WHATS INSIDE A GAS HOB, gas tutorial on what you will find inside a gas hob and see how it works

Derek shows us inside a gas hob and explains what you will find and how it works. This is a gas tutorial for trainee gas engineers and remember you must be gas safe registered to work on gas.

[@raul835]

Really appreciate these vids.. I've only qualified mid-January and all this helps to consolidate the learning/training we go through on MLP's and shows some things we weren't shown. Excellent.

[@brendanconnolly8341]

That's a genuinely great video. Your videos where you get stuck in to actual appliances are brilliant. Thanks for putting in the time Derek

[@user-un2lf2fz4j]

I am from 🇮🇳India best vidio

[@yasinhussain8723]

Excellent explanation on this gas hob very impressed on the way you have explained it I love all the videos that I have watched so far I am a new trainee keep it up please.

[@hdhanji8006]

Great tip on cleaning the injectors. Equally useful for injectors on boilers. Thanks Derek

[@mpalaskokkalis1476]

Με 1 ψυλη καρφίτσα καθαρίζονται τα μπεκ υγραερίου χωρίς λύσιμο βάζεις την καρφίτσα στην τρύπα του μπεκ και ανοίγεις το διακοπτη και ότι τριμουλιδια είναι με την πίεση του υγραερίου θα φύγουν έτσι κάνουμε και εμείς στην μικτή κουζίνα υγραερίου όταν βουλώσει κανένα μπεκ απ τα μάτια υγραερίου τα ξεβουλωνουμε με καρφίτσα ψυλη μετά λειτουργούν οι φιάλες προπανιου βουτανιου ρολόι

[@BetaboyBuffet]

Thank you very much for sharing this info. The injector was clogged and I cleaned it the way you described it and ‘presto’ !

[@antonybuckley2645]

Another brilliant video Derek. Was never shown inside an hob on any of my training

[@kimm1910]

This was very informative video. You covered thoroughly for every parts of the gas cook top. Thank you

[@aryan6536]

Thank you very much, I used your technique to clean the injector! for years my wife has been eating my head about getting it fixed. I thought it might have been easier to change my wife than the hob but thanks to you, I was wrong. Now I need a story to tell her, it was very difficult dearest, It took me all day.

[@tomkatgastraining]

Good luck with that 😂

[@HighHolyOne]

Appreciate the in-depth education in this video. Thanks!

[@oneloveonelifeman]

Thanks for the video. Looking forward to getting back in the center soon!

[@MrVipulLal]

Comprehensive tutorial. Much appreciated. Thanks

[@dublinplumbing9758]

fair play to taking the time to publish these videos only staring out in the industry and these videos are very informative & Helpful

[@Metaish101]

Awesome video. You just saved me an expensive repair call-out/replacement hob.

[@arianxhebraj6107]

simply the BEST...wish one day i can be like you. Thank you Derek

[@tomkatgastraining]

ARIAN XHEBRAJ you will mate it’s just time and practice 👍🏻 it all comes with old age

[@jimknox8345]

Nice one Derek very informative just what I needed to know

[@piotrmarchwacki3414]

Very useful video. Thanks Derek 😃👍

[@dannyjenko696]

Excellent video, what a good way to clean the injectors 👍

[@willlomas2725]

Thanks Derek ...more than you realize going on inside hobs!.

[@brendanmoran9516]

Great video Derek. 👍

[@mj0n4id36]

Cool video. One of the burners on my hob doesn’t spark. This video has nicely explained the reason and has given me a good understanding. Thanks Derek 👍🏻Really useful. Keep them coming. I’m catching up 🤓 Asian Jon. Training.

[@Liveyourlifewithafatcigar]

Very Informative...Many thanks Derek

[@hakimnaamany1366]

Nice video-Well done-More to be explained on the requirement of thermocouples due to safety features

[@swethabaruah3280]

This is an extremely helpful video! Thank you so much!

[@michaelrose5040]

Great video. Cheers Derek

[@davidc_5]

Great in depth video, thanks for sharing your knowledge

[@alittax]

You're an excellent teacher, thank you!

[@luisvalmoreurbinapita3192]

Thank you! This has been helpful for my studies!

[@rammangrolia379]

Excellent demo. Thanks

[@rodwynrhind5573]

Thank you mate. Very informative!

[@Saaga2727]

Great explanatory video. Very nice 👍

[@naturelover_9211]

Nice video as always it's very helpful thank you.

[@stevereynolds7375]

Great video as always 👍

[@timmyshah6450]

Brilliant video always helpful

[@mxhammed]

Thank you. Very informative.

[@zaperfan]

Great instructional video, thanks for posting

[@ianbrown4939]

great video derek thanks

[@markalmeida3816]

Excellent video!!! Thank you!!!

[@rumanuddin2282]

Love your vids keep them coming

[@leonardbalint4930]

thank you Derek, perfect video

[@top-hittv316]

Nice and informative

[@jamesmcgilvray6363]

Brilliant video well Explained

[@qhero4503]

Brilliant video thank you

[@josevilca6493]

thanks very much the video is nice and very well you explanation how to cleaning and how to need to fix it .

[@michaelrose7258]

Awesome as always

[@wokeupandsmellthecoffee214]

Excellent tutorial you sure know your stuff. I wish you were my neighbour, I need my gas hob looking at !

[@tomkatgastraining]

🤣🤣🤣👍🏻

[@jfarinacci0329]

Really good vid. Thank you.

[@chrisjones4500]

Thanks Derek..

[@binagarten4667]

excellent indepth knowledge

[@apurvbose]

Thank you so much.

[@rayl1977]

Great job… thank you..

[@faridratni6799]

This is excellent video

[@Ed-fp9rx]

Great video

[@christlikekemar2489]

Great job

[@rivkiroyde4362]

Thanks Derek. Benny

[@p.l.pradeepkrishanthadesil9785]

Thanh you very much. very clear explain

[@riveness]

Thanks. Bought a house with a diplomat gas hob and was getting a small amount of yellow intermittent licks in flame (never had gas) but apart from cleaning the top distributors, I didn't want to take top off (call in gas engineer obvs). No need after seeing this.

[@bashirbutt1456]

Thanks young man

[@darrenrobson2486]

Excellent video. Any tips for an ignitor that clicks and sometimes lights (1 in 100) even after I've cleaned and checked everything on your video and others? Is it a duff ignitor control thing? The oven is a Canon Chichester and is about 15 years old but in great condition otherwise.

[@ashfaqhussain1636]

Very good video

[@peterruckdeschel4468]

Well explaned

[@ralphhardie7492]

Brilliant thanks 😌

[@sailajarani4114]

Fantastic tutorial...it would be great if you could mention/ spell out the components and their price too

[@Elysianplains]

Excellent

[@3214569544]

Brilliant.

[@NordicExchangeTrading]

What is an injector? An injector is an electromechanical system in a car that is involved in the formation of air/fuel mixture. This term refers to a fuel injector that injects fuel, but also refers to a fuel system with multiple atomizers. The injector works on all types of fuel, thanks to which it is used on diesel, gasoline and gasoline engines. In the case of gasoline and gas equipment, the fuel system will be identical (thanks to this, it is possible to install LPG equipment on them to combine air and gas). The principle for gas stoves is the injector, an air feed to get the right flame identical, only it works under a certain pressure that is mixed with the gas.

[@ikennaenebe7776]

Top man. 👍🏾

[@JohnSalmon]

2:52 Surprised to see that top right gas pipe squeezed on the bend. Is that a method of restricting the gas flow to that particular burner?

[@davidproctor6359]

thanks, as i always replace faulty hobs, nice to know how 2 fix lol especially if quicker

[@izzilad]

brilliant!

[@craigrfoley]

I have actually so this is appreciated

[@Kris_Angelo]

Thanks so much. Any idea what can block the gas if i have already cleaned the hole?

[@supermick83]

Great video. I have bought an old mobile home which I've moved into. I tested the gas water heater which was only tested a few months ago and that works fine. The problem is with the gas cooker. I turned one of the knobs and the gas started coming out but when I turned the knob back to off position, the gas kept coming out. I had to run out and turn off the valve on the propane tank and haven't touched it since after. After looking at your video, would I be correct in saying that the graphite grease may completely dry and preventing the valve from shutting off or am I barking up the wrong tree? I have asked 4 local registered gas installers to have a look but they said it'll be months before they get a chance to call out. I am badly in need of the cooker. Thanks I appreciate your feedback and loved the video. Great detail 👍

[@sheilatrant-mccarthy2727]

does a new gas hob have to be hard wired or can the ignition be put on a plug?, been watching a few of your videos as i need a new one, i found the videos interesting though i dont meddle with gas just like knowing how my stuff works.

[@mark.e.p]

This is exactly what I am looking for. I have a problem with the ignition, sometimes it's on permanently and sometimes it doesn't come on at all? Each of the gas knobs has it's own spark I don't have one common one.

[@Bradwellify]

Thomas Bradwell Thanks Derek

[@udghkimnbvc]

Great video! I have a question. I was recently melting chocolate for a cake, and spilt it over a burner, and now set chocolate has stopped gas coming through the injector. Can i get hot water and a toothbrush to clean this without taking it apart? Again great vid, thanks!

[@hamzagurman2046]

Thanks.

[@paulrossiter9567]

Brilliant video....just wondering if the gas tap was letting by and readings were found at the burner with with knob in the off position....would greasing the barrel with graphite grease cure this problem also along with making it easier to turn if stiff. Thanks in advance 👏👏👏 Lovin your vids 😄

[@tomkatgastraining]

paul rossiter it’s the first thing you would do to try and resolve the issue. 👍🏻

[@user-eh3sn4kv1m]

Brilliant

[@Gr8Believer]

Great vid. Learned a lot. Mine doesnt connect to power to generate a spark. There must be a battery that can be replaced?

[@ek6868]

Tanx for the upload good informative video plz can you do some boiler fault finding videos👍

[@tomkatgastraining]

E K I do the inside a boiler case videos that covers the boiler faults 👍🏻

[@ek6868]

@@tomkatgastraining tanx appreciate the content👍👌

[@Vivek-iz2hy]

Grate job

[@Gr8Believer]

I'm following your procedure, at 11:38 when you removed the 2 screws for the valve switch it looks like there's space for an O ring. Mine didnt have O rings, did yours have?

[@noelmoore4474]

AS one of my students used to say - "It's volts that jolts but mills that kills"!

[@tommyblackman7119]

Thumbs up and no non constructive comments

[@TaleswithMariyam]

Useful

[@jakwalker7948]

Can an electrician/competent person work on the hob if not touching anything to do with the gas?

[@neerajshrivastava5867]

Thanks for nice information 🙏 Pl. Guide how to increase flam to it's full? Thanks in advance 🙏

[@v10blogs95]

Hi I’ve got an issue with my Gas Hob, when cleaning it one day a lot of water got into the igniter switch and I believe that it shorted out so I’ve replaced the igniter switch, and I still don’t get any ignition spark. I haven’t been able to check the plug which may be a blown fuse but I don’t know where the power outlet is in my kitchen for the hob any ideas or suggestions?

[@rishikumar5097]

👍 Thanks,well explained, please advise How to adjust yellow flame to blue

[@tomkatgastraining]

Get it serviced by a qualified gas safe registered engineer

[@BlackMambaKO]

I have beki hiz 64120 sx and i took all the bolts and nut off and the upper part doesn't want to lift up. What do i need to take off to get it off?

[@ilexwang715]

Hi Derek, have you got any videos on Inbuilt fireplace liked this ? and installation as well? thanks

[@tomkatgastraining]

Yes just go to our channel and have a look

[@Mr4thetruth]

Brilliant video, thank you. How old was that first hob with no fsd or thermo couple safety device?

[@tomkatgastraining]

Graham M. Lawrence not sure it was one I took out and replaced

[@Mr4thetruth]

@@tomkatgastraining Thanks.

[@reegz942]

thanks m8

[@jimmalcolm2958]

What could cause small gas leak when the valve is turned off? only one out of four leaks and causes smell ( as detected by leakage detector).

[@jonathanfxjjonathanfx7223]

I love your training please be my mentor I want to learn more I will pay please

[@georgebuller1914]

10:37 - If I had a Quid for every carburettor jet I've cleaned out in a similar way..... :-) BUT, us 'ruffty-tuffty' vehicle mechanics used to SUCK the crap out of the jet (apparently, you get more 'ooomph' rather than blowing!) and then the job was a good 'un! No cans of 'namby-pamby' compressed air 'when I were a lad!' ;-) Of course, Petrol - the good old 4 star at least - is apt to taste better than stale cooking fat!... ;-)

[@MamoonBakeer]

I want to increase the gas flow rate of the 5th center "Wok" burner of a Bompani freestanding 5-burners model ? Can I drill the hole a bit larger and adjust the air intake accordingly?

[@tomkatgastraining]

No you definitely can not

[@dts9770]

👍 Dave Thompson.

[@abuwaleed1191]

Dear, Can you explain where is Air mixer in this Gas hob, as min is giving very high carbon, I could not find Air m mixer to adjust.

[@tomkatgastraining]

Yeh it’s called giving the hob a good clean. There is no adjustment just cleaning