The Best Tool Pouch For Electricians And The Tools In It!

[@readabookg8502]

Feels good carrying nothing but a tape and marking tools

[@MORGANSMaintenance]

Appreciate it.. I’ve wondered about the Croc and the V cutter 👍👍

[@MattHmm-rq6dn]

I recently tapped a hole in a fujia stripper I have and it works well despite the diy. The one thing it dosent like is thick insulation like aluminum stove wire.

[@toolsandtactics]

@@MattHmm-rq6dn yeah, you have to follow the spiral of the nm cable as it turns i did it on 8-3 in a short and live

[@MattHmm-rq6dn]

I'll keep this in mind it was for 50amp stove plug in a 70s apartment aluminum stranded no neutral. It was too thick to cut it in the v. I doubt this wire is something they would use these days since it needs a white neutral on modern stuff. The only point made here is won't work on some thick cable. I wish I saw more 8/3 unfortunately I'm lucky to see grounds on plugs at times 😆. I'm "glass" I'm "fused" to the job for now!

[@toolsandtactics]

@@MattHmm-rq6dn I got ya

[@Justanotherwhiteguy4U]

I’ve been wearing boulder bags for 6+ years now and they are great. I just ordered myself a pair of diamond backs though, figured I’d try something different I’ve never had anything besides the boulder bags. Hoping I don’t regret it. Only downsides I have found with boulder bags is they stick out from you hips quite a ways which can make it hard in tight spaces, and after 3 years the nylon starts to tear on the seams and corners but overall they are a great bag for the money.

[@Justanotherwhiteguy4U]

Fyi the little pocket on front, I put full rolls of tape in and when I’m phase taping with multiple colors I store the rolls in there to take in and out to not have to deal with the chain.

[@toolsandtactics]

@@Justanotherwhiteguy4U That's a great idea

[@toolsandtactics]

@@Justanotherwhiteguy4U yeah, the layout is really good for construction

[@Justanotherwhiteguy4U]

yea they are great I do a good mix of commercial, residential, service, remodels, just about everything and they work for me in every environment plenty of storage for fasteners and whatever tools you need to carry

[@MindUrOwnBusiness77]

Thankfully my job only requires me to carry my phone, ID, car & office keys. I don't know if I could still carry tools like I did in my pre-college days

[@mbforwood251]

I can think of a number of times when the v-cutter would be useful. Great video…

[@toolsandtactics]

Thanks 👍

[@SaerTurner-wn2qh]

Slick set up seems like a lot for a typical Sparky to carry ... and the ripper is nifty

[@toolsandtactics]

yeah not all this should be carried but it can and some times if im doing a service call i load it ALL up and use it as a tool bag it fits and its all together

[@peterc9166]

Can you give a basic load out for beginner dyi

[@toolsandtactics]

yes, coming up! thx

[@JohnDemolition]

Is there a written list of these?

[@toolsandtactics]

not yet ill drop 1 in future videos soon

[@Hulk2084.]

Better deals on boulder bag website. Love their bags

[@3vil3lvis]

That pouch on the front that you didn't know what was for looks like it would fit a stabila pocket level.

[@toolsandtactics]

@@3vil3lvis it's a bit deep

[@bradw0535]

I like the weight to the back setup. I don't have a need for a full rig, since I do commercial maintenance work. I can kind of setup a single pouch for a specific task and get away with it. Just ordered the diamondback mini niko and flux pouches, we will see 🤷🏻‍♂️. Thanks for the video sir

[@toolsandtactics]

dang i saw that but i dont think its gona deliver looks very long and gona brush your thighs? thanks

[@bradw0535]

@toolsandtactics yeah the mini niko looks a little long, but I'm not against modding my bags if the layout/capacity is what I'm after 👍

[@MattHmm-rq6dn]

That's a good setup for a 701 vest. You don't need everything all the time. A alternative for people is the veto dp3 which many got in the spring promo makes a good primary bag for a diamondback vest or even tool belt.

[@bradw0535]

@MattHmm-rq6dn haven't checked out the vest, but do have the DP3. The vest might help to secure that thing, as it is, seems pretty unstable with just the clip

[@MattHmm-rq6dn]

I put my dp3 on a madpac to make it easy to take on or off and drop it a little lower on my waist. But it will work however you do it. I have long arms I'm even hang my mp2x on a tape clip holder(rackateirs) leather to drop it a tab bit lower.

[@ElectroAtletico]

...would love to see the Tool List for the Local that approves all those tools!!

[@toolsandtactics]

I'll get it soon thx

[@paynfulmakers8405]

Which bag is that, looked on the website and they have a couple different ones, so I didn’t know which one it was

[@toolsandtactics]

@@paynfulmakers8405 I posted a link in the description.It's the ultimate.

[@jro21]

Diamondback tempo belt way better