Top 5 Must Have Milwaukee Impact Driver Accessories!

[@MachineryNation]

If you subscribe you could be in with a chance to win lots of prizes! In every new video we will be picking one lucky subscriber to win! All you need to do is comment on one of our videos and be a subscriber! GOOD LUCK!

[@Jasonhughes258]

Milwaukee for the win every time for me 💪 Congratulations John Rhodes 👏

[@MachineryNation]

Thank you Jason 🥳

[@masonryel1502]

M12!! Got to love them

[@MachineryNation]

Oh yeah!

[@BCF78]

I have a Mosch impact driver and would definitely love one of those angley knuckle chuck thingies. And I agree, a TX27 would come in handy!!

[@MachineryNation]

Mosch 😂😂

[@malnutriti0n157]

I need to get that 32 bit set! Thanks for giving these reviews!

[@MachineryNation]

We have them on our website 🤩

[@landonfricker5336]

I definitely agree. The T-27 should be included in the torx set. Nice, quick video

[@MachineryNation]

Thank you Landon 🥳

[@bartyparty8521]

Its in my bit sets

[@JakePlisskin12]

I always have to just make my own bit sets. At the moment I'm using 2 milwaukee bit set cases with six inch bits 3.5 inch bits 2 inch bits and all the 1 inch bits i could possibly need. Metric and sea allen bits. Security bits, every torx from 6 to 45, Phillips from ph000 to ph3 and for sure gotta have all sizes of flat head. Everyone hates on slotted even my self but they really save you sometimes.

[@catchacow1927]

Nice video James 👍🏻

[@MachineryNation]

Thank you Catcha 🤩

[@robertcourty9191]

Good video first time watcher I will watch more

[@MachineryNation]

Thank you Robert, I really appreciate your support 🤩

[@michaelmacdougal6016]

Got No. 1. Love it!

[@MachineryNation]

Awesome Michael 🤩

[@sheachapman5885]

Loving the videos

[@TheLawnmowerLady]

Playing with nuts, LOL! Actually the tool(s) I use most with my 1/4 impact are nut driver bits. Too bad they don't make a set (at least on this side of the pond) that includes a 1/2"-13mm nut driver.

[@MachineryNation]

I thought you might like that one Stella 😂😂

[@makrobins]

great video James , ive put my small order in

[@MachineryNation]

Mark thank you so much, we really appreciate your order. 🤩🥳😎

[@almclean4835]

Oh, some nice bits and pieces there. Like the 1/4 inch drive drill bits

[@MachineryNation]

They are proper. Thank you Al 😁

[@grahamhughes3953]

Love the red hex bits didn't know you sold individual bit to replace broken lost/stolen ones they're the best

[@MachineryNation]

Yes we keep a good stock of individual ones right up to 12mm 🤩

[@marksquirrell5785]

You must always be able to justify a Milwaukee wrench!

[@MachineryNation]

Haha, in a ideal world yes 🤩

[@jonathonlyles3349]

I love my Milwaukee tools

[@johnperks8307]

Nice drill bits

[@MachineryNation]

They really are 🥳

[@samchurch4022]

Have all 5 💪

[@MachineryNation]

Yes Sam 🤩

[@dannycopse8447]

Great video can't wait for another chainsaw restoration video

[@MachineryNation]

Nor can I haha 😇

[@benadam7446]

Never thought the knuckle would be any good but imma pick one up now👍👍👍

[@MachineryNation]

Awesome thank you Ben 😇

[@busaboy7]

Definitely need the t27 bit

[@MachineryNation]

100%

[@jeffwaldner9594]

I really like the drill bits going to buy a set

[@MachineryNation]

Thank you Jeff 👍🏼

[@edwardburke9181]

Some great kit there James but s you said t27 torqe bit a must

[@1069rtz]

Awesome video. Milwaukee fan for life!

[@MachineryNation]

Awesome Robert 🤩

[@billfarmer3952]

Great videos

[@MachineryNation]

Thank you Bill 😎

[@Aknightfwomtocwose]

Smashing!!

[@j.a.4360]

I'm glad that you plugged your website. I didn't know that you had one. I'll check it out Thank.

[@LastGeist]

I really like that torx bit kit might have to get one

[@vegeta9mon]

Will have to pick up the knuckle for the hard to reach spots on my jeep!

[@MachineryNation]

Good shout 👍🏼

[@BovverBoy]

I bought the bars and the right angle attachment and they are AMAZING! You guys are gonna make me go broke buying everything else 😂 loved this video. Keep up the good work.

[@MachineryNation]

Thank you Russell. Please keep adding to you collection 🥳

[@LiterallyJustBikes]

Wouldn’t be without my M18 FID2 😁

[@MachineryNation]

Awesome tool 🤩

[@JovaneChambers]

My favorite tools is milwaukee

[@MachineryNation]

Me too!

[@jakecoysh1032]

Will have to make a trip to the shop again soon!

[@MachineryNation]

Yes Josh! We will look forward to seeing you 👍🏼

[@86murph1]

I agree with this list

[@MachineryNation]

Thank you Murph 🥳

[@Exmoorbellringers]

It’s amazing you doing brilliant for the company better next time 😎

[@MachineryNation]

Thank you Andrew 👍🏼

[@ethanavalon3482]

Very helpful, I am a start up woodworker will be purchasing soon

[@andieconcarnie]

Yes I would agree with you on number 1. I have cheapies not the good one in your hand. Surprised my red impact has not eaten them alive. Well done on the vids guys

[@MachineryNation]

Thank you Andrew 🤩

[@scoott111]

Great video, definitely need to do a bit of purchasing 🤙🤙

[@MachineryNation]

Awesome Scott 😇

[@alrickhammar7420]

Nice picks

[@mr.t361]

I own 3 of these and didn even know it. LOL

[@MachineryNation]

Two more to go 😂

[@nathanzeigler6852]

Man I've gotta get those quick change extensions! Those would be handy. I have the knuckle, good stuff!

[@MachineryNation]

Thank you Nathan 🤩

[@AndyMcCorrie]

I like the idea of the knuckle might have to invest in one!

[@ionutm9991]

Great vieo

[@MachineryNation]

Thank you 😎

[@reddbeard2030]

Cool beans!

[@MachineryNation]

Prefer hot beans 😁

[@reddbeard2030]

@@MachineryNation So do I, but the breeze from this info cooled them down, lol.

[@StevesSmallEngineSaloon]

LMFAO! DeFault driver.... 🤣

[@MachineryNation]

😉

[@simonlunt353]

I am a big fan of Milwaukee l have the tools and the packouts all great l am a joiner by trade and so I do use my impact driver drill a lot but I am sorry to say but Milwaukee 1/4 hex pz2 are not not that good they are bad but I find wera bits are better and I do find having the 1/4 hex magnet bit better on my impact driver l did buy a full trend snappy set 20 years ago and yes I have replaced a few of them but to have a quick release choke for my Milwaukee drill is just great thanks for your help and video stay safe 👍

[@MachineryNation]

Thank you for your feedback Simon 🤩

[@ianfalconer533]

Just found ur channel and love it. Also I have Milwaukee tools I’m a joiner and love them. 😃🤙

[@MachineryNation]

Awesome thank you Ian 👍🏼

[@johnnyflukenberg]

Nice vids

[@MachineryNation]

Thank you Ionut 👍🏼

[@gmoney187]

nice

[@MachineryNation]

Thank you 👍🏼

[@tgsgardenmaintenance4627]

Can never have too many tools! As the M18 Milwaukee hatchet is about to be released, any chance of a good deal on the M12? 😁

[@roylewis2708]

Great ideas 😊

[@MachineryNation]

Thank you Roy 😀

[@acwvaleting3291]

Another good video and great selection of accessories. Just a side note, my name is Andy not John 😋

[@acwvaleting3291]

Also be interesting to see the m12 3/8 impact wrench VS impact driver with those adaptors

[@MachineryNation]

I like it 🤞🏼

[@MachineryNation]

Hahaha

[@the_bloke_that_cuts_the_grass]

Completely off topic but why are you mirrored? Today I am mostly using the yellow default impact driver but the nice red malarky one looks quite nice too😁🤣😂

[@MachineryNation]

Mirrored? No idea.. Marlarky 😂😂

[@markloveder3392]

Great video, how about magnetic bit holders.... 😀 👍

[@MachineryNation]

Yeah defo required 😎

[@DRJMF1]

Hi, do you have an accessory to convert a 3/4 inch wrench driver into a drill with a Chuck. Something like the dewalt DW2298 but designed for the Milwaukee 3/4 impact wrench ? Thanks. Then I can use the wrench to do joinery tasks as well as my car and scaffolding jobs, saves me buying a combindrill !!

[@kellyman92]

I have some of the red hex drill bits and really like them, I want to find a full set of them down to 2mm! Also love the square drive adapters so much cheaper than an impact wrench not that I need an excuse for new tools!

[@ashtreecare]

Nice little video again guys really enjoying them 👌 them impact bits number 1 I didn't get on with them went through 3 sets when I used to install palisade fencing breaking off the security nuts for the palisade uprights them bits really didn't like it just kept snapping them 😭😂

[@MachineryNation]

Thank you Jacob. Have you tried the Gen3 bits? They seem to be sticking it 👍🏼

[@ashtreecare]

@@MachineryNation I haven't yet since then I have brought the M12 impact wrench so I have been using that 👌

[@cusangrant7742]

Every time I put a drill bit in my Impact driver it snaps lol maybe I'm just bad at tools

[@MachineryNation]

Try the RedHex bits 👍🏼

[@cusangrant7742]

@@MachineryNation I’ll try em out thx

[@MachineryNation]

@@cusangrant7742 awesome 🤩

[@jasonaguilar6528]

Show me the money! 💰 😂

[@MachineryNation]

Show me the money 😂😂

[@jasonaguilar6528]

@@MachineryNation “oh no no no, say it like you mean it Jerry! “

[@andyhuckle]

how can I be "influenced" if weblinks to all top 5 are not in the description.?

[@MachineryNation]

Sorry they are not listed individually. There is a link to our accessories page though 🤩

[@christianmarineau8079]

I would love to see you include the part numbers so we can search these things a bit easier. Searching for torx bit sets brings up tons of different things

[@mr1pearl]

Playing with nuts is my usual thing have you been peeking ? 😆 and of course I'm 69 on the thumbs up what what 👏👏

[@MachineryNation]

Thank you Bill, we already guessed this 😂

[@lukelattymer2962]

I own all these accessories except for the knuckle but I would never buy that it's way too bulky and it would have a hard time getting around corners.

[@tonyst.pierre7132]

We cant get #3 here in Canada :( do you ship?

[@OliThaTwist]

I have the Makyta, Milwowkee, Ryoobi, Basch, and Do Wolt.

[@andyjame6835]

I used kzbin.infoUgkx4ynqaujg7rZKFapA8s29kTpRszJGa3-K this for the first time today to replace the front wheel bearing on my rwd 98 dodge dakota. This had absolutely no issue removing or reinstalling the lug nuts and it took off the axle nut without any struggle. Sounds like it's got some muscle to it. Time will tell

[@si_laysconstruction]

Giveawayyyyyy

[@adamdubec6283]

MiTable huh...

[@khingcortez8338]

i hope i win mann

[@jazpala1264]

Pick me !

[@MachineryNation]

I pick you 🤩

[@DeadDollar1]

Drill bits, really??? Who would own a driver without bits???

[@saiiiiiii1]

Hence the must have. Definitely not clickbait 😂

[@karlwoolhouse4826]

De-fault😂😂😂

[@MachineryNation]

Loves it 🤩

[@ethandobney9728]

Hi I want to win plz

[@Maggen-official]

Pliss give me❤

[@masturone8257]

Amazing how everything u advertise you have a family member who has and loves them. What’s next everyone happens to have the same birthday as the guy who founded miluakee. Just advertise the product don’t lie and lose credibility

[@spencerhailee9175]

𝔭𝔯𝔬𝔪𝔬𝔰𝔪 😥

[@BrettSucks]

This is a comment

[@MachineryNation]

It certainly is 🤩

[@elijahbierbrauer9866]

Great video

[@Big_Johns]

Looks like all 5 are winners James, the nuts will be happy!! 🙂👍

[@MachineryNation]

Can’t beat a bag of nuts.. well you can but wouldn’t advise 😂

[@joshuathomas3060]

Just purchased a Milwaukee impact do I need Milwaukee bits for it or can I just get any kind? Thanks

[@MachineryNation]

Of course I’m going to say only Milwaukee 😉 no you can use any 1/4 inch bits. But get good ones as cheap ones are a waste of time.

[@fixitorstripitGardenmachines]

Congrats John. Some great accessories there.

[@MachineryNation]

Thank you Neil 🤩

[@user-fc2uj1jl7m]

Nice video and agree to it. Only Milwaukee for me since I first used them.

[@MachineryNation]

Yeah Dot, we love them 😂

[@theando197]

How’s the knuckle compared to the right angle mate?

[@MachineryNation]

The knuckle is of a much stronger build but is not as good an angle as the right angle. Personally you need both 😁

[@DJ-SPARKY-REACH-ON-AIR]

Impact Driver Accessories is a must for all and keep spear in the tool box

[@MachineryNation]

Complete agree Sparky 🤩

[@grasscutterpalmer3746]

I don't have a impact driver otherwise I would use them

[@MachineryNation]

You need to sort that out Tim 😂

[@simonp3352]

Cool tools I like that I have the fid2 it is the best impact driver

[@MachineryNation]

Agreed ✋🏼

[@ericvinge5130]

Dewalt has a nice right angle set, Milwaukee should make one as well

[@MachineryNation]

Default? 😉

[@ericvinge5130]

@@MachineryNation I’m a Milwaukee fan through and through but others have some cool tools that I can’t look pass, wish they could make everything I would love to see a ratcheting tube bender tbh

[@Ann-kr6mj]

Great voice & information, please do me/us woman who maybe older then you lol please put a pack together for us , drill, impact, accessories to go with , hubby not well so can’t do all the jobs he used to but I can’t use his tools as to heavy ( shhh but I don’t feel 76 on 4/1/2023 lol😊

[@rusted2rollin760]

Hand tools hand tools hand tools

[@MachineryNation]

Power Tools Power tools power tools 😂

[@HobbyMotorDK]

Hex drill set are just the best invention ever. Great video as always Hayes & Co

[@25Nightops]

That knuckle looks like it works straight, or angled, like a U-joint for ratchets. Time to make room in my bags for a new piece of kit.

[@fredfidel8373]

Cant touch this 🎉 Milwaukee 💪🏾

[@paulmcwilliams6730]

My name Paul mcwilliams and I went Milwaukee pack out crazy

[@DJC995]

Nice one I have been using Milwaukee PZ2 bits for years Thanks again

[@MachineryNation]

They are pretty awesome hey 🤩

[@mustbefamousjr4888]

The milwaukee bits are really nice I've definitely pushed them harder then they are rated

[@MachineryNation]

They are pretty awesome 🤩

[@rebel280z]

I have been looking for a security bit set and had no idea my favorite brand had any. 32 bit set here I come!

[@MachineryNation]

Awesome Jeremy 😁

[@johnrhodes7487]

Love my right angle drive great for taking off wheel arch liners without taking of the wheels. Many thanks for the prizes chaps 🇬🇧

[@MachineryNation]

Thank you John and congrats 😎

[@paulkelley7445]

USA sc

[@MachineryNation]

👍🏼

[@samuelhorowitz5029PLUMBCRAZY]

Never won a thing in my whole life.. and I'm 51 year old service plumber.

[@6ixGudda]

Poor you 😢

[@ProjectMan]

The knuckle bit looks handy 👍🏻

[@MachineryNation]

It has proven very popular. Thank you Gary 😀