Top 5 appearance mods for 1994-1998 sn95 Mustang

[@Gear1993Head]

1: PI swap if it's 96-98 2: Gt40 swap if it's 94-95 3: Wider rear wheels 4: Exhaust 5: LOWERING SPRINGS

[@lollis_garage3683]

Gear1993Head xxx I can definitely agree with all of those, thanks for comment and view 👍🏼

[@thatblackg8981]

What’s a PI swap?

[@anthonyjones8426]

​@@thatblackg8981 P71 motor

[@Mike-kz7sp]

Finally some up-to-date videos on a sn95 im going to be watching all the videos I may need some advice soon I'm doing a 94 myself

[@lollis_garage3683]

Mr smiles feel free to ask any questions you need, and thanks for the comment and support👍🏼

[@alehandrobonito9695]

What kind of exhaust would you recommend? I have a 98’ mustang GT

[@nvus6731]

I love those tail lights...I want to make mine sequential

[@lollis_garage3683]

Ms Muscle Car I like sequential tail lights a lot, I’m planning on doing it to mine as well

[@LAMPCRUSHER]

Same car as me and your videos are straight to the point... subscribed!

[@lollis_garage3683]

Alex Gibson I appreciate the support bro! 👍🏼

[@TheModAddict]

I agree to yours..cant wait to get new seats for mine.

[@lollis_garage3683]

HorsePlay Motoring thanks bro and yes seats make a humongous difference in overall driving experience. I don’t think lmr.com sell the sve s3 seats anymore though but didn’t you find some nice ones for a good deal?

[@TheModAddict]

@@lollis_garage3683 yes sir.. got some oyher issues to pan out..then ill be getting them.

[@dustinrussell5225]

Can’t wait to see more videos I’ve gotta 95 gt got a lot done to keep up the good work you make good videos

[@lollis_garage3683]

Dustin Russell I really appreciate that bro!! And I love the 95’s that’s what mine is and wouldn’t trade it for nothing. Thanks for the comment! 👍🏼👍🏼👍🏼

[@dustinrussell5225]

I’ve got a sound clip up if you wanna check it out I run the trick flow stage 1 cam

[@motivateNhustlee]

Keep posting bro 🙏🏽🙏🏽

[@SVTKeats]

Loving the wingless look!

[@lollis_garage3683]

SVT.Keats I appreciate that bro!!

[@nathanjenkins3584]

Headlights! Especially on the GTs where they’re always faded and yellow looking

[@lollis_garage3683]

Nathan Jenkins yes I didn’t even think of that dude!! They are always faded and look horrible. Thanks for the comment 👍🏼

[@nvus6731]

love your seats 🖤

[@lollis_garage3683]

Ms Muscle Car thank you very much! And thanks for the comment! 👍🏼

[@zombieslogic8390]

Bought my car in October but it sat at a friends for the most part until about a month ago. It came with BBK shorty headers and H-pipe with high flow cats. So I put those on first. Mods I bought were a BBK adjustable clutch cable and quadrant kit with firewall adjuster. MGW shifter is by far my fav mod so far. I just put koni yellows on the rear but I'm doing the water pump and timing chain and been waiting on parts and stuff so it's been a 2 week job :/ I also have a king cobra clutch to go in it but I want to order a billet steel flywheel to go with it, when my buddy pays me for my other car I'm selling him. Mines a cobra and completely agree with the cobra front bumper. Koni matching struts, and subframe connectors I hope to also get here soon when the car is sold, seats are horrid with that gangsta lean going on they gotta go

[@lollis_garage3683]

ZombiesLogic yes cobra bumper to me is a must even though it didn’t come on gt’s they just look so much better and sounds like you have a nice build going sir! Thanks for the comment and he support!! 👍🏼👍🏼

[@Emilyangel420]

its so cool we both have f150's and the same gen mustang my f150 is a 2014 f150 my 1996 mustang is a white 3.8 convertible thank you for the video very helpful especially with the website info thank you

[@1undrcustoms916]

Hey man I got a 97 sn95 myself with a few mods. Like the channel brother!!

[@lollis_garage3683]

Mike Dawson I appreciate that sir! 👍🏼 and as you can tell I’m a big sn95 fan lol

[@1undrcustoms916]

@@lollis_garage3683 yeah man I got the same wheels you do but my car has adjustable coilovers. Steeda intake and bbk big throttle body. Bassani x Pipe exhaust sub frame welded connectors 3.73 gears and a four point roll cage. I live in NC myself man if you want to get together sometime.

[@lollis_garage3683]

Mike Dawson I heard that man! Sounds like you have a nice SN, and maybe one day we could sir👍🏼

[@davidgross137]

- front coil overs with oversized sway bar. - cobra front bumper cover with one peace headlights. - strut tower bracing. - racing seats

[@Charlotte_Exotic_Spotter]

I’m 4 years late cause you got over 10k subs now 😅

[@CollideFan1]

I have the same type of wheels and tires setup except my rims are glossy black. You need wheel spacers in the back, brings out the rear tires for an aggressive look.

[@derekjones9418]

1. Replace front & Rear Lamps. 2. Wheels. 3. Front Bumper Cover 4. Hood 5. Window Quarter & Side Scoops.

[@tonycimaglia4390]

Subscribed. I have 1994 Mustang and my appearance mods are Wheels, Bullit interior accessories, and headlight covers

[@OrangeBoss-ww8eb]

have 94 gt 5.0 really like your content and amen to the people driving slow on onramp I bet 10 pet peves of drivers would get alot of likes, and you are right LMR better than AM, seems AM always have product out of stock of ships from there vendors with which they seem to have no control over eibach springs way to go better than motorsport

[@lollis_garage3683]

Orange12 Boss302 yeah so far LMR has been better. And yeah I have thought about doing a video on that just a funny type video lol! But I appreciate the support and the comment!👍🏼👍🏼

[@adamkuresa6607]

Ordered my springs from AM 2 months ago and I'm still waiting for them haha! I often shop with LMR as well though. I hate the Grave Digger look too. As far as seat fitment I'll need help since i'm 6'5, had to weld a metal bracket to get the seat to move back further.. Nice vid!

[@lollis_garage3683]

Adam Kuresa thanks bro and yeah I think I may try ordering different lowering springs to get the car lower than what it is now!

[@tjtaylor7864]

Thank you I'm buying a 97 tomorrow

[@lollis_garage3683]

Awesome bro hope you enjoy it! 🤟🏼

[@tjtaylor7864]

@@lollis_garage3683 yay!! It blew up 48 hours after I bought it. Shot a rod threw the side of the block!!!! Back to my 454 c10, I go...

[@derricknessmith5121]

Thanks for taking the time to put out these 94-98 Mustang's! I've got a 94 Cobra. I've owned 8 Mustang's! From the time I was 18 until now but I'm at 41 years old. BTW don't ever get old! It sucks 😂 but no seriously I just got this mustang Cobra from my buddy that works at a tow truck company. When it came in it had no windows no interior it just needed a lot of tlc! It's black in color. Which is only one of the three colors I believe they offered for the 94 cobra. They had the white, red, and black. Mine is black but I would have preferred red LOL And they only came in five-speed manuals. Still not quite sure why they did that? The most expensive model Mustang they have only comes with a manual? SMH.. I'm assuming maybe it was too halfway makeup for the pitiful extra horsepower that came with the cobra VS the GT in 94 😂 but that's just my halfway educated opinion lol. Maybe you can hit me back sometime just to chat for a minute. I could use a little bit of advice on where I should go with mine, considering I am absolutely living on a budget. But it runs great no problems with the transmission, strong clutch, just got an X-PIPE 🤙 In there! It still had the for factory catalytic converters on it. I'm waiting on my flowmaster 40 series mufflers to arrive so I can have them installed, and possibly go ahead and have tips put on it? I like tips that you have on yours. I know in one of your videos you listed which tips you had on yours but I've watched so many of your videos honestly I've lost track LOL if you could let me know where you got your Tips from, And what size they are? that would be fantastic!? I've already ordered a steeda short throw shifter for it. It needs just a little body work and they paint job. It has a BBK cold air intake on it. Since everything else is stuck on it I'm assuming it has the 308 gears? Would you go with 355's considering it's almost a stock moto,r or 373's? Keep the videos a coming! And I will share your videos with all of my Mustang buddies!

[@derricknessmith5121]

Om BTW I got a little off track. It has brand new interior in it now black carpet it's got some brand new cloth seats in it which I'm going to put two racing seats in the front and delete the back seat all together. Because it's not my daily driver like when I was 18 years old. Now I have two or three other cars to drive if I want. The Mustang is strictly for speed and competition! I do want it to look pristine as well! Also I will eventually be lowering it. Hopefully I can afford to call overs but I may have to just have to go with the lowering springs for now. I want to put heads, hey Cam and an intake on it but that's another thing I would appreciate it if you would help me out with? What heads Cam and intake should I start with? I'm sure it's a factory 302 block. Which will be rebuilt when my bolt on's make it turn loose!

[@Foxfloop]

@@derricknessmith5121I think the cobra was meant to be the “ultimate drivers mustang” And that meant a stick shift back then, I suppose.

[@hurtzz-lz5gl]

LOL. The way he said. Naw guys.. lolol

[@chrispaschal4332]

Just bought my 97 sn95 it’s cammed with a cold air intake upgraded fuel rails, fuel pump, and injectors it’s dyno tested at 360+ whp and it looks just like yours😂 I love my stang

[@shawnwright9538]

A cam and cold air intake will not take you to 360+..... no where near actually💀 maybe 250-270 on a good day💀

[@fredybeans2433]

Those numbers don’t make sense

[@elenor7736]

I subscribed cuz ..l got a 95 mustang gt 5.0 and l love this model..

[@lollis_garage3683]

Thanks for the support! 👍🏼

[@stevo7093]

mine got the cobra bonnet but normal bumper

[@edgarmaldonado5384]

The tail lights look nice. Paint or tint film?

[@willsmith8586]

If you're doing the front bumper, you're painting the front bumper, so that should include painting the car itself.

[@Re1ikGaming]

Think you passed the shop lol

[@lollis_garage3683]

Re1ik haha 😂 I was talking into the camera and when I passed it, I said to myself way to go dude you just passed the place you were going lol

[@TheModAddict]

Boy..if you dont put that damn seat belt on! 😬

[@lollis_garage3683]

HorsePlay Motoring lol but YOLO!!! I honestly always have it on but I just happen to not Remember that time. Haha 😆

[@CentralFloridaHipHop]

Im too broke to mod mine Lol

[@lollis_garage3683]

4o7KeV I know the feeling!!! I have to penny pinch to save for my mods lol Just keep grinding bro and stay focused you’ll get mods soon enough!! Thanks for the comment 👍🏼👍🏼

[@derekjones9418]

Me too. But I've saved hundreds shopping Marketplace & Junkyards.

[@tylerhartman7515]

What's the body kit

[@jdogi8781]

Did you delete your spoiler or was it when you got it? If so did you use plugs or?

[@lollis_garage3683]

Jdog I I had it done when I had the car painted, the body shop removed it and filled it for me.

[@elenor7736]

It's not her is him..

[@sierra5713]

I don't understand why they refer to the mustang cars as "her" either!... I guess they must think that the mustang horse is only a female and their is no male mustangs

[@madelinedemorato3965]

Take my advice on your #2 appearance mod to lower the front end. Don't do it! I bought my 95 GT 4 years ago. one of the previous owners lowered the front three inches and all it does is eat up the inside half of the tires. When I had the front tires replaced the tire shop told me the mechanics call lowered mustangs tire eaters. It causes the front tires to have negative camber. It's hard to get them lifted again too, most shops won't even touch it to lift it

[@lollis_garage3683]

I already lowered it but you have to get caster camber plates to compensate for the excess camber and I have my own shop with a alignment machine and my alignments good! 👍🏼

[@sincitysaint]

Steering wheel setup? Please!

[@lollis_garage3683]

It’s a momo competition wheels and hub kit.

[@tylerbalsley7146]

I bout a 98 get that was lowered on 2.5 springs it rides bad and front tires at the top lean on is their a way to fix that problem?

[@lollis_garage3683]

Caster camber plates should fix the camber issue you have

[@DroppedTK]

What did you use to fill the holes from the spoiler?

[@lollis_garage3683]

Had a body shop fill them in when the car got painted

[@cbcg_187]

I have a 1994 GT HO 302 boss it’s all based stock what cheap mods should I get for more hp

[@lollis_garage3683]

CBCG_1 id start off with bolt ons, id do cold air intake, throttle body, long tube headers and full exhaust which will be the most expensive mod but well worth it.

[@cbcg_187]

BustedKnuckleProduction awesome! thank you for responding I been watching all you video man and it’s helping a lot much appreciation👌🏾💯

[@calebbowen3949]

Yo what are those seats

[@lollis_garage3683]

They’re sve s3 seats I got mine from LMR.com but they don’t sell them anymore! So look at TMI.com and you can find them there

[@MiguelLopez-dx1zz]

Lmr pays u??

[@lollis_garage3683]

😂😂😂 no but I wish

[@lilmike2710]

First thing i did was ordered a set of those TMI seats BUT... I had to special order the passenger side seat a bit wider and more stuffing because all the ricers that I gap have fat girlfreinds and i need the extra support for their fat asses. Also has a heater in the passenger seat to keep my dinner warm, since i do eat @zz. The TMI satnds for "Too Much Intercourse".