The Amazing Sounding Rode NT-USB+ (vs. Sennheiser Profile)

[@footagefighters]

Tom you have a one of a kind KZbin Studio, these colors are so mesmerizing to look at - never seen anything like it and I truly love your style.

[@tombuck]

Thank you! It really means a lot to hear this! Totally made my day 😁

[@Iamnobody90]

@@tombuckI agree Tom. Your t shirt and watch strap colours also always look great with the studio,which make the videos look more vivid and vibrant.

[@devlinwatson9]

This video sold me on the Sennheiser Profile. Both mics seem great, and the Rode honestly sounds slightly better in my opinion, but the physical knobs and small form factor won me over on the Profile. I'm using it for calls while working or gaming, and having a relatively tiny mic that doesn't need a pop filter, really makes for an unobtrusive solution for really nice sound. The Rode would be my choice if I were recording, but for calls while doing other things, the unobtrusive design of the Profile is winning my money.

[@tombuck]

This is my conclusion too. I prefer the sound of the Rode in a side-by-side comparison, but the functionality of the Sennheiser is tough to beat (plus it does also sound awesome).

[@techmed-rainer]

Danke!

[@seaweeded]

I don't care for any of these streaming/recording setups, I'm only here for the terrible jokes.

[@CuriousDerek]

Terrible jokes ftw 🙌🏼

[@serinadelmar6012]

😂

[@StumpsMC]

I just purchased the rode as I couldn’t get my hands on the hyper x quad cast.. this video was extremely helpful for me and I’m sure others who aren’t familiar with this mic! Top video mate!

[@tombuck]

So glad to hear it! Hope you enjoy the mic. Definitely take some time to explore the processing options in Rode Central to dial in the sound and stuff.

[@eecorr]

Thank you Tom for all the information you have provided me with your videos.

[@tombuck]

Thank you so much! I really appreciate the kind words and support! 🙏

[@cap2574]

Just received my NT USB+. I already had the previous version and it was on par, maybe a head above the Blue Yeti. The USB+ though is on another level... Love it, but you are correct, it picks up every squeak, pen drop etc. Definitely need some noise cancelation, but I am loving it so far. Love your video's by the way, very informative and captivating. You have an infectious personality.

[@4band1t29]

Did you ever find out how to get rid of the back ground noise even when just playing games with friends or wanting to stream and don't have a compressor to compress the background noise?

[@LucyWhiteheart_]

@@4band1t29 and im here to ask you if since those 3 weeks, did you find a way ?

[@flashmutex]

The Rode NT-USB+ is more expensive because it has much more functionality built in. It needs to be properly setup with the RODE Central software, because that's where you actually program the on-board chip with the following features: "compressor, noise gate, high-pass filters and the legendary APHEX® Aural Exciter™ and Big Bottom™". After programming the chip as desired, no software is needed because the settings are stored in the onboard chip.

[@francoisguillon4766]

So you think a rode nt usb mini with these same features would be better than a senheiser profile for voiceover ? Thanks

[@flashmutex]

@@francoisguillon4766 Yes. It's a good mic. Make sure to adjust its high-pass filter and compressor to get the sound you want. Also, make sure to get close to it to get the bass of your voice. Putting it on a boom arm close to your mouth instead of letting it standing on the table makes a big difference.

[@nothnx3210]

Thank you for this comment bc i might've not known this if I purchased this mic today 🥴🥴🥴

[@tim_odonovan]

Awesome review, thank you! The sound quality of the Rode clinched it for me - just purchased!

[@tombuck]

It's definitely the best sounding USB mic I've used. Every time I use it it surprises me in a great way!

[@itsr7studio]

Thank you for such a thorough and insightful review of two great USB mics, Tom! Inspired by this video, I bought the profile earlier this month (it was on sale!) for work Zoom calls. After a week, I had to return it. The sound was not as rich and clear on my non sound treated home office as I had hoped it would be or would be similar to the rode mini I have been using for a few years. Just received the Rode NT1+ today, and immediately fell in love with the sound and the fact that it still retained that Rode richness and clarity despite being rather far from me so that it’s out of frame (thanks for being so precise, Tiny 2 Osbot!) when I’m on Zoom. For some reason, I don’t really notice the size of the Rode mic although it is noticeably larger than the profile. A great investment that I know I will use for years to come. Thanks for all your work, Tom! 🎉

[@tombuck]

I’m bummed to hear the Profile didn’t work out for you, but I’m so glad you found a mic you love! It really is a phenomenal sounding mic.

[@PradeepGovindaraju1]

I was looking for a comparison between Rode NT-USB+ and Sennheiser Profile. Only if the video title had mentioned this comparison, I could have jumped into your video much earlier and saved myself a lot of time. Will save some money as well, going ahead with the Profile. In Amazon India, NT-USB+ retails at US $ 225 and the Sennheiser Profile with boom arm retails at $ 150, the desk stand model sells at $ 90. Thanks for the great vid.

[@tombuck]

Thanks for the feedback- I changed the title so it’s more obvious that the video does include the Profile 👍

[@PradeepGovindaraju1]

@@tombuck Awesome. That will help more people like me 👍. Thanks.

[@CoffeeTalkandTechJohnRyan]

Tom I always feel like you are just showings us options that you enjoy and may be useful. That's what its all about thanks!

[@tombuck]

REALLY happy to hear that 🙏

[@timbonnarens]

The quality of your videos is insane.

[@normchristopherson5799]

Great review. On another topic, I was pleased to have your camera angles allow us to get a wide view of your studio. I am in the process of upgrading my own recording (podcast audio only) room to include video and am looking for ideas. BTW, I love Rode products. Absolutely love my Rodecaster pro mixer and Rode wireless microphones.

[@hackinghifi4247]

He has videos on his setup they’re great I’d check them out.

[@the.i.p.address]

Had the original. Outstanding mic. Recorded a lot of hours of teaching material. The stand is actually perfect. I would mount it in a horizontal orientation to keep it out of camera and it picked up just fine. Great video once again.

[@tombuck]

Horizontal is definitely a smart way to go. 👍

[@PrestonJensen]

I’m still enjoying your original mic recommendation of the rode PodMic but I still enjoy watching all of the reviews of the great new mics coming out!

[@tombuck]

There are so many great ones out there!

[@imr4nkhan]

Hey Tom, what a cool video and definitely your video is way above other product reviews. Appreciate your efforts using the desk stand and boom arm. Definitely high quality advice. Thanks a lot👊🏻

[@tombuck]

Thank you! I really appreciate the kind words!

[@Magic_dawn]

Not being able to say covid cuz you could get demonetized is both scary and hilarious. Its a great time to be alive.

[@JustGyan]

I am using rode nt usb+ with all the settings (like HPF, Noise Gate, Compressor, Aural Exciter, Big bottom) on Rode Central app 'ON', and post recording I just amplify a little bit and apply hard limit. On mobile devices my voice is fine, but on android TV devices I hear a lot of bass. Why is that and how to avoid it. I want the same quality on mobile and TV devices. Please help, thanks in advance,

[@tombuck]

Hmm, it seems like the Android system must have its own audio processing. If it sounds normal everywhere else, then that should narrow it down to the Android.

[@imclueless9875]

Still using the Original version of the Rode NT-USB. Almost 6 years later it is still the best mic i have tried, WOULD HIGHLY recommend to anyone who doesnt want to spend CRAZY high amounts on a microphone and Rode's support has been absolutely AMAZING. Twice my mounting ring has broken and both time they sent me a new mounting ring completely free.

[@JakeSkillman]

I'm actually getting rid of my NT USB. I have a pretty deep voice with some nasal aspects and the darker and more crunched tone of the NT USB just doesn't allow my voice to really cut through other audio.

[@normchristopherson5799]

I just added this microphone to my collection thanks to Tom. Rode products are wonderful!

[@tombuck]

Glad you're enjoying the mic!

[@andy.cher404]

30 secs into video and I am already hooked with the NT-earely pun. LOL I'm gonna dig in into channel archive :) Edit: one thing that you forgot to mention is application: if you plan to play guitar and record it you probably better off with the mic that has stereo pattern. Those 2 mikes just do Cardioid Polar Pattern hence probably the price. Throw in 2 or 4 patterns and mic goes over into 170+ area :(

[@ivanremus1]

I own more than 40 different Rode and Sennheiser microphones. The original NT-USB is so good that I use it as my primary microphone, always connected to my computer. @Tom, the connector used in the original NT-USB is a USB type B.

[@tombuck]

Thanks for that info! It’s pretty wild how great both versions of this mic sound.

[@maxbas2018]

While probably unintentional, but you turning around the mic at like 2:08 was such a good deal for me! I'm currently looking for a usb mic that I can use with a speaker setup which is how I came interested in the nt-usb. Actually hearing the difference between front and back was insanely valuable to me therefore.

[@tombuck]

Really happy to hear that! I was just using this mic again today after not using it for a while, and dang, it just sounds SO GOOD! I hope you find a mic you enjoy!

[@maxbas2018]

@@tombuck i decided on the Sennheiser one now, as I as a newbie didn't hear any difference. Also the cheaper price and the, as you mentioned, gain control were pros. It's going to arrive tomorrow, I'm excited :D

[@1000sabor]

Thanks for this super open mics comparaison, the Sennheiser has a metallic tone...

[@rickardbengtsson]

Recently came across your channel - big fan!

[@tombuck]

Welcome aboard!

[@Sowah023]

Hey Tom, I just received my Røde NT 1 5TH Gen. using it on the RCP2 is awesome. Very lightweight compared to my old Trust AKG P220. The noise flow is really low and it’s buttery smooth with my voice

[@tombuck]

I've heard nothing but good things about that mic!

[@Sowah023]

@@tombuck you can alway borrow my mic to make your video if Rode doesn’t send you one so you can “hit the Røde”

[@jayaben2412]

I just bought the NT1 5th gen, and it does sound great in XLR mode. I'm still trying to figure out how to get zero latency monitoring in USB mode, with or without Rode's own software. If you've had success with that, please share!! 💐

[@frosty6845]

They do sound different but I think they sound similar enough that I don't think you could go wrong with either and the average listener wouldn't notice. I suppose the deciding factors would be if you want the included pop filter of the rode or the good rejection of handling noise of the Sennheiser.

[@tombuck]

Yep, the. end result is great either way so it really comes down to usability and which fits better into a workflow.

[@DefCantGame]

I enjoyed my NT-USB since 2007 and had given it to my mom after i bought the re20, definitely a solid mic

[@DefCantGame]

as for the original NT-USB believe its a USB 2.0 A/B cable connector (same as what you'd plug into a printer)

[@tombuck]

I had no idea it’s been around that long! That’s pre-Yeti! 🤯

[@DefCantGame]

@@tombuck Yeah I cant remember the exact date of the release and everything i look at references the refreshed version and the latest one but they had a few around 2007-2010 that came out. remember getting it for christmas from my mom to do voice overs and now shes the one using it lol

[@ac1320]

I thought this was the NT 1 5th gen video we want. Instead it was the NT USB + video we need. NT-ways, continue your work dark knight.

[@tombuck]

Just as long as I don't see myself become the villain 👀

[@TheMrCull]

No gain knob can actually be a god send for musicians. Especially when doing a bunch of takes and overdubs. Accidentally hitting or adjusting the gain knob between takes is a mixing disaster. I love having digital gain controls because no one plays with them

[@1wJan]

Thank you, you made me choose the profile. Mainly want one for teams calls. Sounds silly, but as a consultant that is in meetings all day I have noticed that a good camera and mice do make you come across as more professional. The two main selling points for me are. It rejected the traveling sound like if I type on the keyboard while talking. And most important. No app needed. My current assignment is in a bank and ohh boy is my computer locked down. I can't even install the app to get the most out of my Logitech keyboard or mouse. And we are not allowed/able to use industry standard programs like resharper or postman due to security concerns. So the fact that this doesn't need an app is really a killer feature. Thank you.

[@martinXY]

0:13 The biggest lie in this video is that you are not sorry at all. I've had a Rode NT-USB for several years now (with the PSA-1 boom arm, those little stands are cr4p) and it has been amazing. Makes me sound good. Not smart, but good.

[@ShardCollector]

Hearing them side by side, the Rode sounds more "open" and natural. But compared to my current wireless headset, either would be a huge improvement 😅

[@markwiemels]

Wow, this sounds phenomenal! Great video, as always.

[@tombuck]

Thank you! It's a really awesome sounding mic.

[@JustGyan]

Should I disable windows default Audio Enhancements during voice over? I am using Nt usb+.

[@tombuck]

I would say yes. I always think that those kinds of enhancements are designed for people using a low quality or built in mic in a noisy environment. If you're using a good mic in a semi-sound treated space, you'll likely get better results without the enhancements.

[@BaxTechYT]

So wild to think back to the Blue Yeti days and see how far USB mics have come

[@tombuck]

There are legitimately good choices now! Not just "good for a USB mic" good, but like, good good.

[@Saphris]

I'm on this video looking to replace my blue yeti lol

[@radioprobromania]

Hello Tom, can you help me choose a good mic for my radio station please ? Now i use Neumann BCM 104 with RDP2. Thanks 🙏🏻

[@Bezark]

Really looking forward to hearing your review of the RODE NT-1 5th generation. Would love to see a comparison between these two mics.

[@tombuck]

Can't wait until I get mine!

[@augustoliver2779]

I'm glad to hear that you've recovered from COVID. My sincerest condolences for your diagnosis. I too have received five COVID vaccine shots and am grateful to have remained healthy. I am planning to get my second bivalent booster shot six months after my first booster shot for added protection. Wishing you all the best.

[@tombuck]

Thank you! It hit me pretty hard, but I think it would've been a lot worse without the boosters and stuff. But I made it 2.5 years!

[@danny_jose]

I came here to watch the review but this comment is about your studio. Your studio and light setup is so cool Tom.

[@Thesenshin7]

ive only bought three mics in my life and they were all reviewed by this man and was one of the reasons i got convinced, (great NT jokes btw)

[@tombuck]

Woah, this is a huge compliment! I hope you like the mics!

[@RaphaelMnt]

Thank you so much for this review! Really helped me make a choice

[@tombuck]

I’m so happy to hear that! Hope you get something that works great for you.

[@ranjantechnocrat]

I am using USB NT for last 3 years. I love singing Karaoke especially the feed back. It started giving some issues with feedback for last 2 days. I ordered a new one today.

[@eduardo.enrique]

Great video 👍 excuse me which is better the rode nt usb+ or the akg lyra? Thanks 🙌

[@tombuck]

I haven't used the Lyra, so I can't say for sure. I've definitely liked the AKG mics I have used in the past though. I just really love the overall sound of the Rode.

[@jamesrice8170]

Hey Tom, Another great review! I'm extremely excited to hear more from and about the profile. When is it scheduled to drop? Sennheiser still says coming soon on their page. Still working on my puns...

[@JMMinistries]

Please Try To Connect The Rode NT-USB+ Into Any Of The USB-C Ports On The Rode Procaster 2 To See What Happens & If You Can Get It To Work As Well! That Would Be Kool 🔥

[@tombuck]

Right now there's no functionality there, but man that really would be cool! I feel like it could be possible through a firmware update, so I'll keep my fingers crossed for it at some point!

[@experimentalcyborg]

Thanks for the review, and especially the comparison! The Rode sounds way, waaaaay better to me, so i'll deal with the missing knob. 👍

[@tombuck]

Glad it helped! The Rode is an excellent sounding mic!

[@l8farl561]

yay finally been waiting!

[@samfraulino]

Love the Rode NT-USB Mic, wish the stand was a bit higher, I put mine on a Rode DS1 stand and it rocks! A tad tall, but better than too short for most uses.

[@exposurebar-andrewhoyle]

I need to get together with you and figure out a good mic for me to use. MV7 is ok, but I kind of want to explore the world of condenser mics, just don't know where a good place to start would be. Great video once again Tom, always fun watching, learning, and exploring.

[@HolaMundoDev]

Hi Tom! your videos are in 4k, but I suspect that you use an atem mini pro iso to record your videos, are you scaling them up? thanks!

[@tombuck]

I record everything internally to the cameras' cards so that it can be true 4K. The ATEM is wonderful, but I mainly only use it for streaming since it's limited to 1080. Up until May 2021 I was upscaling 1080 footage form my EOS R to 4K and it honestly looked pretty good!

[@petrasvilkas]

The Sennheiser is such a sweet and pretty package, but the Rode does sound a bit better in my headphones. I doubt any normy will notice the sound difference, and the slim size of the Sennheiser will be much less obtrusive on video.

[@tombuck]

Yeah, I prefer the sound of the Rode too, but if I were in a pinch and looking for a "complete package" that required no extra fiddling, I think I'd still lean towards the Sennheiser.

[@dsaltz]

While it defies logic that manufacturers keep selling mics with stumpy little stands, just buy a Shure A26X 3" Extension Tube for Desk Stands for 9 bucks (not Tom Bucks). Problem solved. BTW, If you need more height, the extensions can screw together to get to 6 or 9 inches.

[@tombuck]

I have several of those extensions- didn’t even occur to me to put one on the stand 🤦🏻‍♂️

[@bluebooper]

Excellent review, thanks!

[@bigtvlogs7630]

Ordered the rode! Imo the profile sounds a little nasally and that rode is crisp and deep. Thanks for the reviews/comparison!!

[@tombuck]

Glad you found the one you like! The Rode has a really terrific sound.

[@atrium12]

New to this channel and I must say whatever camera you’re using, color grading you’re doing or lighting you’re using… my goodness man this video is HD

[@tombuck]

Thank you! I use the Sony FX3 with just a little bit of color adjusting in Final Cut. 👍

[@JasonOJX]

Another great review!!

[@tombuck]

Glad you liked it!

[@frankpatterson9682]

Sounds crispy! Solid review 😁👍

[@exicmc]

Which one would you prefer getting: • Senheisser Profile usb mic • NT usb mini • NT usb+? I'm planning to buy a usb for myself that I would use for a long time doing different types of applications more like zoom meetings and recordings.

[@tombuck]

For PURELY sound quality, I would choose the NT-USB+, but for ease of use and overall simplicity, I would choose the Profile (which should be available VERY soon...)

[@TechTroublemaker]

Great video. This is useful as I am often asked what is a good USB mic to use for X, whatever X is for that person. I love my MV7 but at times the software is wonky so physical controls are truth. I often recommend the Samson Q2U but for 2X the cost... this one is a good choice.

[@tombuck]

The Q2u is an easy recommendation because of the price. It’s a great one! But the sound quality of the Rode is really phenomenal.

[@bergerbot]

Hey! I love this video and the other one you made about the Profile mic - but I reeeeally want to know what lime green cable this is because it's awesome. I didn't see it listen with the headphones

[@CMMedia692]

Yaaasss!! I can't wait get my own

[@HalloChristian]

Hi Tom, it would be great if you could test the new Rode NT1 5th Gen. Thanks for your great reviews! Keep up the good work. 😀

[@Lilwock__]

I'm asking for artists is this good for vocals Nd stuff???

[@tomrakete7411]

Thank you very much Tom for this informative and fun video! The asthetics of your studio are so great as well! Well done! :) Quick question: I want to get a mic for voice over jobs I record at home. From looking at your video I personally like the rode sound better and the sennheiser sounds a tiny bit mechanical. Thats why I would lean towards the rode. But do you think the rode is too bass heavy for such jobs where the sound should be more or less neutral?

[@zozilla274]

Thank you for the great comparison. Could you also compare these two with Elgato Wave 3? I am going to get one of these three soon, but cannot decide.

[@eecorr]

For me both are great but the røde has more bass and sounds more direct and natural. As you said the sennheiser is more for the beginner. Both mics are great but sound wise the røde is more my choice.

[@tombuck]

The Rode has a great sound quality! Just wish there was a physical gain dial on there 😑

[@ItsRyukin]

The only good thing about the boom armed mic is they were going to be out of the frame while recording a video, Which is what I really like to do. 😊 Or if I want the mic into the frame, Yeah. I can do that. There are so many ways to setup a microphone, Which is depends on what you've planned to setup for. 😁

[@chalo2876]

Tnks help me a lot, tons of information I appreciate

[@tombuck]

Happy to help!

[@JustGyan]

What is best gain level on the nt usb plus for high quality output?

[@tombuck]

It depends on quote a few factors. I typically set the computer's gain quite high (if not at 100%) and then adjust in my recording software.

[@iosdeals]

I more or less randomly picked up the Hyperx Quadcast S year or two ago, which at that time wasn't that much cheaper than this one, and I am rather satisfied with it, but for my use - audio/video conferencing, I really don't need to touch any settings, ever. I set the gain once and forget it - however, with that mic, the gain wheel at the bottom (or on top, with how I mounted it on an arm), I constantly mess with it when I reposition my mic and forget I should grab it from the top. I do use the mute on that, and I use the LED to turn from off to solid red when it's muted, but I also started using Stream Deck recently and control my mute from that solely. As I need a mic for my 2nd work desk, I will be picking up this Rode NT-USB+, because I don't see much of a gain (ehm) going for XLR and dedicated interface for that, and for my use, this one hits all the marks. But I can imagine for people doing actual recording/streaming, the missing gain control would be a problem (although it's still just USB mic, so could be even more convenient to map it to your mouse with something like logitech logi+ mouse selection or any other 3rd party utility. Or a stream deck type of action buttons.

[@cashmoney2159]

I just need 2 mics for a podcast so I'll buy both of em so can you please tell me how to record both mic's audio at the same time for a podcast?

[@RonaldPostelmans]

Nice video. After this one. i relalized that it's also really smart picking a mic that has all the needed buttons on the mic itself. Are also good combo mics USB and XLR that have all the needed buttons on the mic like the senheiser profile? Can you mount a senheiser profile on a for example Elgato Wave mic arm?

[@tombuck]

The Profile will mount to any arm/stand, so no worries there. It just doesn't have XLR. But it IS the mic I travel with since it's so small, sounds good, and needs absolutely nothing else to get up and running.

[@Genera1B1um]

Great job as always. I am using it to podcast on the go. Did u find any good traveling pouch or foldable stand?

[@tombuck]

So far, I haven't found any really good cases, but some of those ones with "pick & pluck" foam might be good. I think Amazon and Harbor Freight have some really inexpensive ones.

[@EmadAbbas89]

it has zero effect on the output.. this is the best sentence no reviewer said but you. thank you

[@tombuck]

I'm happy it was helpful!

[@michealpbeast2583]

You make this mic sounds good. Would it be a good/great investment for voiceovers or podcasting? I know these two positions are total different and you would need different equipment for each. But would this mic be good for which one?

[@tombuck]

I've used it for both and really love it! Mics always depend on your specific voice of course but it seems like this one makes everyone sound good 😁

[@soggycerealz]

This was an amazing video, I was wondering between the sennheiser vs Rode NT-USB+ vs the new AT2020 USB-X. Now I'm just wondering between the Rode NT-USB+ vs the new AT2020 USB-X, thanks!

[@tombuck]

Glad I could help narrow things down a bit! You can't go wrong with either of those options 👍

[@AlexGTech]

there *aiN’T* nothing like a decent microphone review like this one. Okay that didn’t work. I love coffee. NT.

[@NSW_XUZIA]

I see what you did there 🤣🤣

[@tombuck]

I think it worked great! Wordplay isN’T for the faiNT of heart.

[@NSW_XUZIA]

@@tombuck hahahahaha

[@TheBabbelNet]

Hey Tom! First of all thank you very much for your review and your work here in general. After using the original Blue Yeti for almost 12 years it's really time for a change for my 16th podcast year and I really can't decide between the Sennheise Profile and the Rode NT-USB(+). Both really sound like the next step I want to make regarding my setup upgrade. That's why I would like to ask you how both handle background noise? Unfortunately every room here is pretty noisy and even with a bit of work there are a few sounds I still have to live with in my recordings. You already said in one of your videos that there's no mic that doesn't pick up background in some way, but perhaps one of the two does it better than the other? :D Greetings from Germany, all the best, thanks in advance and have an awesome weekend!

[@Acoustic-Rabbit-Hole]

The Rode definitely sounds better for spoken-word, but the Sennheiser is prettier, and it's also plug-n-play. No software needed. And it has gain button and mute. And great sound isolation. Yet, I would only use the Sennheiser Profile if someone gave it to me for free. And even though the Rode sounds excellent for podcast, and probably not bad on guitar or other instrument, I won't use it (even if someone gave it to me for free,) because it would look ugly in my studio decour.

[@lucas_92]

I keep coming back to this review, Tom! I'm hesitant about getting it since I've mastered the processing on my humble Blue Yeti nano. Curious to hear about your experience with the Rode Connect app and the Noise gate function. Have you been able to work with it to ensure there's no background noise?

[@tombuck]

I honestly should’ve gone into the apps more here. They’re super powerful, and if you’re already used to EQ’ing with software, it’s essentially like having a virtual Rodecaster for the mic. 😎 That being said, if the Yeti is doing what you like, then maybe it’s worth sticking with!

[@lucas_92]

@@tombuck thank you!

[@theflippestside]

just ordered this and a foldable keyboard to demo songs with while traveling. will be easier than carrying around my interface + XLR cables and some sort of travel mic stand? lol and my thinking is that if you can produce a good recording with cheaper gear, you'll. I think the challenge will only improve my tracking/editing/mixing...especially on the EQ front. Nice video, thanks!

[@abelade]

Thanks for this video Tom! Would you mind elaborating on what settings to use in rode central (like you mentioned at the end of the video) to make the USB + sound good/better? For context I’ll be using this to record vocals for my music. Thanks again!

[@frjohnafendoulis4701]

Hi Tom. Can the microphone be mounted on another mic stand? Thanks for all your work!

[@DefCantGame]

Seeing as its built the same as the original the piece that screws into the boom arm has an adapter in it that you can adjust depending on the stand mount size so yes it can, does get annoying if you want to take it off and on cause you have to screw that whole piece with the knob on and off

[@tombuck]

Yep, it’s got a standard 5/8” mount 👍

[@youssefzaghloul3068]

Hello Tom, I bought the Rode NT USB+ after previously owning the Rode NT USB mini, i am very happy with the quality of the USB+ but I'm facing an issue that I am wondering if you experienced reviewing the mic, hearing my voice in a recording or a third party monitoring software sounds great and fine, but hearing my voice using the phsycial zero latency port sounds very nasally, even tho while connected to the same port my voice sounds fine in recordings, it's only so nasally with the zero latency monitoring, is that common? Did you have the same experience with your unit? Is my voice supposed to sound the same in recordings as in zero latency monitoring?

[@TheNewArtSchool]

Great video! The Rode nt usb+ needs to be compared to the rode nt usb mini or the rode XCM-50 kind of the usb mini successor . I personally have the nt usb mini and use it as an everyday mic and its a brilliant starting mic. Also the rode nt usb mini has a physical mute button.

[@artn1929]

Whats ur voice presets or in what programm u make so great voice...its so amazing. Maybe u make video to config microphone to have voice like u P.s: my choice is road nt+. Thx

[@tombuck]

Thank you! I honestly don't do much in terms of processing. With USB mics I usually record into either Quicktime or Adobe Audtiion and then add a little bit of Voice Isolation in Final Cut Pro (roughly 20%). With XLR mics running through the Rodecaster, I typically stick with the presets because I think Rode did a great job on them.

[@stevenwyatt4632]

I have a MacBook Pro and a complete novice when it comes to microphones and technology (and your content has been a great help, Tom). I'm looking for a decent USB mic for online meetings (Zoom, MS Teams). Although I prefer the sound of the Rode, I'm thinking for my use case, the Sennheiser is a better option with the physical controls and noise rejection. Can I ask a gain settings question, please? Does the physical gain control directly affect the software gain control in MacOS, or would you set the software gain to max and adjust via the mic control? Or something else? Thanks.

[@aprilalvarez5706]

So helpful!

[@markexploringnewstuff]

Green headphone cable! What is going on? Lol. Enjoyed your comments on the NT-USB+, I have the older model which has a USB B connector on the mic. USB C is definitely an improvement. I agree about the “missing’ gain control.

[@tombuck]

I ran over the blue one with my chair one too many times 👀

[@sglatitude]

Would you be able to make video review comparison between Rode NT-USB+ and Shure MV7? Thanks

[@tombuck]

I do have an MV7 review! kzbin.info/www/bejne/Y6qZg4p4dp6nes0 So while they're not in the same video, you can get a sense for how they sound on the same voice in the same environment.

[@diamonddogz389]

Tom! Thank you for your thoughts and review. I'm having a hard time to choose between the Sennheiser Profile and Rode NT-USB+. Both of those mics sounds good to me. I want to use the mic to record (short) guitar videos. So, a mic for my amp. What would you recommend? And also...which mic doesn't include a cable to connect to a smartphone? I'm using a iPhone. Thanks.

[@homestudioacademy]

Hey Tom, have you tried the NT1 5th Gen? It now has USBC connection and it never clips. I think it’s going to be a great mic for many people getting started recording audio.

[@bigbigplanet]

It can still clip for livestreaming but yes, for recording, you get a 32-bit float file to work with which is super nice. I'm also looking forward to Tom's review. :)

[@runeatexplorer7796]

Just got the profile. It works with my android phone (but it’s for business) but not on my iphone 11 (usb-c to lightning). Any expert here who can tell me why?

[@tombuck]

It likely depends on the cable- it needs to be "MFI Certified" (it's one of those Apple things...).

[@techmed-rainer]

Thank you Tom for another great video. I think this might be the first time I disagree with you, Tom. With your voice I liked the Sennheiser more than the Røde. And it's amazing how Sennheiser made it so simple. Usually they tend ti do the opposite.

[@tombuck]

I will not argue with you preferring the Sennheiser- I LOVE that mic!

[@kacsoac]

good analysis, man

[@StrangelyDigital]

Hello. I understand that it comes with an USB-C to USB-C cable. Can it be used with an USB-C to USB-A cable?

[@tombuck]

Yep!

[@StrangelyDigital]

Thank you!

[@scottelliott90]

Are you able to record audio and film directly on an iPhone with this mic?

[@tombuck]

Yes, as long as you have a USB C adapter or a cable like Rode’s SC19

[@organicphoto]

Is this a good option for someone who wants a simple setup for recording vocals into an iPad and for having Zoom karaoke parties with friends?