DeWalt DCF860 VS Milwaukee Gen 4 kzbin.info/www/bejne/qaOomoaaf9eAjJY
@default97404 ай бұрын
Try stripping down the 850, clean the speed switch with contact cleaner followed by compressed air. There’s a bit of grease used on assembly, add dust and grit to that, the contacts get bridged.
@cryptodojoau54254 ай бұрын
Just FFS! I have the 220nm Milwaukee. It has all the other impact drivers on site for breakfast! "Hey, I can't get the screw I just put in, in the wrong spot, out"! " Bring the Milwaukee over"! Now I have to have this!!!! F! 😂🤣😂
@johannkrist27 күн бұрын
there is a new kid in town. 282nm Dewalt DCF860 it´s been beating the Milwaukee constantly with other youtubers.
@wrefk4 ай бұрын
I feel like impacts have hit a limit already a while ago, the 1/4 bits just cant handle the torque and break before the driver gets maxed out. Crazy improvement on that 860
@nominalvelocity4 ай бұрын
Agreed, they need a beefier shank standard for the next generation of drivers, 8mm would make a lot more sense for impacts this powerful. Hopefully the Japanese companies drive the standard so we get stuff like double sided bits and such.
@aaronoconnor6064 ай бұрын
@@nominalvelocity that would make sense. I think that's why makita and hikoki don't build impact drivers that are as powerful as dewalt and milwaukee. Not really any point when the bits can't take the torque
@Lee-lb9qh4 ай бұрын
@@nominalvelocitydon't need any of that, it's called a 3/8 or 1/2 impact wrench, get one!
@SupposedlyShiny4 ай бұрын
I’d really like a mid torque 7/16 hex
@jaywelker55664 ай бұрын
I've never broken any of the T40 bits that come with a box of large torx screws. I've seen plenty of impact drivers that couldn't sink those screws though. The Milwaukee Gen 3/4 rarely struggled, and it's nice that Dewalt's going to finally try and leapfrog them.
@86Sando4 ай бұрын
I have a DCF850 and use it daily but only on speed 2 as speed 3 is too much juice. However that extra bright LED and 20min function would be awesome but I can’t justify spending $370 AUD just for a skin. Thanks for the comparison mate.
@dustinkrebs82294 ай бұрын
Compare to the milwaukee gen 4
@ToolsAndStuffOFFICIAL4 ай бұрын
Will do
@killer997s4 ай бұрын
I’ve seen a comparison it loses against the gen 4
@Offgridwilderness4 ай бұрын
@@killer997stake another look at this channel, the dewalt beats the gen 4 nearly every time. He just did the video
@Agatonga3 ай бұрын
.......since you BOUGHT it.
@jmackinjersey13 ай бұрын
@kyleostrowski2611 , TTC released the video amd the Milwaukee beats the DeWalt. Heck even the Ridgid beat the DeWalt when installing/tightening. However, the DeWalt beat the Milwaukee by 4 lbs torque on tightening. Not enough to worry about amd definitely not enough to throw my Milwaukee out and buy DeWalt. Also not enough to throw a huge parade either. These impacts are meant mostly for installing screws, not removing bolts/nuts.
@Mrjpk19714 ай бұрын
I've had my DCF860 for two weeks and yes it's a beast. It even makes my TD001G look under powerd
@Dave-dh7rt4 ай бұрын
I have had the TD002G for 2 years now, still runs like a champ. Love that its water resistant. Ive dropped it in buckets of water and its fine.
@petro54 ай бұрын
Where’d you get it?
@Mrjpk19714 ай бұрын
@@petro5 Sydney Tools
@hosainparchment56923 ай бұрын
Where did you buy it?
@brianf96194 ай бұрын
About Freakin Time DeWalt ... Ive been waiting a Looong time for this , when they finally updated their Impact Wrenches I didn't think we would have to wait this long for a New PowerHouse Impact Driver , still hard for me to believe...😂🤣
@kk83y4 ай бұрын
I want to see it vs Makita 40v and vs Milwaukee
@hammyzgod4 ай бұрын
I've had my dcf850 a little over 2 years now, and it's been as solid as a rock, not a single issue with it and has been my no 1 impact go to since i brought it.
@aaronkowalewski6593 ай бұрын
I feel the same way! I absolutely love my DCF850. I have the Milwaukee Gen 4 2953 which is an animal but the Dewalt is my go to driver
@vlad18893 ай бұрын
@aaronkowalewski659 I've been torturing my gen 4 red for 6 years. It's all busted up, but it still works. Although, from what I heard and saw the new versions are not as reliable. Might wait for another update before switching.
@hammyzgod3 ай бұрын
@vlad1889 the gen 4 hasn't been out 6 years! What are you on about.
@hammyzgod3 ай бұрын
The gen 4 was released in 2022, the gen 3 came out in 2016.
@shawn_369Ай бұрын
I converted a dcf850 to an impact wrench & it's been an awesome little work horse for me. Zero issues so far & it's seen a lot of use. I also frequently use all 3 settings with no problems.
@Dave-dh7rt4 ай бұрын
Cant wait until makita releases the TD004G. Hopefully it has the ring light and is significantly more powerful.
@dangray13104 ай бұрын
Nice video, thanks. Seems unfortunate about the 850's unreliability issues youve had. It's my daily use driver and mine has had no issues, same with the 887. I have had trigger issues on the 887 and the DCD796 drill, though, constant trigger pressure, but the RPM's will vary, must be a loose connection?
@robertpaget8094 ай бұрын
A real dewalt Milwaukee fight finally after fobbing us off with junk
@florinG3 ай бұрын
887>>> 59£=good deal, 860>>> 200£=no thanks.
@PageMarker14 ай бұрын
DeWalt tools for wood, for all else go Team Red! Not so sure that holds water these days, if it ever did. For years, nothing beat Milwaukee on drills and impacts. As a DIY, Fuel 12v would probably more than suffice for me.
@KevinLatash4 ай бұрын
It's just not purple--with-a-ring-light enough.
@AllodialTitle4 ай бұрын
For bigger screws I use the dcf922, lighter jobs the dcf887.
@default97404 ай бұрын
Tried the 860 side by side with a 922 wrench the other week. Nothing in it. Beast of a tool for the size!
@igorgoza85822 ай бұрын
За ціну 860 можна купити 2 887
@riba22334 ай бұрын
282? Oh boy, those poor collets 😅
@ToolsAndStuffOFFICIAL4 ай бұрын
Yeah 100 more than a 173
@rayw669017 күн бұрын
Any chance to compare dcf860 and dcf870? Since 870 only have 50Nm torque.
@BlackenedEclipse2 ай бұрын
Just got mine and this thing is a tank of a beast impact driver. What I like about my Dewalt is they stay relatively cool compared to Flex’s and Milwaukee’s flagships
@ToolsAndStuffOFFICIAL2 ай бұрын
Got mine super hot yesterday. But it does take much longer than the gen 3 and 4 Milwaukee.
@aussiehardwood61964 ай бұрын
Even with the bug 10" timberlock screw they ALL finished within under 3 seconds of each other. So even after screwing in hundreds of these screws u might save a few minute. 🤔 Either of these tools are perfectly suitable for their intended purpose.
@derrickthd4 ай бұрын
When you're working with a tool all day it makes a big difference. It's not just the time but the fatigue as well. Especially if you're doing them horizontal or at an angle where you can't put your weight into it. He's testing it in a very comfortable position. Try driving long bolts while on a tall ladder, laying on your side or above your head. A lot of work has to be done in awkward positions and that's where the small advantage is multiplied.
@misha0303024 ай бұрын
Still don't understand why they released the 840 and 845 if after less than a year they release the 860.
@ns_racing4 ай бұрын
Been 2 years for 840 and 1 year for 845 now. They have been releasing a new one every year last few years
@robbie1543 ай бұрын
The 850 is just so tiny. No need for a 12v line anymore. Put a bigger battery on when you need, put a 2ah on when you don't.
@haydenjohnson15204 ай бұрын
My 850 also changes speed without switching modes. I use the screw mode to screw in the terminals on outlets and sometimes it’ll randomly switch to speed 3 and completely strip out the screw and sometimes the threading of the receptacle. If you bang it on the ground it switches to the mode you need… til you drop it Had it for a full year. Kinda disappointed as it’s my first impact and my journeyman’s impact is about 3 years older than mine and his works with no problem
@ToolsAndStuffOFFICIAL4 ай бұрын
The 2 Minute Version kzbin.info/www/bejne/i5DOlod7lNVmbJI
@isaaccaris95304 ай бұрын
A new standard on impact driver.. 2024 is on history... other times was milwaukee in 2018 smaller and stronger. I just wanna see next video dewalt vs flex or milwaukee
@aaronkowalewski6593 ай бұрын
My DCF850 has been hands down the most rrliable driver ive ever owned. So im kinda shocked to see you having issues it.
@FIN4L_BOSS4 ай бұрын
Any idea when this will release in the U.S?
@ericnichols92754 ай бұрын
We Always seem to be LAST
@ToolsAndStuffOFFICIAL4 ай бұрын
@ericnichols9275 Rubbish. DeWalt and Milwaukee are usually released months before the rest of the world.
@ericnichols92754 ай бұрын
@@ToolsAndStuffOFFICIAL does not show up on any tool sites like ACME or OHIO Power tools
@ToolsAndStuffOFFICIAL4 ай бұрын
Yes on THIS occasion you weren't first, but as I said, usually you are.
@maxjordan26253 ай бұрын
Weird to see the 850 trip up like that! I've had mine for a few years and beaten the shit out of it without so much as a hiccup!
@leewalker556317 күн бұрын
922 with 1/4 head
@glenarseneau12314 ай бұрын
Holy shit lol
@axemastersinc3269Ай бұрын
208 Ft Lbs
@dave38x4 ай бұрын
I have literally not once had an issue with a Dewalt 3 position switch in a tool that wasn't battered to hell in a decade.
@ToolsAndStuffOFFICIAL4 ай бұрын
You got lucky.
@lewisspurr916710 күн бұрын
@@ToolsAndStuffOFFICIAL Neither have i and ive been running it since i started working
@carlmcdonald58644 ай бұрын
I don't use DeWalt but if I was to pick one of the three the 850 is to clear winner sizes King the smaller the better
@ToolsAndStuffOFFICIAL4 ай бұрын
Except they are unreliable. When working properly they are a great little unit.
@Johndeere604 ай бұрын
@ToolsAndStuffOFFICIAL your the first I've heard of having this issue mabey it's more common but I know 6 diff guys that have them and no issues
@ToolsAndStuffOFFICIAL4 ай бұрын
A few people in the comments have the same issues. It is very common.
@iconr6racer2 ай бұрын
@@ToolsAndStuffOFFICIALis the 850 issue fixable? Im curious if for most people its the same thing that fails.
@BigInjun053 ай бұрын
Put it up against flex's best with their lithium pouch.
@b-man4433 ай бұрын
Had my DCF850 for a year and a half and it's never had any of those issues.
@dillongreaves94524 ай бұрын
My 850 sucks to it dose the same things it’s bullshit the should recall them
@jasonphillips38654 ай бұрын
Sorry. Not into Black and Decker 😮
@SamuelAguilar-pi4wi4 ай бұрын
Thank for the video from ca, USA! & any advice on choosing the least problematic impact driver? I was thinking m18 gen 4 trash same with dewalt
@ToolsAndStuffOFFICIAL4 ай бұрын
_If you've seen my channel, you should know the answer..._
@TheChico8684 ай бұрын
Milwaukee comparison
@hosainparchment56923 ай бұрын
Where can I buy this?
@대체.라고했다3 ай бұрын
Good Detail Show !!~~~
@sofjanmustopoh72324 ай бұрын
DCF 860 is hitting 180-200 foot pound real world ( spec 282 NM ) . Pretty sure all the Phillip head going to strip out . Only Torx , or Hex bolt would survive. Hex you can change car lug nut with it too .
@kizzjd95784 ай бұрын
Doubt anyone would be driving a phillips head screw in on max power though.
@sofjanmustopoh72324 ай бұрын
@@kizzjd9578 There will always be time when you have to take out old construction , and there will always be OLD phillip head screw to take out. you can bet your sweet batt pack on it. heck sometime there will be slotted wood screw to take out from a very old building.
@kizzjd95784 ай бұрын
@@sofjanmustopoh7232 yea i come across the old flathead 10-12g screws all the time unfortunately lol.
@OlegLitovchenko-t1d4 ай бұрын
Agreed !@@kizzjd9578
@Sgten014 ай бұрын
860 vs gen3 Milwaukee is a must at some point.
@ToolsAndStuffOFFICIAL4 ай бұрын
And surely gen 4
@Sgten014 ай бұрын
@@ToolsAndStuffOFFICIAL isn’t gen 3 more powerful than 4 for some odd reason?
@gregorsamsa13644 ай бұрын
@@Sgten01nope
@Sgten014 ай бұрын
@@gregorsamsa1364 pretty sure i seen VCG test it and gen 3 came out on top. But regardless maybe both versions can be included vs 860. I got dewalt everything but was gonna buy gen 3 after using mates one. Will most likely grab 860 at fielddays in a few weeks.
@gregorsamsa13644 ай бұрын
@Sgten01 gen 4 came out on top in their performance tests. But not by much, if I remember correctly
@robertcasey35284 ай бұрын
Bosch just released a new impact driver, they went from 210 Nm on the last one to 220 on the new version. They increase the power on each model by too small increments in my opinion.
@ClipsByMiles2 ай бұрын
I gave up on my 850 and bought an 860 - not because of the extra power, but just because of the useless mode 1 on the 850 that stops right when you want it to start impacting. Let me turn the stupid screw mode off! Thank god the 860 doesn't have it - it just gets straight to impacting.
@georgedavall94494 ай бұрын
W. O. W. Z. Z. E. R. !!!
@olgajoachimosmundsen46474 ай бұрын
Vs Milwaukee
@coreychristenson65004 ай бұрын
Damn
@lamdog244 ай бұрын
I've seen videos of the new AEG and that's a beast! Curious to see how they compare.
@keysautorepair60384 ай бұрын
So the 6 amp battery is better than the power stack?
@Vanman_fr4 ай бұрын
There must be an issue specifically with the Australian version of the dcf850 because I've never seen that issue here in america
@randythomas90524 ай бұрын
I was thinking the same thing, bought my 850 when it first came out and never had a single issue with it, and never heard of this problem till this video.
@robertdascoli9494 ай бұрын
13:50 I have a feeling this will smoke the competition.
@clintdurbin50814 ай бұрын
Only took dewalt 20 years to catch up
@thevillain81514 ай бұрын
Too bad Dewalt, already replaced you with Milwaukee, womp womp
@ToolsAndStuffOFFICIAL4 ай бұрын
Try this kzbin.info/www/bejne/qaOomoaaf9eAjJY
@ericnichols92754 ай бұрын
Need This New 860 for my KZbin channel i have 500 VIDEOS Planned
@Ender_Wiggin034 ай бұрын
Wish I could find one of these here in the USA, I'm still using the DCF787 that came with the Dewalt kit I bought couple years ago.
@olivermaskell62444 ай бұрын
Im still running my old 886, just had to change the hammer and chuck etc once or twice, couldnt really notice anything that made the 887 or 850 worth buying. This might've convinced me to finally upgrade😂
@keysautorepair60384 ай бұрын
My 850 does this same exact thing since day one.
@Jimmie-pk1pm4 ай бұрын
Do those have enough torque to do wheelbults on a car?
@ozyrob13 ай бұрын
I wouldn't trust it until you've thrashed it for a year.
@ToolsAndStuffOFFICIAL3 ай бұрын
I never expect a DeWalt to last a year.
@ozyrob13 ай бұрын
@@ToolsAndStuffOFFICIAL Wow, that puts them on the never buy one list for me. Thanks for the candour.
@axemastersinc3269Ай бұрын
Foot pounds...
@sduncle4 ай бұрын
can 860 uses double sided bits?
@bananazx4 ай бұрын
it depends on where it is released. For asia, double sided bits are standard.
@ToolTimeToday4 ай бұрын
i was going to get this dcf860 as soon as it came out, But quickly though naaa i'l wait with dewalts reputation in tatters because of the dcf850 and all of it's problem like you showed in this video demo. to yeah shall be eagerly awaiting your showdown video.....
@ToolsAndStuffOFFICIAL4 ай бұрын
Hopefully it survives all the tests I have lined up for it... but I won't be surprised if it doesn't.
@wearetheremnants16154 ай бұрын
Makita ftw. For overall reliability, adequate speed, adequate power
@ruddigger834 ай бұрын
So total tools was having a deal on Dewalt so I handed over some cash. In the kit picked up the DCF840. Ive been very impressed with it. Looking forward to what the others are like
@ToolsAndStuffOFFICIAL4 ай бұрын
The 860 leaves the 840 for dead.
@ruddigger834 ай бұрын
@@ToolsAndStuffOFFICIAL I also couldn’t pass up the kits as it came with a 5ah power stack.
@ToolsAndStuffOFFICIAL4 ай бұрын
@@ruddigger83 DeWalt sell kits at ridiculously cheap prices. Often cheaper to buy a kit than buy a stand alone battery. Their marketing is whack.
@simondodds79104 ай бұрын
@@ToolsAndStuffOFFICIAL does the chuck still flop around like crazy with a long extension bit in it like the 887?
@freddy2141Ай бұрын
OK DEWALTS AND MILWAUKEES I'M CARELESS FOR YOUR COLORS OR PRICE$$ AND POWER 🔋 JUST LETS GET THE JOB DONE ON TIME ⏲️ 💪🏼 AND GO HOME