Too Technical? E30 M3 Cluster Debug Fix and Rebuild!!

[@davej8746]

Very cool troubleshooting that e30 cluster...the fix was amazingly simple! Thanks for the vid!

[@amivanpoederooijeniglesias8720]

Thank you for this information! you are the good type KZbinr really helpful 🙏 maybe you can help brother.. I have a bmw E30 but I have swapped the engine to a Nissan SR20 DET and I need to feed a signal to my tachometer do you know from where I can get my signal connection? Is it from the coil signal wire or the injector pulse wire? I have no idea how to get a signal.. maybe both coil to pin 7 and injection pulse to pin 11? Please advise 🙏

[@adriansadler9459]

Do u have a video on the speedo calibration tool?

[@tommink2577]

Thanks for posting this. My cluster had an identical failure to yours - right illumination and left turn signal indicator!

[@autospeed]

Loving your intro! You're getting it super dialed in. Awesome video as well.

[@Garageaholic]

Thanks!! Not Too verbose on the intro u think?

[@christianyoung2917]

Same problem with my 89 325i. How did you find the break in the trace for the blinker?

[@we30touringcollection76]

Fast blinking means that one of the two bulbs on the turn lights is blown Just replace the bulb on the non working light

[@dariuspri]

Hey, that was actually really helpful. Trying to figure e28's dash that's missing some lights..

[@Garageaholic]

Hahahah glad to help!!

[@emilioguitart3754]

Really nice Job! How can i diagnose a faulty rpm gauge? Works only from time to time ...

[@Garageaholic]

I'd start by replacing just the gauge and see if it comes back. Trial and error is probably your best bet here!

[@emilioguitart3754]

Garageaholic going for it then

[@1188clean]

thats cool. i wonder my gas gauge never turns on when the fuel is low.

[@terrymarsh8094]

Thanks for sharing I’m enjoying your videos.

[@davidanaman3566]

Pls read the wire for the speedometer,mine isn’t working there’s a problem with the board

[@hugostiglitz7997]

Nice video. I learnt some stuff!

[@TheBlacSumrfs]

Man this is golden

[@franceleeparis37]

Would have been useful if you showed how to take out the cluster.. but this is great…

[@we30touringcollection76]

The 55lt tank has one sensor the 62lt tank has two so each one needs the appropriate gauge

[@2ndProtects1st]

Awesome

[@LoganSmith-jy7ii]

Literally exactly the problem im having with my cluster. Mines an 89 too, wonder why ours are failing the same way.

[@Garageaholic]

I think it’s because of the expansion and contraction do the heat. And I think generally the copper traces are just fragile

[@LoganSmith-jy7ii]

@@Garageaholic i was thinking about just sending it to bavarian restoration and be done with it

[@tw0million]

great videos. very helpful!

[@brians9292]

Awesome👍🏽

[@georgesantana7742]

can I ship my cluster to you ?

[@Garageaholic]

Hey George - Sorry not taking customer cluster jobs at the moment :)

[@driftboi3989]

You need to fix one thing... Please less talk in the intro 😂

[@Garageaholic]

Noted thank you for the feedback!!!