Toast is FIXED... and Sounds Absolutely INSANE!!!! (Like a Top Fuel Car)

Remember you can use code "RANGER" for a free PPV ticket to the Danger Ranger 9000 on August 14th on any purchase over $75 at www.summitracing.com
Hot off the press CLEETUS SHIRTS!!! Grab yours here - www.cleetusmcfarland.com
Toast is about to be the most insane burnout car we've ever seen...
Our 2021 Sponsors:
www.holley.com
texas-speed.com
www.motionraceworks.com
www.nittotire.com
www.summitracing.com
heatwavevisual.com
Check out our schedule for 2021 here - www.cleetusmcfarland.com/year...
Cleetus2 Channel - goo.gl/Ph2wyo
Holley's channel - / @placesholleypoops9094
**Social Media:
Instagram - goo.gl/LZvy5e
Facebook - goo.gl/gdwhh1

[@CleetusM]

You guys are not going to believe the freaking $2,500 boat James just showed up to the shop with...

[@AxlMetcalf]

flamingo paddle boat with a 250 on

[@freedomfox8183]

I will ... Just tell him not mess it up to bad before he returns it the lease is only until next month lmao

[@jaypop7385]

Can only imagine with James prolly a little dingy with 100 shot of nos 🤣🤣🤣

[@graphsicimagevinyls5882]

im scared now...he only paid 2500....there's too much left over for Mods...

[@jackmagnium6115]

you need to convert toast to drag spec cause that thing would be a beast

[@finalcallracing]

Loosen all the butterflies on the throttle shaft and tap throttle shaft side to side. That's how you center the butterflies and should be able to idle about as low as you want. You also need to use leak down gauge on barrel valve for proper setting. Im sure you can google how to do that part. I don't want to write long paragraph on how to do it.

[@jacktearman7134]

Everybody like this so he sees it, this guy knows what he’s talking about 👌

[@benbeliew9482]

@@jacktearman7134 I second this notion.

[@Jonathan_Camps]

No clue what he’s talking about but he’s got a dragster in his profile picture so i’m sure he’s right lol

[@LiveeviL6969]

Make sure to use some Loctite on the small screws when done. You don't want them vibrating out and dropping down in the intake.

[@PetesGarageandperformance]

I just checked out your channel, you have some really nice builds!

[@ccrx2640]

“U don’t want a Wheelie Gap” don’t care who u are, that was funny..!! 🤣🤣🙌🏼

[@Jordan_Rush]

James callin Ole Cleeter out! Hopefully the mods/changes to mullet will improve traction. Kevin is the man, so I’m sure it will be ready to rip.

[@buschlightforlyfe9049]

literally bout to say the same thing brotha

[@turismo-russdog8134]

Hahahahaha Need a t-shirt with that quote!

[@turismo-russdog8134]

With Dr.TuneEmAll in the background💙

[@roughndo80]

I've been laugh'n for 5 minutes because of that comment. That was a hardcore comeback.

[@madimart]

"Nothing like overheatin' a brand new engine to get her.....rippin' right." When Cleet like broke character and paused in the middle of that I died

[@TheXxxcodexxx]

4:23 just incase you want to hear it again. lol

[@jimrustle643]

*TONIGHT ON TOP CLEET* A giraffe and Jackstand dial in Toast, the giraffe explains the design and efficiency of the massive intake stack, and we look at a big hole for about 10 seconds. (Top Gear music)

[@96kylar]

And on that bombshell...

[@dancearoundtheworld5360]

THAT PRODUCER DESERVED IT

[@ryanlong4021]

Keep this a thing my dude 😂

[@ellisberry8747]

Do more of these definitely lmfao

[@InsideOfMyOwnMind]

Be sure to tune in next time when Cleetus says, "FIRE ME UP!"

[@johnathonfranklin1127]

“You don’t wanna wheelie gap dude.. my car hooks” if the best diss I’ve heard in a while🤣

[@Josh_D03]

This car needs a set of slicks and a trip to the drag strip 😂. Be cool to see what itd run imo

[@Raxcsdecoon]

Mullet would probably out run it. It'd probably blow to the moon unless they could get it to grip and stay down

[@leonrawlings4633]

@@Raxcsdecoon I mean toast is a burnout car and mullet is a drag car so he would easily be out gunned by mullet

[@redsage6550]

@@Raxcsdecoon Also mullet makes more power. But if this thing was actually properly setup for drag racing i guarantee itd be a very close race

[@emmettwalker8268]

Toast could be a seven second car

[@leonrawlings4633]

@@emmettwalker8268 yh if he completly changes most of the build

[@Unknownuser19546]

As a structural steel fabricator, that coping machine is priceless for hand rail, and anything dealing with pipe or tube!!

[@eriklarson9137]

As a person who watched the video, I agree.

[@SuperCRF150rider]

As a pipe welder, this is only really suitable for railing or cages like that. Most pipe we work you’d need a 12” wide bitt. If that was practical you’re damn right it would be amazing for pipe!

[@justinoliver1984]

@@SuperCRF150rider RIGHT!!!

[@southcoaster4142]

Yes sir .

[@haresplitter]

When I was fabricating hand rails we had a hydraulic notcher.. no grinding or further prep required.

[@freesexyew]

TY is a great personality for this Channel, Looks like the dudes a great fit to work at the freedom factory, he throws off good vibes.

[@LolPepperGate]

He's a good fabricator as well. They needa toss him a camera way more often. Having fun and racing...and shit is cool for views on channel...but fab content and build content into depth is way more interesting. Only saying that as I've built rockcrawlers on and off the past 12 years.

[@MADTAS4]

@@LolPepperGate I agree, more Ty Fab vids 👌

[@ford73broncoboy]

Get a dedicated barrel valve leak down tester for the barrel valve. 75%-90% leakdown on blown alcohol K-Valve app. Butterfly gap should be .005"-.010" fully closed. A well tuned blown alcohol engine will never idle below 1500rpm. Surge is the pump not spinning fast enough to keep the head psi at the nozzles. Its understandable though in an insane rich engine like the burnout cars though as they use the fuel for cooling

[@pro-seriesfabrication3810]

Yup. The leakdown tester from goodvibes is cheap and worth it if you're gonna mess with mechanical fuel injection

[@RedK20Civic]

Toast. Body of America and heart of a Aussie

[@paperboy371]

Freedom from down under…

[@TnlVsnMedia]

Vegemite toast

[@c0c0asauce]

That sounds like an EXTREMELY unhealthy individual haha

[@Xplicid]

Bald Roo 🦅 🦘 ….. I’ll see myself out

[@beeeennnnnnn]

@@TnlVsnMedia perfection

[@samhardy3341]

Cleetus, you'll need a leak down tester for your hat/barrel valve. Trust me im an Australian 👌

[@isaiahollis3779]

It feels like not long ago I was watching you and Cooper stick duck calls and a pro charger on a leased Ram 1500. Love the progression your channel has made, and I’m glad I’ve been able to watch it happen.

[@promodvette]

Its actually insane how much that thing does sound like a fuel dragster!

[@dancearoundtheworld5360]

Like an s600 half the price of the real thing

[@au1317]

When he whacked the throttle it was uncanny

[@kkush7577]

It is a old top fuel hat thats prob why

[@jjlegend3922]

Literally sounds like every other build on this channel. Just slightly louder. Oh wow.

[@nathanhearld474]

That's because it is a top fuel dragster

[@evanking920]

Spectator Drags are the future. Especially on an oval like the Freedom Factory

[@danhard8440]

ya i have done it and its way fun believe it or not i raced a 1993 Saturn 1.8L manual with fat tires and would get to third round because i didn't have to slow down i would just fly through the corners like nothing lol

[@sam_s_]

Tracks have been doing them forever.

[@dookiebooger9967]

I wish he would start a weekly late model series at the ff like what they did back when it was desoto

[@evanking920]

@@sam_s_ I live out here in F-ed up SoCal, we need many more track days here. Especially when the EVs take over. The last haven for the Internal Combustion Cars will be recreational racing....The Future capisce?

[@robertbragg1469]

I went to a spectator drags 20 years ago. More like back to the future without the DeLorean 😂🙄

[@gasolinedreams2691]

This is a solid team, James, Ty and ole Cleet. Good stuff.

[@fredericrike5974]

Look out for that George! FR

[@1STGeneral]

Don't forget part time George aka the Squirrel gotta have entertainment and he might do something useful 😉

[@bigjim8088]

James looks like he is the Engine Whisperer when the is having Cleetus adjust the 🎩.

[@MichaelOfRohan]

☻

[@franknbeans3651]

You need a drag car with a massive blower just like the one on toast!

[@Mulletmans]

Yes a big block car with a massive blower.👍

[@BILLYRAYBOB9789]

Blow the blazer

[@Magpies_corey]

Definitely should do it to the Blazer

[@patrickr2686]

A crown vic would be a great car for that build

[@patoldude]

Seriously hope they turn the Blazer into a blown drag car.

[@Thereis1]

yo cleet, get a set of feeler gauges and use those to tune the blower hat. it makes it way easier to set the butterflies start with 0.030 so i'm told

[@pro-seriesfabrication3810]

Not enough zeros. .003" sounds more realistic

[@Thereis1]

@@pro-seriesfabrication3810 you're right damn fingers slipped lmao

[@StonkeyDomp]

He was using feeler gauges in the video.....

[@lilhick3]

I’m so glad to hear Derek is coming, no disrespect, you guys rule but he’s sweet, and I hope Kevin Is going

[@Illbusa815]

"My car hooks. .. You don't wanna wheelie gap!" 🤣 Jackstand is ready!!

[@Seventeen76]

Hyped to hear Derek of Vice Grip Garage is gonna make it. That a cool guy.

[@dagrumpz8661]

The dynamic between Cleeter and James is by far the best part of this channel. Seems to me like they bring out the best and often most competitive sides of each other.

[@NoMatureContent]

"I have NO idea what I am doing right now." Yeah, everyone who plays with stuff like this feels the same way.

[@sealsniper4206]

about time toast is running I hope y’all get him dialed in definitely one of my favorite cars to watch.

[@FTR_Performance]

You need to check and see what your barrel valve leak down is. That will help it idle also.

[@JaredR1996]

If possible can we get Toast and the Donk from Hoonigan in “This vs That”? That would be sick in my opinion

[@ZenoClipz]

That would make a good burnout race

[@solatyn]

Toast doing more than 20mph would be sketchy af 😂

[@Timmayytoo]

@@solatyn Exactly

[@michaelcousins2526]

Mullet v. Hoonicorn would be interesting.

[@dookiebooger9967]

Seriously tho cleetus needs to come back with something from his fleet. I vote Leroy but I'd happy with anything he owns honestly

[@ronbuckner8179]

The "Warbird" sounded like an outback Aussie stomping through the bush. You need to Toast jamming like that. we could hear it for a mile before it arrived.

[@sunnycyanideup3604]

"Nothin' like over heatin' a brand new engine to get her.......rippin' right" is probably the most Florida man thing i have ever heard anyone say. Lol cleeter is the man.

[@josephernest91]

"You want a wheelie gap?" - Jackstand 🤣🤣🤣🤣

[@denisohbrien]

PRO TIP on individual throttle bodies to seal them (to use a seperate circuit for idle) some grease in the runner, paint on the edge of the throttle, shut them. let them sit a bit then open, , let it cure, and raserblade off the excess. use the paint to fill all the imperfections.

[@FastasFox35]

16 seconds in 71 likes. Never a bad Cleetus video

[@zacharyreichert5035]

Heh, I haven't seen an old horizontal mill like that in 15 years. Rad.

[@Sinixstar]

So awesome to see how the new shop is coming together. Everybody seems super psyched, lots of stuff happening. Great to see.

[@IamLomax]

Love seeing updates on the 240!

[@reggiekilgore7448]

Love it those tools will really help on time and money LOOKEN BETTER EVERY DAY HOOOOYAAA CAN'T WAIT

[@Goat-vy2bi]

What a perfect end to my day! THANK YOU Cleeter crew ❤️🙏🏻

[@Pyle81]

Those notching machines with a sharp cutter are sweet. Its amazing how much more you can get done in a 10 hr day with one of those. One guy measuring and cutting and another guy welding as fast as they are cleaned up and you can knock out some serious work fast.

[@jimmarburger611]

Thanks for the update!

[@Mr120volts]

Vice Grip Garage is gonna be there? Oh man!

[@redbeard4671]

For what it’s worth Cleeter, that was some seriously legit intro for the Freedom Factory promo

[@oneshotpete6.591]

JackStand “ you don’t want to get wheely gapped “ 😆 😂 whatta a legend

[@Blacktop73]

It Awesome that your able to get a bigger shop and able to hire more help to keep growing your operation love watching all your videos

[@jamesmartinez3635]

Ole jackstand jimmy ain’t playing around when he says you want that wheeliegap! Lol 😂

[@thatfordguy2268]

It would be hilarious to show up in an old school Chevy S10 with a 4.3 Vortec high output and just decimate that field of rangers! LoL 😂

[@timothythompson3029]

When you tap the spark plug hole cover the tap in grease. The chips will stick to the tap. Also put the cylinder at top dead center.

[@timpigeon7788]

Glad to see the new shop in full swing

[@r7kelley553]

He said "that's a tall task" but what he meant to say is "that's a Taal task."

[@drewanderson8279]

Yo cleetus the mullet is really comming in long! Keep letting that shit grow! I wanna see you at the next indy cleetus and cars with a mega party flowing down your back!!!! Come on brother!!

[@jamiemuncy2219]

Liven the new shop I see. I don’t do a lot of other people’s cages but I do my own & a few buddies and the tubing notcher is a must have so I got one & I LOOOVE my pipe bender💪🏻 Nothing like having a job you like or love but having fun like y’all do helps 110% Stay after fellas, looking great💯💪🏻💯

[@brewdinyork84]

watching you guys on your episodes is better than any car stuff on TV. Thx for making awesome content

[@travisdrury4625]

I’ve been missing that for like the past 7 months

[@chadbanks7611]

Hey man you need to call Clay Millican nicest man in the world besides you I'm sure he would give you some great advice on that hat

[@niceguybille]

That dude is all over my feeds and buddies with the PFI guys, surely they’ve met, yeah?

[@brandenday3729]

You guys need to invest in one of our Mazak VCL-T100 machines if you’re doing a bunch of notching in tubing. Full CNC laser machine with rotary unit and bar feeder. You could notch all the tubes on all the ranger roll cages in less than an hour. It does flat sheet metal as well. Keep up the good work! You guys are awesome.

[@benjaminmerritt769]

Toast cranks: bald eagle noises & kangaroo screams.... Something mighty Aussie sounding about that big block.

[@brandongreene3213]

Hell yeah toast! Missed this rig. "What, you wanna get wheelie gapped? My car hooks!" James you savage lmao

[@tamarastephenson8985]

It really has been hooking watching I TV on drtunemall

[@jayharris8585]

next year is the last 2k in houston and it’s my first time coming i’m hoping it’s one of the best

[@johndamjohn]

It was really nice to see a car video. Thanks.

[@aaronpantoja2251]

Look up some stuff called DAG 213. You put it around the blades when they are closed, let it dry and then crack them open to get a perfect seal once they close again. I use it on old multi carb setups maybe it’s worth a try on these.

[@MoleDoesStuff]

It took me some finesse when rebuilding my motorcycle carbs and resetting the throttle plates. Took repeated adjustment and seating to get them to be perfect. Any slight rotation in the bore won't allow it to sit right as they are cut at an angle where they mate with the hat in this case. I also could be totally wrong based off my anecdotal experience.

[@bigjoetheelectrician]

*HAPPY BLOWER SURGE NOICES 🇺🇸🦅🇺🇸🦅🇺🇸🦅🍞

[@mikebonge7206]

Really love the new shop and equipment

[@jeffsgarage8414]

That notcher is 👌👌 im still running the ol hole saw style but daaaaamn.

[@mpz375]

James has that look on his face he all get when the office ds come poking around the shop.

[@steveanderson5888]

That is a perfect job for George he ports heads all the time

[@a-a-rondavis9438]

None of them have legitimate experience in this type of stuff. Makes sense they have a little bit of time to tune and fix things before making real headway.

[@htownmoto3803]

Absolutely stoked @vicegripgarage is a regular part of these events

[@daddosjeffery]

Looks like you have the work shop sorted, love the channel and keep it up mate 👌

[@scottbrown1300]

Aussie here, thanks for two in a row for my boy Toast!! Can’t wait to see the tyres fry at the FF, I think he needs a re-wrap perhaps similar to warbird, something that resembles toasted bread etc. Well done fellas, you’re so damn close I can taste it. Thanks heaps from down under👍

[@rileylilwell5201]

To allow a small throttle opening/low idle; can you have a throttle mech that opens one flap for the first few degrees, then hits a stopper on a second arm that opens the other two? I explained that terribly but hopefully someone can understand🤣

[@otm646]

If you've ever worked on a quadrajet or anything with vacuum secondary that's what they are there for. Trying to to do fine air control with such a large butterfly is very difficult, that's why a fuel injected car with a throttle body uses an idle air control valve. It's a small metering passage which is control by the computer.

[@NoWr2Run]

RILEY, NO YOU CAN'T.

[@NBSV1]

They make hats like that. That’s what the Hoonigan guys put on the supercharged donk they built. It uses one throttle blade for initial opening so it’s smoother and more controlled. Then the other two catch up and kinda act like big secondaries. Although it is way cooler with a top fuel hat…

[@littlelifters7543]

What about an IAT valve.

[@NorthernChev]

I prefer even a thrown together messy video like this to (almost) any of the mini boat content. Only because the mini boat content is the SAME thing over and over, aside from the Key West trip.

[@davidschneider7053]

I wish I could put more likes on this comment. I fell is love with this channel for the love of racing and tuning. Dont dilute the content!

[@a-a-rondavis9438]

His consistency throughout the year means that not every video is a 30 minute dirty wrenching video. He has many more interests and pursuits than to sit on top of or under a vehicle and fix it in hopes to run a half-decent time outside of race season. He likes anything with a motor and a way to steer, he will surely make videos other than with his crowd pleasing drag cars. I think a nice mix of both is optimal. Having one or the other is bland and isn't consistently good content. This part of the year is best spent having fun and doing it with your favorite people and toys. Wait till after the heat of the summer, he has millions of dollars invested in his cars, toterhome, Freedom Factory, etc. He didn't do all of that to screw around with.

[@gorgewashington1216]

nice to see toast start and the 240 going prept next step burnout !

[@promodracer2191]

You need to center blades buy loosening screws on butterfly's while they are closed. lightly tap them shut as you hold shut then tighten them. then set butterfly's to .005 to .012 to allow less air. then work on fuel.

[@Bigninjon]

Ooooo VG is going to be there, should be fun, probably not! Lol

[@magnakonig8905]

Prob too much throttle into the corner....Perfect!

[@al73r]

Between your crew and the boosted bois .. yall make a guy wanna move to florida to get in on that race scene. Have a blessed day (working on my southern charm)

[@killbilly069]

This team operates better then any well oiled machine I've ever seen. You the content guys.

[@babbo666]

If you have ignition control, just keep winding back timing till it’s firing after TDC. This is how we used to do it with the motors using slide throttles. Sometimes the leaking just cannot be avoided so you need to ‘load’ up the engine a bit. Not something you would do for a road motor sitting in lots of traffic but fine for one like this.

[@Mr120volts]

I'd like to see Junkyard Digs in one of these races

[@Chudhole]

Yeah Kevin and Mook would be fun to have at an event

[@adammoore5686]

When are you doing cleetus and cars bradenton? We made it last year and my son keeps asking what the date is.

[@delorislee6377]

Hey I was rooting for that ranger to win that race the last time I have a 94 ranger V6 I wish she was running right cuz I just bring her down just to be able to go around the track keep up the fantastic work love watching your videos with my hubby he can work on them I can name them LOL

[@OVERALL_PAUL]

Shop safety always make sure all tools are off the car before starting just in case one falls into the fan belts making it fly out and possibly injure somebody I've had this drilled in my head for years from my beloved uncle who has witnessed a guy getting injured not taking the extra steps years ago please be safe I enjoy your videos

[@glennlbs9931]

Can we get a Chevy race soon? I'm starting think Cletus is turning to the Dark side with ford.

[@CR7659]

With what, though, a bunch of Sonics?

[@chrisoftedahl5299]

old chevy citations

[@mikemc7704]

With feelerblades at the bottom of the intake vents It should be 1 to 2 thousands. Just move the blades around to seal the intake.if the gap is to big. I know you guys will figure out. I have a nostalgia alcohol funny car. I will deal with this all the time.

[@AussieMaleTuber]

God bless Armerika, Cleetus and your KZbin Community, cheers from Oz!

[@ldmcnutt]

You’re making amazing progress in converting your virtual presence into a physical presence that will give you a sustainable business for the rest of your career. Congratulations!

[@haydona1845]

Does toast have zoomies like the tf dragsters? If not I think that needs to happen

[@Matty.Hill_87]

That would look and sound insane

[@haydona1845]

@@Matty.Hill_87 I agree 100%

[@alyssablake100]

Would sound like shit.open headers sound better on these setups.zoomies sound good with 10.000hp not 15-1800

[@haydona1845]

@@alyssablake100 There is no way you have heard a 2000hp setup with zoomies and thought that sound was shit. James truck makes 400hp with zoomies and sounds badass

[@briocon7]

actually, KZbin makes toast sound like a high performance lawnmower. but, i’ll trust you on this one.

[@rvfixerguy]

I think it has more to do with his recording device than youtube.

[@sethstaley17]

Pro tip: use packing tape to make to the tolerance tighter around the flaps, using a little brush with super glue works really good too if you’re worried about it eating the tape

[@JohnRolyAU]

Went through Castlemaine on the weekend, past the Rod Shop.

[@BillMeyerComm]

Awesome builds everywhere! But gotta know, How did Ty get those 2 shiners he's sporting....???

[@bigpolska6085]

Its from non stop welding n fab with the torch n stuff

[@KenG....]

He was talking when he should have been listening.

[@tyebraun]

That’s just my face lmao

[@jdub2606]

Don’t think I didn’t catch that little WD reference with the durability of the Hilux comment, James. Lol

[@renster143]

Is it really a WD reference when it's pretty much universally known that they are reliable vehicles

[@thomasjohannesen1003]

Zoomer moment

[@danielfrazier840]

Top gear uk

[@jdub2606]

@@renster143 and WD just had multiple videos recently with the hilux. And they all watch each other’s channels. I’d say that’s just as likely of a scenario… don’t ya think?

[@roblong1638]

Quality Mittler Brothers notcher you got there. Great units!

[@jordanbogue1634]

Believe it or not one dream car i want is a ranger. Such a boss of a small truck..... also cletus there is a nice el camino in my area

[@gavinpeepeepoopoo992]

you should put toast on decent slicks and take it down the strip

[@brians48now]

And change the transmission and the entire fuel system and the brakes and the entire suspension and the rear end and the engine management system. And then change it back to be able to be a burn-out car? Not going to happen.

[@williamuskoski1385]

@@brians48now don't need to do all that. Maybe some gears but that's it

[@gavinpeepeepoopoo992]

@@brians48now it was just an idea bro chill lmfao, no need to get upset.

[@brians48now]

@@gavinpeepeepoopoo992 Where do you get the idea that I'm upset? Quite the contrary.

[@brians48now]

@@williamuskoski1385 A burnout car is nothing at all like a drag racer. He'd have to change everything. You don't need heavy duty parts on a burnout car. Look how many diffs and and transmissions they've broken using very good parts. The elco doesn't have any of that because it's not putting that same kind of stress on them. If he put slicks on it and changed the rear end then he'd have parts all over the first 60 feet of track.

[@fardinm8196]

Ranger prices are about to skyrocket because of the Danger Ranger 9000

[@blahblah8037]

Nope

[@rickscott6239]

Nice that you're investing in tools that will make some of these projects come together much easier and will be around basically forever. Great job Cleeter, keep up the good work, and I don't mean to slight any of the other guys that work for y'all.

[@bepbep7418]

They came with the shop.

[@gunsandcommissions]

That thing sounds AWESOME!!!

[@cutlass8783]

You need to do a burnout contest where only the aussie cars compete against eachother (with toast included)

[@TheJeracuda]

they only have Killa B left ( at least I think they still that car) as Warbird has been sent home

[@cutlass8783]

@@TheJeracuda I know, I'm saying in the future when the Australians can come back to the US

[@Tim_the_Astronurd]

so toast vs killa bee?

[@S550STANG]

@@cutlass8783 He will most likely take toast back to Australia before the Australians are allowed international travel. Pretty sure they can't travel until 2024

[@boostedperformance7762]

James went from being a Nitrous guy right into a turbskie guy that 240 is gonna be a ripper!!..

[@markthegunplumber8376]

i've always said " NOS was invented by engine parts companies to sell more parts" after NOS does what it dies best (grenade engines) It worked too.

[@tommonson6288]

I was driving from Fla. back to Mo., stopped at a Quality Inn for the night, walked in to get a room an the desk clerk said " Is that the new Cleetus shirt"? I turned around, so he could see the mullet, an said " Fire me up", we both laughed like crazy...Tom

[@bruceplumisto]

Thank you for the shop content