How to roll a burr/hook on your scrapers with SCREWDRIVER

[@jackthompson5092]

Thanks for the lesson Tomislav.

[@tomislavtomasicwoodturning]

No problem ☺️

[@stevenhansen8641]

🕶Thanks for the time and effort Tomislav. I really appreciate these short tips videos. But my favorite is the 4 ways videos with Richard,Sam,and Mike. Thanks again.

[@tomislavtomasicwoodturning]

We all love those🤗

[@johnnyb95678]

I really appreciate you taking the time to show us new techniques. Thank you.

[@tomislavtomasicwoodturning]

Thank you

[@pjseiber2774]

Thanks for sharing ❤

[@tomislavtomasicwoodturning]

Thank You for watching

[@Spirt_Turnings]

Nice Tomislav.

[@tomislavtomasicwoodturning]

Thanks

[@tomcoker9882]

Thanks Tomislav for another informative video. My scrappers came with a 55° bevel. I’ve been rolling a bevel with a burnisher, but only with a few strokes from the bottom just off the bevel angle. May try your method. BTW; what grit is the diamond hone you use. Do you use it on the top to remove the old bur before creating the new one? Thanks in advance and again for the videos. Cheers, Tom

[@tomislavtomasicwoodturning]

Hi Tom, how are you sir? Hone is quite fine, about 800grit, after I use scraper from the grinder,and its getting dull, I hone the top first then with honing the bevel you raised a new burr... when I use screwdriver then I don't hone the bevel as you need sharp edge to get nice sharp burr....hope that makes sense 😀 I'll do more on that soon

[@_Egor_Egorov_]

Please tell me the angle of sharpening the scraper for bowls 6:18

[@tomislavtomasicwoodturning]

Most of my scrapers are 45 at the nose

[@_Egor_Egorov_]

​@@tomislavtomasicwoodturning Thanks for the reply. I took a screenshot of your scraper and determined the angle in the CorelDRAW program. The angle was 45 degrees.

[@tomislavtomasicwoodturning]

@@_Egor_Egorov_ uuu thanks, I'm proud of my self sinse I don't measure it but do it by eye😉

[@_Egor_Egorov_]

@@tomislavtomasicwoodturning I have a grinding machine like you have a Record Power RSBG8. I sharpen exactly, I made a device for sharpening. Good incisors are expensive here. I'm saving them.