“Tooty” air compressor by Spraygunner

Want your own NSAB merch? Head over to:
teespring.com/...
The merch store has been updated and now has the all new Evatos 1.5” enamel pins! Get yours along with a sticker abs help support what I do!
etsy.me/31Olw0w
I have said it many many times. Don’t be like me and skimp on important parts for your airbrushing needs.
What do I mean by this? Well, the compressor is the backbone of your airbrush setup. It’s what keeps you going and without it you wouldn’t be able to airbrush. Luckily an awesome company thought of this and that company is SprayGunner. They created their “NoName” brand of airbrush equipment that exceeds expectations.
This video covers their “Tooty” airbrush compressor.
You can find it here 👉 spraygunner.co...
Have a kit you want built by yourself truly? Well shoot me an email at [e-mail]
“notsoaverage” gets you 10% off your usagundam order
Notsoaveragebuilder is sponsored by usagundamstore.com, simpromodels, Arttystation.com ,Evan designs LED’s, and TurboDork paints!
Music by AUZZEEAST
SoundCloud.com/auzzeeeast
Discounts!!!!!
USAGS- notsoaverage (10% off your order)
Evan Designs- BUILD (18% off an order of $40 or more)
Turbodork- nsab10 (10% off your first order)
Arttystation- NSAB2020_10 (10% off)
Want your own NSAB merch? Head over to:
teespring.com/...
If you like the video give it a thumbs up!
Remember, don’t just be an average builder be a not so average one!
Products that I use:
Army painter brush set:amzn.to/2AopkJ3
Air Brush Kit: amzn.to/2AfG8Sz
Phone lens kit: amzn.to/2LE2DVx
Magnifying visor (not the one I used but will actually work: amzn.to/2LFbvud
Brush Soap: amzn.to/2EG4p84
Tamiya Extra Thin Cement: www.usagundams...
Sprue Cutter: https: www.usagundams...
Hobby Knife: www.usagundams...
Sanding Sticks: www.usagundams...
Micro Mesh: amzn.to/2Sg2iLm
Tamiya Masking Tape: www.usagundams...
Winsor & Newton size 1 brush: amzn.to/2EELIl7
Winsor & Newton Size 0 Brush: amzn.to/2Lvn6vN
Wet Pallet: amzn.to/2ByGl2X
Brush Soap: amzn.to/2EG4p84
Tamiya primers: www.usagundams...
Tamiya Paints:www.usagundams...
Vallejo Paints:www.usagundams...
Airbrush surface primers: www.usagundams...
Tamiya Scriber: www.usagundams...
Scribing tape: www.usagundams...
Pin Vise (not the one I use but a better kit: www.usagundams...
Tweezers set: www.usagundams...
-----------------------
Please subscribe to my channel:
/ @notsoaveragebuilder
---------------------------------------------------------------------
I am Social! Check me out on my other Social Media Channels:
►Facebook: / notsoaveragebuilder
►Instagram: / notsoaveragebuilder
►Patreon: / notsoaveragebuilder
---------------------------------------------------------------------
Please subscribe to my channel! I post videos, vlogs, more videos, reviews, and even more videos.
Please like, share, and subscribe!

[@SprayGunner]

Thank you for the detailed review! We appreciate your business!

[@simplekustomsbyeddiepapand1838]

Thanks spraygunner for a great products!!! Eddie @simple kustoms!!

[@cameronnoffs8349]

I bought a no name compressor from spray gunner a few years ago, and I have to say it’s a wonderful product.

[@simplekustomsbyeddiepapand1838]

Outstanding just pick one up for Christmas!! Thanks for sharing!!

[@DarksouIjah]

Literally just opened up my new one. Excited!

[@jorgelacayo8230]

Glad you did this video I was just looking into one since I’m borrowing my uncles super loud air compressor.

[@Homefree18]

I just ordered a no-name compressor, this is my first airbrush compressor and didn’t want to buy a real cheesy one, hopefully it will last me for years. Cool video, thanks for the info

[@NotSoAverageBuilder]

Hope you enjoy it!

[@DiecastMediaNetwork]

Nice review. I got lucky when my little compressor died I still have a 30 gallon twenty feet away in the garage and while it's ten times as loud as the little guy, I can go a few days between charges! Thanks for sharing.

[@istevens78]

Great review!! I have the No-name Master Blaster II compressor from spraygunner and I love it. Just one thing about your review: a 1/6 HP motor is smaller/less powerful than a 1/5 HP motor. That said, having a tank means it doesn't need to be as powerful since it doesn't have to constantly run.

[@NotSoAverageBuilder]

Thank you my friend! I have heard good things about their master blaster series. You know I work with fractions every single day at work and for some reason I had a brain fart with that one lol thank you for pointing that out ha ha at least I got the tank part right though.

[@frannyfranfrancis]

Great video! Honest review and solid advice! I started using Spray Gunner after watching some of videos. They are awesome company and they are located north of me in FL.

[@SprayGunner]

Thank you, we appreciate your business!

[@gerald1434]

Great video video as always. I just recrecently picked up a shop compressor to use instead. Works great and lasts a long time but its loud.

[@NotSoAverageBuilder]

Yeah they are freakin loud! And thank you my friend!

[@filip8985]

my first compressor was this junk one for $20, it was smaller than a mac mini, had no air storage tank and the pressure was awful, but i mainly got it to see whether airbrushing was something i wanted to continue in. When i upgraded to a slightly better airbrush i went ahead and dished out $100 on a compressor of the same design as this videos one, hoping i wouldnt have to upgrade in future. that was nearly 5 years ago and its still going strong. Id highly recommend getting one

[@NotSoAverageBuilder]

We all do it lol especially when first starting out. It’s scary spending serious money on something you don’t know if you’re gonna keep doing or not but once you make that mindset up it’s a great investment. That gives me much hope with the decision I made :)

[@Your_Average_Joe.]

Not sure if I agree with the No-Name compressor being better. I have Master Blaster Airbrush Compressor by NO-NAME Brand, and I'm not very happy with it. Previously I owned the "Tooty" and it froze up on me. I went to their shop in Florida. Oldsmar to rectify the issue, but the compressor broke, I paid the difference and was provided with Master Blaster. I have had this compressor for about two years, however, I used it a handful of times. Recently, I've started to airbrush again, and issues started. After I run the compressor for about 45min straight, it gets really hot and the motor starts to sputter, at which point it quits filling up the tank. I have to wait about 20-30 minutes before I can airbrush again. Not to say that Spraygunner has bad products they are a great and friendly group of guys, but their compressors are subpar.

[@NotSoAverageBuilder]

I completely understand where you’re coming from. Though there are a ton of factors that we need to look at, like what’s the ambient temp where you are spraying humidity etc. I just sprayed with mine for over an hour with 70° temps in my garage. But the humidity is around 40% in there so I don’t have much water build up in my tank, so I didn’t have much in my line that the in-line trap caught. The motor beginning to sputter after use could be an excess amount of humidity in the air which is then being amplified by the heat coming from the compressor. I’m not saying you didn’t get a potentially dud compressor but I have seen $300 compressors fail because they can’t handle the humidity around them especially when they get hot from use

[@shallah777]

How does the Tooty compare to the Master Airbrush II

[@NotSoAverageBuilder]

I’m not sure to be honest, I haven’t used the Airbrush 2

[@AngelOrtiz1]

all those compressors gets too hot and noisy on my experience at the end they will brake... "just one tip" make your owne one with a frige compressor and mind peace. and flow on your work. :D

[@ChrisDeger]

I like the no name stuff from stay gunner. Great tools, I know they are just re-badged Chinese machines and tools but they are still great 👍

[@NotSoAverageBuilder]

Yes! And I know they are too but they are tested by spraygunner so that makes me feel a little better about it ha ha

[@SprayGunner]

Thanks, Chris! "re-badged Chinese machines" is what sold by many other brands around the world and that's why we decided to call it "NO-NAME" instead of coming up with some cool name. It's branded as non-branded!

[@SprayGunner]

@@NotSoAverageBuilder yes, Sir! We started small, now they arrive by thousand and overall defect rate is less than 2% (super low for the Chinese manufacturer, it took us a lot of time to find a good one). But still, they all come "naked" and we test every single one while applying stickers on them.

[@ChrisDeger]

@@SprayGunner haha I love it, at least it gives me peace of mind knowing you guys have picked the best out of the plethora of machines sold and we will be getting quality stuff.

[@machinistmikethetinkerer4827]

@@SprayGunner I'm not a builder but a watchmaker and soon I'll be buying the Tooty for a new idea I've come up with as an alternative to the extremely expensive watch cleaning machines that are out there. I like the idea that you bring them in, run and inspect them before you sell them. That's about the next best thing to being made in the USA without the high price. Did my homework and you guys got the job.

[@jaxonv2098]

Can you just get the compressor and hook it up to a tank? I see they have a compressor in stock. It doesn't look like the same one but maybe it's a newer version

[@NotSoAverageBuilder]

You can essentially do that but you need something to keep it from just blasting out of the tank so that you can regulate it

[@TheGoKidd]

LOVE my Tooty!

[@xxnike0629xx]

I hear Iwata makes the best air compressor and air brush?

[@NotSoAverageBuilder]

I haven’t gotten to use either unfortunately, though I have heard a lot of good things about the eclipse and Neo series AB’s. The only compressors I have personally seen from them are the compact style.

[@rx-93nugundam20]

@xxnike629xx Man~ I hear you still refuse to build a kit again in favor of spamming _wishlists_ , hoarding *BOXES* , and firing some subtle shots against UC, Turn A and G-Reco stuffs? PS I hear you still refuse to break your silence about HGUC Xi Gundam *NOT* being a P-Bandai? huehuehue

[@PeterAgostiniJdcap26]

My no name tooty has a knocking sound now only a year old ?

[@sneakyfildy]

If it's ag-326 it should also have two fans

[@alfredo5249]

I have a question dose that compressor work with a husky air impact wrench?

[@NotSoAverageBuilder]

I mean any compressor can work with any air tool HOWEVER there isn’t enough reserve air in the tank to even remotely power it without the compressor running constantly. Which will cause extensive wear on the compressor itself.

[@NiricDigital]

Very nice review-- sound is the biggest issue for me if I was going to get a compressor so I can finally get into air brushing. So I appreciate you covering that! I see their site also has a "Master Blaster" compressor at only a $30 increase-- is it the same compressor but just with a metal case shroud?

[@NotSoAverageBuilder]

Thank you! I wanted to cover all the bases with this review because I know 100% how it is lol airbrushing is wonderful but some of the drawbacks can be discouraging. Especially the noise factor lol I’m sure there are some differences with the master blaster and the “tooty” I personally am not crazy about metal surround compressors. I have always found them to be noisier due to sound being bounced around in the case.

[@machinistmikethetinkerer4827]

@@NotSoAverageBuilder I can do without the case-extra weight and less friendly when it comes time for maintenance. Still nice tho lol

[@wykedinsanity]

been on my wishlist awhile need money 1st tho

[@aviaprad79]

поменял свой jas 1203 на этот мегакомпрессор,это просто небо и земля