To the Bambu! (3D Printer)

[@pablosalazarcomposer]

The tiny light is because the LiDAR doesn’t work correctly with a bright light so make sure to turn off the bright light before the bed leveling and initial tests are done

[@JurassicJenkins]

Hi, I have a Bambu X1C on order and the first thing I was going to do was add a brighter light! Thanks for the info!!!

[@kitkat2407]

I have to turn off my ceiling lights otherwise I get LIDAR errors. not such a big deal and after the whole LIDAR thing I can turn it back on.

[@internetcancer1672]

Good looking out. I knew this but most people don't spend the time to read before they start using things.

[@dragondrawler1]

You beat me to it. Once I heard her say about the light being so little, came straight to the comments to say it's because of the lidar. Haha

[@suspicious_soup]

I was wondering why I didn’t see that on my x1c, good to know!

[@stefssj1291]

My gosh this seems like the most advanced 3D printer ever!

[@jeffreyepiscopo]

It pretty much is. You can do everything it does manually with other printers, but this comes with everything set up for super cheap. Very impressive

[@filgiupo4853]

1600$ for a printer this advanced is such a good price

[@alex59292]

It's not really

[@publicname]

It's the best consumer level fdm indeed

[@dealincat933]

It’s the best consumer level printer. Just about perfect in every way other than ability to modify. But not many mods would even be needed

[@jessepacheco8067]

That ludicrous speed option has me rolling 😂

[@filgiupo4853]

you need to see it printing in ludicrous, it can print a benchy in under 15 minutes!

[@retrolord]

Spaceball The 3D Printer

[@divingfalconfpv4602]

Hopefully they don't go plaid

[@3D_AIRSOFT626]

In ludicrous mode it can print the whole spaceball one in 10 minutes (for those who don't understand it's a joke)

[@crispyone2564]

After about 30 minutes on the internet looking at this thing, I’m jumping in the car and driving to microcenter

[@garrydye2394]

Don't turn the extra light on until after the calibration...it will affect the calibration.

[@Jordydijk95]

What light did you add on to the printer ? Getting my X1C this week i hope.

[@UrbanTreats]

I just ordered the P1S bundle, cant wait to test it.

[@dia35]

As well as low reflectivity, a surface angled such that the energy is not directed back to the sensor also makes an object harder to detect; another factor is background “noise”-that is, light from sources other than the lidar beam, such as the sun or bright artificial lights that can swamp the reflected beam, making it difficult for the lidar to detect the true range.

[@jeremylemaster6357]

I absolutely LOVE mine! Got it in the mail yesterday after waiting for like 6 months and it is AMAZING! The AMS system is absolutely perfect! It’s the best 3D printer made !!

[@dragondrawler1]

6 months???? That's insane! I ordered mine about a month ago and got it 4 days later.

[@roadshow69]

I pre-ordered the Carbon X1 a couple of weeks ago. They're supposed to start shipping them out mid December.

[@marceloaguiar76]

What extra light is that? Love it

[@michaszkopiak7412]

Where is link to this product

[@petermarkk1408]

No one can speak more words in 30 sec than you! God bless your husband!

[@kotashop3618]

😭

[@kingdongo4388]

There are cuts in the video hhh 😂

[@dr.pixels]

I just watch one video of yours on YT and now even my tiktok feed is flooding with your content.

[@seanguinee8317]

This isn’t tictok

[@scottgarrett6207]

What light setup did you go with ?

[@gudelauneee]

They only added the tiny light because to much light would affect the LiDAR scan

[@Dashie23]

Does the LiDAR work properly with the extra lighting turned on?

[@juliusfucik4011]

Yes, a lidar uses monochromatic light of a very specific wavelength.

[@echo-hotel]

No

[@neotuxxedo]

I have a p1s (basically a cheaper version of this printer) it is by far the best printer I have ever had.

[@JCon_22]

I believe the limited light has something to do with the lidar. I believe excess light can cause incorrect measurements.

[@publicname]

The reason behind the darkness is the lidar, you should not use that light there

[@JJbm4233]

So frustrating I would love to have one of these, but I can’t say I have any complaints about my Creality Ender 3 S1. I can’t help thinking of all the possibilities…… love the channel and the videos don’t stop please There are two ridiculously informative and helpful to go without.

[@dempseydoodles]

Just got my X1-Carbon yesterday! I agree with the lighting… link to the lighting that you used?

[@ashleywhitehead3710]

So it does the harmonic resonance and pressure advance test before every print? Why? It only calibrated the PA for 1 filament as well. I mean it's great it can automate that stuff but it's not implemented very well.

[@8675309eahine]

Do you recommend this printer for beginners or intermediate experience? I’m looking at one and don’t know if I should pull the trigger or not.

[@Waynes-Wares]

I love my Bambu. Best machine ever

[@MalignSociety]

Please only print open source 3D models with Bambu printers. All of your data is vulnerable through their cloud.

[@lordquan31]

I’m curious to how long that would take with say prusa MMU or with your pallet3 pro thanks

[@No0o0o0o0o0]

Prusa prints about about 45-100(rarely)mm/s. the X1C at standard speeds is about 200-300mm/s not including accelerations to 10000mm/s Multiply the print time by 3-5x

[@aandc_0]

@@No0o0o0o0o0 The X1C can actually reach acceleration speeds up to 20000mm/s^2

[@No0o0o0o0o0]

@@aandc_0 Yup it can reach 20k mm/s accelerations but standard speeds are around 10k. So you would either need to change them in slicer to turn on ludicrous mode. Still tans the hide of the prusa machines

[@SaltedBadly]

TBH, its an awesome printer for a beginner

[@filgiupo4853]

for beginners that have 1300 bucks laying around!

[@peterkallend5012]

How about you leave the "for a beginner" part off? It's still a great printer even if you're not a beginner. Most advanced users don't like spending all their time manually calibrating before each print, we just did it because we had no other option.

[@TechyRodsWire]

what light is that?? any link is appreciated thanks

[@jordansommer1614]

A year later and no one here knows what light this is 😂 HELP US OUT OP

[@Amarand]

Which LED bar are you using? Any issues with using the LED bar and LIDAR as someone else had mentioned? I get my X1CC tomorrow. So excited!

[@stiffler8632]

would like to know that also

[@Sjent309]

How did you get one?

[@mixedrealitiestv]

Seems like the Telsa of 3D printing with the different mode names

[@mattheww9656]

Where’s the yellow filament?

[@hrdcpy]

Does filament stay dry in the enclosure?

[@fredthesnail2661]

There's spots for silica gel balls/packets

[@adamarzo559]

PLA stays dry period. I left all my spools in the garag for 4 years and they print just as good as when I opened them. Don't fall for this wallop of drying PLA.

[@GlorifiedGremlin]

Its probably dark BECAUSE of that calibration method, and the light jacks it up 😂

[@Charster007]

Sounds like the girl from wicked makers

[@mechaboy95]

Run it at max speed If your going to run it at standard you might as well have bought a A1

[@Gabriel.Balazs]

Horrible client service... I paid the printer a few weeks, sent them an email for VAT return... didn't get any answer back or any printer so far... when I get the printer I hope that I won't need any services from them with this response time...

[@spicymacdoogle]

A fast 3D printer? Never seen one. 😂

[@sir_christmas_leopold_duckson]

I want one of these so bad. 😩😭

[@Redragonytb]

You have the X1???

[@FormerlyKnownAsAndrew]

This whole thing is ludicrous.

[@88_Renew]

How much energy consumer for 1 item?

[@Ulthane-40k]

10h for that is crazy my x1 could do it in 3h on normal speed just got done with a 8hr print that is about 30x the size of that with abs

[@DB-fiend]

Is this good for printing masks?

[@AppleiOSGenius]

Which lights and controller

[@joshbeck5831]

Where did you get the light?

[@sam_millen]

Landfill print. Printing for printings sake.

[@masonchapman361]

Link to light?

[@electro2606]

Can you use cura or is this a problem

[@K-dizzle]

What printer is that

[@ramim.5856]

Bambu lab x1 carbon check also bambu lab p1s cheaper

[@lordpsi99]

That thing is probably worth every cent... Or it's weight in gold

[@bramblestar9474]

Hi me again could we have a small tutorial on how to color models in the software or a reply explaining how

[@vernonallred6398]

I wish I knew how to put lights like that in mind. Do you have to open the unit or use an outside source ? Any one have idea how?

[@matthewpecci4206]

Does the Carbon x1 go to plaid on Ludicrous speed?

[@GROGU123]

Ahh you left me hanging!

[@kaeseritter1482]

Where can i get that light

[@jnicolettebailey]

My next printer

[@herb.ink.8881]

Wow that printer is nice 😅

[@BunglowBill]

Honestly 10Hrs for one flat toy is not impressive.

[@Jeffa101]

What is the bed size of the printer. Debating about buying one.

[@123axxi7]

256mm cube- it's got some hiccups like any new product but it's the most bang for buck of any printer near it's price

[@bigjohn7932]

10hours?

[@supercamaroJoe]

My daughter is looking at getting a 3d printer. Could I get the name of the one your using? Thank you

[@wk5199]

Bambu Lab X1 Carbon. There's a cheaper version labeled X1. These aren't cheap though.

[@Ario433]

Hello, what software do you use?

[@No0o0o0o0o0]

The program is called bambu studio

[@shawnalfaro6943]

what is that light?

[@mir.9805]

I need this

[@Average3djoe]

Is it complicated to work the AMS?

[@NorwayVFX]

It's actually super easy and user friendly.

[@NekoTheLover]

$1,400 printer. Looks neat, but steep price.

[@GUNMETALGUYUSA]

Jeez Louise... Agreed

[@No0o0o0o0o0]

Well worth the price if you are serious about printing. Nothing else comes close for the price if you print multicolors, multi materials like carbon fiber nylon, PC with enclosure.

[@123axxi7]

It's worth the money though if you use it regularly, prints on average 5x faster than my modded ender 3s with way less headache

[@darkwolfx333]

I want that light! Can you pm a link?

[@mic4ch]

Litufoto r6

[@KaizenAloha]

I’m sorry but 10 hrs to print an alien is absurd! How fast does ludicrous do?

[@vgbaccer3795]

Not really to me because that’s like coming home after school for me after the bus

[@Giforgif]

most of that time is spent swapping filament colors and cleaning the head. im sure just single filament would be

[@peterkallend5012]

That's going to poop...a lot. You'll probably have more filament in poop than the model.

[@TheSdfkjh]

Fast... 10 hours later...

[@bleach_drink_me]

The smart features are cool and something i cant wait to see hit the voron and vzbot. Granted we do have input shaper on all klipper based printers which helps with the vibration. We also have the ERCF so that covers the muli filament. As for bed calibration we have a lot of options for bed leveling. So that leaves Lidar...

[@PencilParasite]

Litufoto ????

[@ahengofficial7319]

The yoyo

[@johnlocke3481]

Can’t wait to see that in the ocean

[@TheBrokenNomad]

Part 2 (I hate it when I have to go looking for them) kzbin.infoz1eZnByMq9s?si=JcCYfCA2OZex_iUx

[@technophant]

Plaid speed

[@mszoomy]

Man I'd love to have one of these! Amazing. I printed this alien the other day in MG Chemicals glow in the dark green which no love because it's actually green instead of whitish but it glows too

[@Senlistic]

I'll give u $10 and a stick of gum for it

[@freelectron2029]

Wow. Talk about being oblivious to how the machine works. Lidar uses light to calibrate. By adding that light you have ruined the entire purpose of buying the top end model. You go girl....

[@АлексейБереславский-и3е]

Ну и хрень вы печатаете

[@ConspiracyLoon]

Just make sure anything you print is disclosable to 3rd parties…!!!

[@Cringespotted]

Waste of filanent

[@ImFrenzyLol]

her voice: 40yr old hre face: 70yr old

[@Martial-Mat]

Exceedingly interested to see how much waste this produces and what it's like on fast mode. I've been told the filament change speed is a massive problem.

[@daliasprints9798]

It is, but it should be fixable on the gcode side. They seem to have just picked really conservative parameters that err on the side of wasting lots of time and filament vs risking incomplete purge, but I think with some tuning you could vastly improve that. OTOH a lot of the appeal of this printer is supposed to be not having to tinker to get stuff right...

[@Martial-Mat]

@@daliasprints9798 Fair points. Given that it uses bespoke software, I very much hope that the change is a simple feature of the software.

[@No0o0o0o0o0]

​@@Martial-Mat The software is open source (on git hub too)and based on Prusa slicer (which is based on Slic3r). The filament purge can be adjusted in the Bambu studio slicer. It's called flushing volumes and right next to filament section. default is 280mm but can be easily adjusted. If there is 335meters in a 1kg roll then its about 0.28meters per filament change on default. Source: I have the printer and AMS.

[@Martial-Mat]

@@No0o0o0o0o0 Thanks for that. The amount of filament change would surely depend upon how many times the colour needs changing?

[@No0o0o0o0o0]

@@Martial-Mat ​ Yup, and depending on the model you can have multiple filament changes per layer and even a "purge /flush into infill" wont be able to keep up and you will have waste, and a purge tower. Of course with the conservative 280mm settings it is less likely to have color bleed when switching filament. It's usually much faster to print in a standard color and paint after post processing. That model would take about 2hrs 15min if done in a single color at .2mm layer height and .4 nozzle. Her version takes 10hrs. Also the speeds are percentage based. silent 50% standard 100% Sport% 124% Ludicrous 166% So there is a way to speed some things up but once the color changes happen its about a 1-2min for the color change. There is another neat thing you can do if you have filament of a similar print temp like PLA/petg and tpu. IE. You can mix a figure with rigid torso and flexible limbs. Or you can have break away filament for supports. I rarely print in multiple colors/materials unless I am making multiple similar items on the build plate.

[@robertpaws]

And I thought my ender 3 was cool 💀💀

[@officialsquadrilogystudio]

"Ludacris Speed"... I see you're a printer of high culture.

[@gabeplays9441]

I regret not buying a X1C during the Black Friday sale.

[@Shenanigans3D]

that's quite advanced for a consumer printer.

[@rickvee4489]

Link to light?

[@gudelauneee]

Litufoto r6r

[@gudelauneee]

Could be that it’s another one. Because the r6r is to short I think maybe you look at litufoto for another version. Maybe r6

[@BanglesAU]

These printers are magic..... I love mine. It has a few annoying errors it like to do, but its still worth it!

[@c0mputer]

I don’t get why adults print toys. Like a lot of KZbin 3d print channels have toys on shelves in the background. They just print a bunch of toys and look at them? Adults do this?

[@chrinamint]

I want to know about that alien file to print.

[@M4r10h]

Why you chose that horrible model among the many more available in multicolor...ugh

[@soniccinos]

80 grams of the object and 250 grams of poop….

[@MrEh5]

How expensive is this printer?

[@menacingdonutz]

$1500

[@JezzyCrazyTV]

😂😂

[@ramim.5856]

and no result! I don't like the shorts!

[@TomsPropertyCare]

Tiny light is to help lidar do its job.

[@johnnyp.1804]

How do i get it shipped to the us?

[@raffaSUPERninja]

Does this happen on th p1p