug in the battery. When doing this, it should start blinking green rapidly (this is still not bind mode). Release the button and press it again for a few seconds. It should then start blinking green slowly (this is bind mode). Hope this helps! Le t me know how it works for you

[@gtattooxv]

Hi Tmac I have to do same procedure with crossfire micro tx? Or something different?

[@TMacFPV]

Hey HG fpv! Should be the same process. 👍

[@dittobimaputra]

Im not sure if jumper can supply enough power to XF when u set @1000 / 2000mW please tell me how much voltage drop? if you're Tx V = 7.5V then dropped into 7.0 its a bad.? do u need a mod on its stick for pincher? lots of guys talk thats too short

[@TMacFPV]

If you need to run 1 or 2 watts (most people do not at 900mhz) you're gonna want to power the Crossfire module with an external battery mist likely. Also, I'd recommend you check your government's rules regarding output power restrictions. Not all places authorize output power greater than 1 watt. I'm a thumber and changed my stick ends to umbrella type. It's final stick ends should be good for both Pinchers and thumbers, however, if you have a specific need you can easily replace them with what you want for just a few dollars (USD)

[@flipfpv]

This is great. Easy to follow and right to the point. Thanks!

[@TMacFPV]

Thanks Erk, happy to help friend!👍

[@eldabo1000]

Did you upgrade to the crossfire because of poor range from the jumper t16? I'm having random drop out with my t16 was considering going with Crossfire.

[@TMacFPV]

Hey eldabo1000! I did not upgrade to Crossfire due to poor range of the T16. I did not find the T16 to be any worse (or better) than any other 2.4 ghz transmitter range-wise. Rather I upgraded to Crossfire simply due to the inherent advantages of using the 900Mhz band over that of the 2.4 Ghz band. Yes, longer range for same power output is one of those advantages. The advantage I find more useful is the better penetration ability of the 900 mhz band over that of the 2.4 ghz band. This means you can flu through and around objects (like trees, your house, etc.) without losing your control signal. I originally started with the FrSky R9 system. used it for awhile. Had a couple "failsafes" with it in some high-interference locations. That, combined with FrSky changing protocols often over the past 1-2 years, I decided to go with Crossfire instead. Crossfire has a "self-healing" capability (meaning it will change power and frequency automatically to maintain your control signal) if it encounters a "weak signal condition." Since I have switched to Crossfire, I no longer worry at all about my control signal. Now, limiting factors for me are battery life and VTX signal. Hope this helps.

[@swimadamswim]

TMAC - need help!! i managed to get my TBS cloud working and then hit update on the TBS lua script in the jumper T16 and now nothing!! the TBS SSID has gone and the TBS Cloud LUA script is missing on the jumper t16 and also on the PC under TBS Agent .. please help !! how can i get this wifi back? thanks mate and always appreciated - HAVE I BRICKED IT?

[@archer4922]

Any clue on what to do if the tbs agent x doesn’t recognize your micro tx? I install agent x open it and then plug in my micro tx and nothing happens. The screen still says plug in your device.

[@TMacFPV]

Maybe a driver issue on your computer? Close out any unnecessary windows/applications which are running. Disconnect any other unnecessary USB devices. Perhaps try running ImmersionRC Driver Fixer? Then try again

[@archer4922]

TMac tried the immersion driver fixer and nothing. Buddy of mine said that he thinks there’s 2 version for windows but I’m only seeing the one. It installed fine, I even uninstalled it and reinstalled it just to be sure. It’s just not recognizing it when I plug in. Ima try to check a few other things. My bud that I bought it from told me The tx should be updated already but I’m just waiting to double check. I know I can check it thru the lua but I haven’t installed the mod on my x7 just yet. Not awake enough to do that yet today lol. Now where’s my coffee. 🤣

[@mysteryedits]

Hi, can I power the Crossfire Module to 2watts from the Jumper T16 battery only?

[@TMacFPV]

Not recommended. If I may ask, why would you want to? 100mw is usually good for a long way, 500mw is usually overkill

[@mysteryedits]

@@TMacFPV Im planning on flying in risky locations and wanted to have the option to ramp up to 2watt dynamically to maintain the link at all times. Im not sure whether to buy the full sized module or get the new Micro TX V2

[@TMacFPV]

Ahh, thanks for your reply mystery! I can give you my experience. I too was thinking as you are now. Knowing the Micro at 100mw was usually more than enough (I also thought I read somewhere within the past few months it could go to 200mw, but I'm unable to find that now--maybe in a comment on my TBS video?). I actually chose the TBS Lite module (to have the extra capacity available should I want /need it). I'd rather have the ability vshould I need it than not have it if/when I do. Having said that, I've never used it above 100mw (to save on battery life). Still use the transmitter battery. But for an additional $75 over the Micro module, for me, it was worth the peace of mind knowing I've got more capability if ever needed.

[@blakegriffin384]

Still get no stick inputs in betaflight from following this to the letter. My diversity nano receiver binds to and is configurable from the transmitter no problem but no inputs in betaflight. My FC is a Lumenier Lux F7 ultimate. I don't believe the FC is the problem because I tested it with a FrSky XM+ receiver and got stick inputs just fine. I don't have motors installed to the SC yet, so I don't know if that is relevant, but it didn't seem to be with my other receiver and I can't imagine it would be in any case. Any help or follow up would be appreciated.

[@TMacFPV]

Hey Blake! I follow everything step-by-step in this checklist, there's no reason it shouldn't work unless you have a defective part: tmacfpv.com/tbs-crossfire-setup/

[@blakegriffin384]

@@TMacFPV I figured it out. The output settings of the receiver in the output map needed to be set to CRSF TX and CRSF RX in accordance with how the receiver was wired. Once I changed this it worked just fine. Thanks for the reply.

[@TMacFPV]

@@blakegriffin384 That's OUTSTANDING Blake! Nice work! All set now to fly fearlessly 😎👍

[@donaldhill2076]

Oh and Tmac Very Merry Christmas and an awesome New Year

[@Freebird_67]

Outstanding 🤪

[@Freebird_67]

Just dumped my QX7 for the T-16 pro and got the XF Full Version

[@TMacFPV]

Nice! Sounds like you dove into the deep end! IMO, you made the right choice! Have fun & Clear skies friend!👍

[@h2o-fpv623]

Yes this is the video I need it to see thank u tmac.ok Tmac I did install cross fire following ur video and came out great .

[@donaldhill2076]

Just purchased a Crossfire Mini Tx and Nano RX. Going under the Xmas tree for me hahaha

[@TMacFPV]

You're a very lucky man! How did you know what you wanted?!😀Merry Christmas Donald!🎄

[@silat3796]

good day sir tmac.. i have something to ask.. what is the settings for crossfire in order to work the gps failsafe rescue if my quad has gps installed. because i was tested my gps yesterday all works well such as gps rescue. but everytime i attemp the failsafe like turning my radio off, the quad will fall out of the sky. my gps module is bn220. my failsafe settings is : failsafe only. everything is works well except the failsafe. i am using tbs micro tx v2. my setting is failsafe : TX set to FS. POS,, and my RX is set to FS. POS also.. what might be the problem ? no one in youtube explain this issue. setting up the betaflight and the radio to work properly.. it would be appreciated if you give me what is happened. thank you.

[@TMacFPV]

kzbin.info/www/bejne/aJ3IgYmlgJWnZ8U

[@juneloko]

im having problems the t16 not recognize my module any solution's

[@TMacFPV]

Make sure the module is seated correctly with the pin connectors inside the module bay.

[@juneloko]

Its sitting on their the best it can be

[@juneloko]

I figured it out the pins on the radio was not lined up to the module that's why was not reading.thank you very much for your help anyways

[@DANKFPV]

Hey TMac when I go to crossfire configure under tools tab nothing happens... the screen gets a little darker but that is it 🤷‍♂️ any advice?

[@TMacFPV]

🤔Hey Dank FPV! First time I've heard of this issue and haven't experienced it myself. So, the only thing I can offer is some suggestions of what to try. Carefully check (don't bend pins in module bay) to make sure your Crossfire module is fully connected (locked in) to pins in module bay (might not be fully seated?). Make sure you have updated firmware on your Crossfire module and OpenTX firmware. Have you followed the checklist provided in this video's description? You can grab it here: tmacfpv.com/tbs-crossfire-setup/

[@DANKFPV]

@@TMacFPV thanks!! I just downloaded it👍

[@toddbeal4373]

Will the set up and updates be the same way with the mini crossfire?? I should be getting that atleast by the end of next month I hope. I ordered it and it's on back order through rdmrc

[@TMacFPV]

If you're referring to the TBS Crossfire Micro module, yes. 👍 I used the Lua script inside the transmitter to set everything up even though I could have used the module itself specifically for folks who were getting the MIcro module (which doesn't have module screen for setup).

[@toddbeal4373]

@@TMacFPV good. Thanks for that. I was hoping you could still update it kinda like the one you have. Thanks man. Always watch when you post

[@TMacFPV]

@@toddbeal4373 Thanks for your support Todd- have fun friend 👍

[@MartinGarcia-ew5op]

Dude which is the range with this setup??

[@neilfpv]

You are awesome TMac! Thank you so much! :)

[@TMacFPV]

Hey Neil! Not sure what firmware version you're using. On my OpenTX version (just upgraded it to 2.3.4 from what I was using in the video 2.3.3RC1), I hold down the transmitter "SYS" button to get to Radio setup Menu. Then on the transmitter, us the 2nd black button on the left (the middle one--Page button) and click it twice. Mine then shows the Tools Page. One of the options on this page is "Crossfire Configure." Hope this helps

[@RCinginSC]

New sub here ! I have a question on behalf of a friend. He recently upgraded to crossfire and has an issue I've never seen. After binding his nano RX, the RX does not appear in the Lua script. Only the tx. Although...it's bound and works. He needs to setup his RSSI/LQ channel but cannot since he cannot access the nano RX in Lua script. He's using the micro Tx so he has no user interface like I do on my TX lite module. Do you have any idea why the RX will not appear in Lua script ? He's tried it on multiple radios while moving the module from radio to radio. He's rebound, and reloaded updates just to be safe. Still not appearing. Any help would be greatly appreciated. Thx RCIng in SC.

[@TMacFPV]

Hey RCing in SC! Wish I had a definitive answer for you and your friend. I do not. Only thing I can recommend is to retrace proper steps. Ensure latest OpenTX with LUA scripts is installed properly. Ensure Crossfire module is updated through TBS AgentX. Ensure when looking for Nano RX in Lua script that the receiver is powered ON (you won't see it unless the receiver is powered ON). Not sure if you/friend of already tried it or not but here's the link to the checklist that goes along with the video: tmacfpv.com/tbs-crossfire-setup/ Hope one of these things helps!

[@RCinginSC]

@@TMacFPV thanks for the reply . Unfortunately we've tried all those steps . I will check out the link. Thanks again. If we figure it out, I'm making a vid for sure. Lol Have a blessed day.

[@TMacFPV]

@@RCinginSC you too have a great day!

[@ror-ys3qp]

No link for TBS website !!!!

[@TMacFPV]

You're quite welcome for the video. Thank you for your kind words. Happy Holidays to you and yours as well!🎄

[@aeryofpv]

@TMac can I run my Crossfire on 2W in my T16 without mods?

[@TMacFPV]

With 100mW you can go 15 km per TBS Crossfire manual. Not sure why you'd want to use 2W, however, Jumper T16 fully supports Crossfire. Under Tools, crossfire Configure, if you leave your "Region" to "Open", you can then change your max power to 2W. Of course, its up to you to know and obey the laws, rules, & regulations of transmit power and frequency within the region you're flying. For 2W you'll need to run it off external battery. You can download the crossfire manual on the TBS site.

[@aeryofpv]

@@TMacFPV You can run 2 W off the normal power in line. Im just not sure if the t16 could sustain that.

[@TMacFPV]

@@aeryofpv oh, so what you're asking is can the T16 actually do what it's designed to do with XF at Max power. You'll need someone who has used it at Max power or willing to test it at Max power to see if it damages the radio. I have not tried it, I have no reason to believe it won't work, however I have no desire to test it since I'll never use it at Max power.

[@aeryofpv]

@@TMacFPV ok i will test it and write you back

[@TMacFPV]

@@aeryofpv sounds good

[@Sackenstein]

I wonder if he ever hurt his hand with his intro.

[@sunsetpark_fpv]

Me too! 😆

[@wilsondeguzman1252]

Hi Tmac.. got my self into trouble again.. got my self a Mamba F405 DJI stack. i can only see receiver related telemetry, no FC telemetry and no stick input. (full details of the issue is here: forum.flitetest.com/index.php?threads/mamba-f405-dji-nano-crossfire.62409/) any tips/help will be very much appreciated.. thanks tmac!

[@WilsondeGuzman]

got it to work! darn it. lol got it working by not following the manual. i moved everything ti tx/rx 1 and viola!

[@goaway4702]

After a seriously botched attempt to get crossfire working on a x9d plus this video gave me all the confidence needed to get a jumper t16. Thanks for posting this.

[@TMacFPV]

You're welcome Bryan, happy to help friend! Thanks for the feedback 👍

[@NicksMind21]

For other noobs like me, I have seen other videos saying for the best performance leave the channels to 8ch.

[@nicktk]

Great video...thank you.