Taurus Model 856 .38 Special Revolver Unboxing & First Shots Range Day!

[@johndilday1846]

I have had a Taurus 856 for many years, I got it to carry as a BUG when I was a police officer, and it was a reliable pocket pistol. I put checkered boot grips on it when my rubber grips wore down from constant carry. It is a good gun, and I like the fact that it holds 6 instead of 5. I may get me one of the newer 856 revolvers just to have as a spare. I hope you still like yours.

[@Robert_Sparkman_07]

Would you consider it to be as good as the small lightweight S&W snub noses?

[@johndilday1846]

@@Robert_Sparkman_07 The quality of manufacture of the few Smiths that I have had is better than these. That being said, as a police officer, my equipment was rode hard and put away wet. I found the Taurus to be perfectly serviceable for my use, and having the extra round was great for my paranoia. The Smiths were way more expensive and could be damaged too, but they were fixed faster than the Taurus. The main benefit of the Taurus was the lower initial cost meant that you weren’t upset when in the course of duty use it got banged up and scratched. Ruger revolvers were also good, but they weighed a ton.

[@mikeh3084]

​@@Robert_Sparkman_07 Taurus took over the Beretta plant. A lot of the people who use to build Berettas stuck around for to build Taurus so there knowledge got passed down to younger individuals. If you buy a Taurus, your buying a Beretta. -Combat Vet

[@Robert_Sparkman_07]

@@mikeh3084 I bought a Ruger SP101 3". The cylinder is binding. I am planning on sending it back to the factory. I like the way it looks but I am not shooting very good with it. I have a few Glock 43x and a Glock 48...I can do much better with those. I had a Taurus 605SS2 once and it wasn't bad. I think I'd buy another Taurus given what you said, if I was in the market for another revolver.

[@westup2446]

Why don’t you like the UL?

[@genegoodwin8925]

I'm making a switch from semi autos to revolvers. I already bought a Heritage Rough Rider with a 4.75" barrel to replace my S&W .22lr compact and now I am looking at a Taurus 856 stainless to replace my Ruger lc9s. I just like revolvers better because they are simple. I also have a lot of arthritis trouble in my hands and it's becoming a problem loading magazines. The revolvers are much easier for me to load.

[@ToolsandTargets]

There's definitely something to be said about a good revolver.😎👍

[@genegoodwin8925]

@@ToolsandTargets Well, I traded my Ruger LC9s for a Taurue 856 brushed stainless just like yours amd I love it. It is a good looker, I like the weight and the feel of it. It shoots great, but I need to be a better shot. I have four homemade swinging steel targets about a 4: square at, 7, 10,15,and 20 yds. I can hit the first three just about every time, but that fourth one, at 20 yds, I miss more than I hit. I need to set up a larger target there to see where my shot is going so I can correct then problem. (me) Thanks again for your videos, I really do enjoy watching them.

[@Walter_Sobchak_43]

My senior mother bought one and she can shoot the 856 very well. It is a great little revolver.

[@Drucipher6996-y4h]

While I understand military and police carrying semiautomatic pistols because they find themselves in positions where more ammo could be the difference between life and death but for the average person carrying for personal protection if and when you unfortunately have to use it these situations are going to be quick and up close and if you have done your due diligence with regards to being completely comfortable with the weapon on the drawl and proficient shooting it 5/6 rounds are more than enough hell a double tap center mass is more than an adequate threat stopper

[@maxmccain8950]

A lot of people talk about Taurus quality getting better these days. I’ve owned a bunch of model 85’s over the years and haven’t had a bad one yet. I’ve recently added two 856’s, a blued one and a stainless. Again, great little guns. I do wish they would add an option of the high gloss polish they used to have. Great vid sir.

[@ToolsandTargets]

Thank you sir I havent had a problem out of any of my Taurus' either. A polished one would be sweet for sure.😎

[@jeffreybean5363]

I bought my dad that same gun for Father's Day last year he loves the hell out of it the only difference is is the trigger and Hammer are gold. Another great video Tools..🇺🇸🇺🇸🇺🇸

[@ToolsandTargets]

Nice. That sounds fancy!👍

[@ericnorton9748]

I have a black one with gold accents very nice little snub nose

[@justinjones9042]

I've always had good fortune with taurus even back in the 90's .

[@9sunsetdrive278]

I literally just bought mine a few days ago. I felt like it'd be a good starter gun. I cleaned mine before I even used it. So far I like the way it feels and shoots.

[@ToolsandTargets]

Nice. I think it's a great revolver. I've put a tritium front sight blade and some fancy grips on mine.

[@smartacus88]

Went back and forth in my mind between the Taurus 856 and the Armscor M206. Finally pulled the trigger (pun intended) on the Taurus. Shipped and transferred it was about $75 more than the Armscor. Went with the Taurus mainly because of better parts finishing (not as rough) and the fact it was available in stainless, which I got. Carrying it everyday the stainless steel is very appealing. A lot less maintenance.

[@ToolsandTargets]

I like em both but I would have to give the edge to the Taurus also.👍

[@jacspring5459]

Nice. I'm eyeballing a 3" stainless 856 with night sights for a great price right now.... I don't need it at all but the price is great for the features. Great short and to the point review!

[@michaelgibbs3011]

Yes! The 3" is a very capable weapon. So much better than the very expensive name brands.

[@BehindTheGoldenCurtain]

I've had mine for almost a year now. Love it. Once the trigger gets broken in, it is smooooth!

[@ToolsandTargets]

I just ordered a night front sight blade for mine and a fancy set of grips. Sweet little revolver.😎

[@jeffreyrobertson7652]

Nice looking Taurus Revolver we bought our Daughter in law the Black one She Really likes it Great video Tools Stay Safe Stay 2A Strong 🇺🇸

[@ToolsandTargets]

Thank you sir. This is a great little revolver so far!😎

[@jeffreyrobertson7652]

@@ToolsandTargets I like the way the grips feel they are good shooters

[@ericvantassell6809]

Y'all won the in-laws of the year award right there!

[@steveperry3538]

In expensive no longer means lesser quality. It’s fun watching gun companies compete. I’d carry a 686 in a heartbeat. Good video T.

[@ToolsandTargets]

Thank you sir. Agreed. There are tons of super nice inexpensive guns out here now.😎

[@jw-sigp2258]

I’ve got a 856 UL and I love it. I mostly practice with standard pressure hand loads. But I do occasionally shoot good full power 38 special +p out of it and find recoil very tolerable and easy to hit with even when shooting quickly.

[@ToolsandTargets]

Nice. This one has been great!

[@Walter_Sobchak_43]

My senior mother got one for home-defense and carry. It is a great little revolver that shoots very well for it's size. The recoil is surprisingly light for such a compact revolver. Almost even with my full 4 inch barrel Ruger .357 when shooting .38 special. Taurus did a good job on the 856.

[@ToolsandTargets]

I think they're great guns.

[@louisirwin2474]

Haven’t had any complaints about Taurus revolvers, and this one looks to be a great heir to the Detective Special.

[@ToolsandTargets]

I really like my Taurus revolvers. I'm actually about to go pick up a 605.👍

[@Donald_R_DeCicco]

I really like the brushed look. I've heard all types opinions on em, personally never had any trouble with Taurus

[@slickdazzler7330]

Great looking little 38. Taurus has always made a pretty decent revolver.

[@ToolsandTargets]

So far I'm definitely happy with it.👍

[@seanmathews1826]

They're fine as long as you don't shoot them. 😄

[@ironhorse127]

@@seanmathews1826Geez I hope not.

[@rrswtf]

I have it in all black. All I can say is wow. It’s amazing little gun especially at the price. Definitely highly recommend for a carry purchase

[@ToolsandTargets]

Agreed. It's an excellent revolver.👍

[@ToolsandTargets]

@Some Guy 99 Yessir.👍

[@cloycespears9632]

Bought the 605 and had to send it back after 11 rounds, it was shaving lead because they forgot to throat the barrel. Don't get me wrong I love Taurus firearms, I own several.

[@ToolsandTargets]

Ahh, that's a shame. I've been pretty lucky and haven't had any issues with any of them so far.

[@60jscott]

I noticed where the deflected shells lands thanks to your dry conditions at the range. That was very informative to my limited knowledge (increasing though!). I love my 856 and have had (and loved) the RI 206 (stupidly sold it on a whim) and your mention makes me want to go get another one. Thank you for posting your videos!

[@joshuasutton4043]

Love my old 85 snubby with original wood grips and stainless steel

[@joehelvey5794]

I love my m206 it’s really about the most gun I’ve ever gotten for my money. It’s a rock solid gun, that said the Taurus is still an upgrade. Great buy 👍

[@ToolsandTargets]

I think they're both great little revolvers.😎

[@JamesHackett-kv4ki]

​@@ToolsandTargetsI totally agree love both

[@JoeZ-et1pr]

Fun review. My 856 38 snubs tended to sandpaper my hand. So, I just bought two more with the walnut longer grips. I can't wait to shoot those. Keep Attacking, T&T!!! Good job.

[@Dan-or7fb]

Nice. Like the fact it has the removable blade front sight. Lots of nice 85 grip options out there too.

[@ToolsandTargets]

Yeah, I thought that was pretty cool too. There are probably some nice fiber options you can replace it with. I'm definitely gonna check out some grips. These aren't bad but I can't leave well enough alone!😆

[@Dan-or7fb]

@@ToolsandTargets done a few stone and spring jobs on these. Can get a real slick action with a little tlc.

[@ToolsandTargets]

@@Dan-or7fb Oooh I bet it's super nice after that!😲

[@UNDERCOVER_E]

Personally I feel the rock island version is much heavier. Originally when I was purchasing my revolver I wanted that rock island snub, but after holding them both and testing the release pin, and the cylinder I much preferred the Taurus. I’m very happy with my decision thus far 😀 your video helped me!

[@ToolsandTargets]

Taurus definitely has a better fit and finish.👍

[@WhiskyWoof]

This is really good to hear. I’m between the Taurus 856 and the RIA m206 and the choice is difficult lol

[@UNDERCOVER_E]

@@WhiskyWoof if you have the extra cash, definitely go with the Taurus. I will say, I got the ultra light titanium Taurus and somewhat wish I had gotten the regular 856, love the weight of the ultra light when carrying, but boy does it kick! 😎

[@JamesHackett-kv4ki]

​@@WhiskyWoofI find both about the same

[@azone123465]

I had this and I had to locktite the screws. I got the .357 version for $50 more later and gave this to my mom. The .357 screws have not come loose. It is only a 5 shot so it's nice knowing one round could end a self defense situation more than likely with a .357, I can handle the recoil so it not so bad.

[@keithbays2724]

Taurus has really improved its products over the years. The only complaint I have with any Taurus I’ve bought is with the trigger on a little bobbed hammer .38 I got for my wife. I got the bobbed hammer so it wouldn’t catch on anything in her purse. It only runs in double action, so it seems like you’re squeezing that trigger for about two days before you get a shot off.

[@ToolsandTargets]

Yeah sometimes them double action only's seem like you need to catch a taxi to get to the trigger break.😆

[@SanteeTV]

It really is a nice looking gun. The grip looks solid.

[@ToolsandTargets]

I thought so too. Grips actually feel pretty nice too. Appreciate you checkin it out.😎

[@randyadams03]

Hey ! Santee!!

[@SanteeTV]

@@randyadams03 Hey Randy!

[@randyadams03]

@@SanteeTV when next live stream

[@thepreppingpreacher5530]

@@SanteeTV Did you get baby brother some MREs?

[@kenworland1865]

I’ve got the Ultralight. It shoots well! It’s very light, one I carry in the summer. Not snappy at all with regular ammo! +P stuff you feel a tad but Taurus does a pretty nice job with their grips!

[@ToolsandTargets]

Yessir. These grips are pretty good on the .38. I've got a .44 Mag tracker and the checkering on the backstrap dug into my hand pretty bad with the recoil but they work on this little guy.😎

[@wicked_eight8015]

+p shouldn’t be ran through the ultra light

[@kenworland1865]

@@wicked_eight8015 Not true

[@mikecunningham7621]

@@wicked_eight8015 Incorrect.

[@mikecunningham7621]

I have to disagree about the factory grips on the 856. I didn't like them at all. The main problem is that they completely fill the area behind the trigger guard forcing a lower hand position. I replaced them with the Pachmayr wood grips. Amazing improvement!

[@FMDad-dm5qo]

What I’ll say about Taurus wheelguns: there are some problem guns, but in my experience if something’s wrong you can generally catch it with the naked eye by inspecting it at the store. If the sights are cut straight, the action cycles normally etc., you are probably good to go and they can turn out to be nice trustworthy tools. Double action triggers will smooth out with use for sure, and the nice single action pull you encountered out of the box is typical. Six rounds instead of five is a nice improvement.

[@ToolsandTargets]

All of mine have been great, but I always look over everything and make sure it's all tight and right before I take it out for the first time.

[@randlerichardson5826]

Tools that’s a nice revolver now. I have 3 Taurus semi-autos two 9mm’s and a 380. I finally found the load my 9’s liked 124gr bullets loaded hot. This is the first time I’ve seen your videos

[@ToolsandTargets]

Thank you brother. I haven't had problems with any of my Taurus'. i think they're great guns.😎

[@josephpacchetti5997]

Seems to me that the 4" would have expanded more, Back in the early 80s when I was a Deputy Sheriff, I carried a 357 Magnum with Remington 125gr SJHP at 1,450 fps from a 4" S&W Model 19-1, and for back-up a Beretta 950-B w/tip up barrel in 25ACP, the main problem with the magnum was muzzle flash, It was like popping a flash bulb in your face at night or low light, It was white and as big as a basket ball, So I got some Federal rounds and it was more like an orange ball of light the size of a softball, you we not joking about price, It's been awhile since I priced any and damn they are way up there. Thanks for the test. 👍🇺🇸

[@ToolsandTargets]

😎👍

[@nickburnett501]

I love that you call the locks hanging targets that’s actually a really good idea lol

[@ToolsandTargets]

That's about all they're good for.😂

[@Me2Lancer]

Enjoyed your review. I'm carrying my Taurus 856. Have had it since it first hit the market.

[@ToolsandTargets]

Thank you sir. I've fancied mine up with some G10 grips and a tritium front sight blade since this. I think it's a great revolver.😎

[@ex07m]

Great video. I just picked up the same stainless steel 2 inch yesterday and the 3 inch Tungsten Grey version with the wood handle.

[@ToolsandTargets]

Nice! It's a great gun so far. Appreciate you checkin out the vid.😎

[@lloydryan-e4l]

My recommendation for making a Taurus 856 more user friendly is replacing the hammer and Trigger springs with Galloway Springs on my ultra light it brought the double action pull to 6.2 pounds and the hammer fall to 3 pounds much better for an old man.

[@johnblood3731]

Bought a used on like yours for my wife. she said she wanted a new one. Got her a new blue one and i got the used one. We both won.

[@alraetz1999]

Awesome nice piece Taurus doing well with their guns lately

[@ToolsandTargets]

Thank you sir and yeah, they're turnin up the heat for sure.😎

[@MrSamurai47]

Why don’t you like the ultralights? ?

[@PetuniaIii-pd1ww]

My missus carries an older model 856 that is not +p rated...she is just fine with it...simple and reliable is a good combination...

[@ToolsandTargets]

Absolutely. This one has been great so far.😎

[@bobgerber-pm2ec]

I really like the fact that we don't have to watch you load each cartridge and you pack a lot in a short time

[@boogerdog5247]

Out of the box trigger pull weights on double action...trending down...I'd like to see a retest of double action pull weights after some break in. Not that it is that critical in double action mode, but curious just the same to see if my "trend analysis" is an aberration or if it settles in under ten pounds. Nice weight on single action pull, and that pistol is a solid firearm. Hate to get bonked in the head with that frame...just sayin...

[@ToolsandTargets]

LOL, yessir. If you run out of ammo, just get in close and start swingin!😂 I'll have to do a follow up on this and a few other guns I have after I run a few hundred round through em.👍

[@boogerdog5247]

@@ToolsandTargets That's a winner pistol. I'm flush in 38's, but eyeing that beauty, makes me want to add to the numbers for sure. I have expensive Colts, blued, and not ideal for lounge'in around all the time in a vehicle and Fl. humidity, so stainless is almost a must have. Just the same, you're gonna like that pistol more as time goes on.

[@ToolsandTargets]

@@boogerdog5247 Nice! I'm flush in guns period but I got that sickness!😆

[@CD-xn1su]

Just got a Taurus 856 38 special this weekend not a huge gun guy so all I knew it was in my price range and more importantly the salesman said it was a solid gun or I would not have gotten it. Glad I made the right choice

[@ToolsandTargets]

I think these are great revolvers. I have this one and the 605 and 327 models. One thing I would highly recommend is getting a nice set of grips for it. It will change the shooting experience drastically for the better. I put ZV Grips G10 on mine, but Hogue grips make some nice, lower priced options.

[@pdog305301]

Another quality review bro. I was in the market for a little pocket revolver that doesn't break the bank and works well. It's even small enough for my 13 yr old could handle very well. I saw one recently at my LGS the UL model for a great price I had to snatch it up. Looks like something I could conceal very well or just have in my glove compartment. Now if only the 38 special ammo could come back things would be perfect.

[@ToolsandTargets]

Thank you sir. I've been pretty lucky to find the ammo at RK at good prices but I've seen some ridiculous prices on it at other places.😣

[@michaelgibbs3011]

No 3" six shot can be carried in a pocket, at least not reasonably. And hey, any gun in your pocket is quickly accessible if you are seated. Defense weapons belong on your belt; so says anyone who might need a gun "right now.)

[@michaelgibbs3011]

Oops. I meant "quickly accessible."

[@michaelgibbs3011]

Rats. I meant NOT quickly..

[@Skaramine]

It's hard to improve on the original 85, but adding a shot did its magic. Great review.

[@woodpony34]

I had a 85 that broke with magtech 38s, sent it back and it still would jump time. Gonna get 1 of these sat and try it, looks built a lot better

[@ToolsandTargets]

This one has been perfect.😎👍

[@tannerstultz5339]

Just bought one like an hr ago.... Haven't shot it but this is my first revolver.. Deff a nice looking gun for the price... 319.00 after tax it was 350.00

[@ToolsandTargets]

I love mine! I've put some fancy grips and a tritium front night sight blade on mine.😎

[@YO_HO_2EASY]

I own the 856 Ultralite she’s been good to me, no complaints at all 👌

[@ToolsandTargets]

This one has been perfect. I put some new grips just for the looks and a tritium front sight blade on it since this.😎

[@skiphinson8620]

Great video! I picked up one today. 856 stainless. Like yours it’s smooth, crisp, locks up tight and shoots pretty much right on minute of Vienna sausage can at ten to twelve yards. Very limited range test so far but it’s gonna be a good one!

[@ToolsandTargets]

"Minute of Vienna Sausage can." 😂😂😂 Love it!

[@samuelmorado70]

I just took my 856 out of the pawn shop used for $202. I bought some 135 gr. WOLF ammo for 20 bucks a box of 50. Flat nose . Im gonna get the Horndaddy Critical defense LITE. I carry the WOLF for now. Im a cheap ass. LOL i have a P-32 as backup. I will look for a 22 LR version. These just go BANG Everytime. Very dependable. I will order the plastc stripper clips.God Bless. Hello from Lubbock Texas. 😊

[@JohnnyJPatt]

I bought one myself. I carry it for personal defense every day!!

[@ToolsandTargets]

I think it's a great revolver.👍

[@michaelschaffer5984]

Taurus has a tritium front sight for that. Also they have wooden grips and a variety of holsters in their store.

[@ToolsandTargets]

Nice. I might have to take a look at some goodies for it.😎

[@mofatjippyfransisco713]

The weight and the brushed stainless sold me yesterday, bought the same one...9 more days till range day !!!

[@jordom1416able]

Been wanting to add a revolver to my edc rotation, been looking at one of these

[@ToolsandTargets]

I really like this one.👍

[@tonyrebel63]

I had a snuby and got rid of it for a 3 inch. I love it a lot I use it for daily carry sometimes when am not walking with the 605 mag. I did get a 66 for Christmas. So I will take it to the range and see what it can do lol

[@ToolsandTargets]

Gotta have em all!😎👍

[@tonyrebel63]

@@ToolsandTargets I love all of them.

[@Pewpew22lr]

Ive looked at those a few times I've had the 5 shot version never had any problems out of it

[@ToolsandTargets]

It's a sweet little revolver so far.👍

[@MidwesternOutdoors01]

Been watching ya for years now tools, just got my 856 today and I had to loop back and rewatch this one ❤

[@ToolsandTargets]

Nice! Shot it yet?

[@lazygamer9725]

Love my 856 tools... use to have a 3 inch ultra light 85 nice blued finish... idk why Taurus doesnt do that anymore.. fit n finish was up there real nice

[@ToolsandTargets]

Probably costed em more than the flat finish they use now.😣

[@freedomliberty895]

I have it in the ultra light and it shoots everything I put in it. Maybe a bit more snappy but very manageable. Oh I am 72 years old.

[@markapril0206]

Nice looking little gun. So many people say taurus is a crap gun. Must not have given them a chance. They look like they stepped up the game.

[@ToolsandTargets]

Yessir. I have never had a problem with any Taurus I've owned.👍

[@hawks2252]

just my experience - i have about 75 rounds through my 856 and the cylinder just free spins and won't lock up. Taurus says through email they will send me a new plunger and spring (5 months ago and have not received it). I would not trust it as a carry and never will.

[@davidbreen4727]

good review. i have arthritic hand problems. i prefer 22's. but the 856 was on sale, and i wanted something with a little more punch, so i bought one. haven't practiced yet, breaking in a iwb leather holster. when all the holiday crap is over i plan on going to the range and see how it handles. your video looked good with little recoil and accuracy. thanks.

[@ToolsandTargets]

Nice! I think you'll really like it. It's a great shooter and not too bad at all with the recoil. I've actually upgraded mine a little since this with a Tritium front sight blade and a fancy set of VZ grips.😎

[@mrmann44]

A 3" 8 round 22WMR is on my list!

[@jeffreylight3375]

Great Vid. I love that gun! I also have the 3” version the 856 Defender. Both are great shooters! Thanks for confirming. Nice work! Keep em coming!

[@ToolsandTargets]

Thank you sir! I think Taurus makes some great revolvers.😎

[@tymccutchen]

Just got the 3" Version in ss. Its a keeper.

[@ToolsandTargets]

Nice. I think they're great revolvers.

[@chrismartinez3625]

Bought this revolver im love with it . Really well put together gun.

[@ToolsandTargets]

I agree. I think it's great. Just ordered some fancy VZ grips and a tritium front sight blade for mine. 😎

[@loveforever8661]

It use only 38 cal ?

[@MrFieleke69]

I don’t understand why does it change from 9 pounds to 3 pounds for different actions of fire? & How do you change it

[@ToolsandTargets]

For double action/single action revolvers, you can fire them two ways. If you pull back the hammer first and then pull the trigger, you are firing in single action and all you are doing when you pull the trigger is releasing the hammer and striking the firing pin to fire the gun. That gives you far less resistance than the second way, which is to simply pull the trigger without first cocking the hammer. That is considered double action because the trigger pull is both cocking the hammer and firing the gun. There is greater weight because of the increased resistance of the trigger pull from it rotating the cylinder and cocking the hammer before releasing the hammer and striking the firing pin.😎👍

[@ulfricthorsson8347]

The 856, loaded with Hornady critical defense ammo, is my EDC.

[@ToolsandTargets]

Nice.😎👍

[@larrytmmons4219]

I've been looking at that exact model, thanks for sharing Tools.

[@ToolsandTargets]

It's a great revolver so far. Thanks for checking out the vid.😎

[@Halfmilesniper]

Nice work there Tools. As a revolver shooter I'd like to offer up a suggestion...choke up on the gun a little. I shouldn't see any of the gun between the top of your hand and the knuckle of the frame. It gives you more control of the gun and lightens the trigger pull (changes the angle of the leverage, from the angle of your trigger finger). You can see what I'm describing in my last couple revolver videos.

[@ToolsandTargets]

I know what ya mean for sure. The problem I have with these little .38's is I have very big hands/long fingers and I have to try to tuck my thumb out of the way so it doesn't get smacked by the back of the cylinder. That causes my grip to get a little wonky for sure. I don't have that problem too much with larger framed ones like my .44 mag. The Rock Island is even worse because it has that skinny little wood grip that I'm too stubborn to change because I like the looks.😂 Appreciate the advice brother!

[@Halfmilesniper]

@@ToolsandTargets Big hands, little grips do create their own set of issues that's for sure. Choking up will still likely help I think.

[@JanKratina]

Rám vypadá jako přesný odlitek ze slitiny hliníku s minimem obrábění. Je celý nalakovaný a to i v místech, kam dosedají součásti bubínku při zaklápění a čela nábojů. Lak vypadá, že vydrží hodně, ale stejně mám obavu, že se to v místě, kam zajíždí středový aretační kolík při zaklápění za nějaký čas poškrábe. Ale to nebude vidět. V místě úderníku je zalisovaná ocelová vložka, která má průměr menší, než je plocha čela nábojnice, takže nevím jestli to není jen vedení úderníku. Některé slitiny hliníku sice dosahují pevnosti měkkých ocelí, ale přesto výrobci rámů z těchto slitin zalisovávají pod čelo nábojnice ocelovou vložku jako výztuhu, aby se při zpětných rázech rám nevymačkával. Výrobce žádnou munici nezakazuje, kromě +P. No, budu používat munici 38 spec. WC, která má menší zpětný ráz při slušné zastavovací schopnosti. Dílenské zpracování odpovídá ceně, měl jsem 2 revolvery Alfa Proj, které měly zpracování o něco lepší, ale také byly dražší. Například bubínek se u Taurusu otáčí s lehkým odporem i po namazání, u Alfy se otáčel jako na ložiskách. Ale na funkci to vliv nemá. Zjistil jsem tyto hodnoty: Odpor spouště při režimu SA = 4 kg Odpor spouště při režimu DA = 8.4 kg Váha prázdné zbraně 450 g Váha nabité zbraně 550 g Při střelbě v režimu SA dosahuji téměř stejné přesnosti, jako u jiných zbraní. V režimu DA bych strefil tak ta příslovečná vrata od stodoly. Tedy při akutním nebezpečí na krátkou vzdálenost střílet v režimu DA, pro mířené rány SA režim. Jinak jsem se zbraní spokojený, pro nošení je ideální.

[@ToolsandTargets]

Mám také modely .357 magnum a .327 magnum. Myslím, že za tu cenu jsou to skvělé revolvery. Díky za komentář! 😎👊

[@sware8466]

I've had mine over a year and I love this 856 38 a great shooter

[@ToolsandTargets]

Nice. I just ordered a fancy set of VZ grips and a tritium front sight blade for this one.😎

[@combatmedic91-b76]

I had a Taurus 357 revolver in 1986 & traded it in for a Beretta 9mil. I like 357 round & i have a Henry X 357 lever action & need a buddy for it but can't afford a smith & wesson revolver. I would like a 3 inche barrel not much into snub nose.

[@ToolsandTargets]

All of my Taurus revolvers have been great.😎👍

[@bigbossman3806]

I have the same exact gun, looks good, shoots good and priced good. It don't get much gooder than that.

[@ToolsandTargets]

The most goodest!😎

[@zazkariafrady9152]

Nice review on the 856. I used to have a 642 J frame and was looking at something to refit that role. Nice shooting btw.

[@ToolsandTargets]

Thank you sir. It's a great little revolver.👍

[@wreckagevic]

Got the same one last weekend. I actually preferred the pinned sight being black instead of the all stainless sight on the other one .

[@ToolsandTargets]

Nice. It's pretty cool that they made it removeable so you could change it out for something else if you wanted.😎

[@Cordellio7.62]

Great feeling/looking pistol! Been wanting another one and I'm glad I went with this one!

[@ToolsandTargets]

I really like em. Actually have a black one still brand new in the box that I bought just to have it.😆

[@MitchC357]

I have the 605 .357 5 shot .357. I like it. Nice your gun has 6 shot. The stainless is comfortable carrying to me.

[@ToolsandTargets]

Nice. I was looking at a couple of .357's earlier. Might have to get one soon.😎

[@williambrassfield4155]

I have this exact same model, and I am very impressed with it.

[@ToolsandTargets]

It's a great revolver. I upgraded mine since this with a tritium front sight blade and a fancy set of VZ grips.😎

[@dawgofwar71]

my ria m206 came with 2 grips and i got rid of those skinny wooden grips as soon as i got it.

[@ToolsandTargets]

Yeah, same with mine. I left the wood grips on it just for the look since I have this Taurus too.😎

[@randallhouse2772]

Awesome lil’ revolver surprisingly accurate for a snub nose !!!

[@garycombs9435]

Try a set of Galloway Precision springs. Improves the trigger pull greatly. I've had no light strikes using them.

[@ToolsandTargets]

Interesting. I'll have to take a look at those.

[@dumpsterchicken6287]

Just bought one of these, love it.

[@ToolsandTargets]

I think it's a great revolver.👍

[@christianhardwick6530]

Why don’t you like the ultra lite ?

[@ToolsandTargets]

I would just rather have some weight to my pistols. Really just a preference thing.👍

[@dustybowhunter]

Im glad you’ve never got a lemon, i got a couple of them over the years, one the barrel was full of rust

[@ToolsandTargets]

That's just character!😜

[@GingerAleDude]

I like the 38 snubs. I'm still unsure what's the best ammo to carry. Everyone has a different opinions. Seems too many tacti-carry specialists are too preoccupied with arguing which 22 is the ultimate "defensive" round and no one cares that the old 38's did the job for a very long time.

[@ToolsandTargets]

The Punch and Silvertips both did fantastic on the .38 gel test I did. I'd carry either one of those for sure.😎

[@robwilson3749]

158 grain FMJ flat point.

[@jbhickok7796]

Great video. Now will you please put the other grip on the 206 and give it run?

[@ToolsandTargets]

Thank you sir. I bought the 206 specifically because of the look with the wood grips. There's no doubt the black plastic ones are a better option if you're gonna carry it and want the best shooting experience.

[@tyroneturner4215]

I have one along with the 905 and like them both. But they'd be super nice if they had the trigger of the 357 Tracker I was stupid enough to sell.

[@ToolsandTargets]

Yessir. I like this revolver a lot. I also have a Tracker in .44 Mag.

[@josephmitchell2635]

The taurus 856 executive grade really nice 3" barrel very good trigger

[@marcthomas2482]

Another great video Tools. I'd like one of those 856's but I blew the budget on the GX4 at the beginning of the month and an old Model '94 last week. I already have two snubbies I rotate anyway, an LCR and an old H&R in .32 mag. Thanks for a thorough review!

[@ToolsandTargets]

Thank you sir! How ya liking that GX4? I carry the p365 but I'll probably grab a GX4 once my RK gets it in stock just to compare.😎

[@marcthomas2482]

@@ToolsandTargets I do like it but I want to shoot it more and once I make a holster for it I'll carry it awhile and see how it goes.

[@The_Conspiracy_Analyst]

I like the Executive, but not a fan of the bobbed hammer. I wonder if it's parts compatible with standard 856 hammer so it can be swapped out

[@NativeMatt]

Got one for the wifey with just 130g FMJ so far, ISO .38 in JHP or similar.

[@ToolsandTargets]

Nice.😎

[@bigtrev761]

🇦🇺😎👍Nice…. I missed his video… I like those little revolvers….I wonder why the trigger pull varies so much🤔💭…we missed you on Friday ( our Friday)….that is a nice little shooter🏁…great video mate

[@Brett235]

I have a tracker 357 magnum 4" and it has the same grips as your 856. I'm looking at buying one for carry. Thanks for the review.

[@ToolsandTargets]

I have a Tracker in .44mag. Nice revolvers.

[@kirkg97]

Great review bud l’ve been looking at this Taurus for wife l want her to have a 6 shot revolver and l think you just sealed the deal!👍

[@ToolsandTargets]

Thank you sir. I love mine.

[@The_Hi_Life]

I have this revolver with the factory G10 grips. It’s a great little shooter👍

[@ToolsandTargets]

Nice. I've added a tritium front sight blade and some G10 grips to this one.😎

[@MitchC357]

I have a question. I have the 605 Taurus with that safety in the hammer that you use the key. I never use it but worry the lock may go on when I need it. Are these locks reliable? Does this gun you show have a Hillary hole lock?

[@ToolsandTargets]

This one doesn't have it but my .44 mag Taurus tracker and an older PT709 slim semi auto that I own also has that safety system too. I never use it and it hasn't given me any trouble with either gun through quite a bit of rounds. I would never use it because I think those kinda things are a liability. When I need to get to my weapon fast, I can't be messing with trying to find a little tool to make it operable.

[@megatrends]

I want one ... that's what I think. My brother has two Taurus revolvers in stainless with this finish and they are fantastic shooters. he has the 357 and the 44 magnum. You can't go wrong with Taurus .... don't mention that Judge thing .... lol.

[@ToolsandTargets]

😆😆😆

[@alextepe4309]

How’s the recoil on that? In my experience, snub nosed revolvers have been a handful to shoot.

[@ToolsandTargets]

It's actually very mild. One of the better snubby revolvers I've shot. I have some nice G10 grips and a tritium front sight blade on this one now.😎

[@Icecream-edible]

I wish revolvers would come with a pic rail for lights. I love revolvers but i must have a light on any home defense pistol. I know there's a select few that have a rail but i wish more had one, or some other way to mount a small light.

[@ToolsandTargets]

Yeah, they would probably get used a whole lot more for home defense if they did.👍

[@1sinister80]

I just pick up one of these for a boot gun. I really like her so far no complaints.

[@ToolsandTargets]

Nice. I think it's a great revolver.

[@deannbabs902]

Had an 85 UL a few years ago…loved it. Was a lil too bulky for carry, so traded her for a Ruger LC9S Pro. After seeing your vid, makes me want to save my pennies for an 856. The stainless would be a nice companion for my stainless GP100. Love the vids Tools!

[@ToolsandTargets]

Thank you sir. I love these little Taurus revolvers.

[@professorpewpuew]

New to the channel and thankful you are burning some very valuable 38 Special ammo.

[@ToolsandTargets]

Thank you sir. May as well have some fun.😎