Top 5 scroll saw projects to make money

[@micahdavis214]

The pendants are lovely 😊

[@DailovespoonsThomas]

Thanks Micah, glad you like them. Thanks again for supporting our KZbin channel. All the very best from us all. 👍

[@MartyRaaymakers]

Great vid with great ideas. Thanks

[@DailovespoonsThomas]

Glad you enjoyed the video Marty Hope all is well with you. Thanks again for supporting our KZbin channel. All the very best from us all. 👍👍

[@peterclifton7069]

Lovely as always. Thanks

[@DailovespoonsThomas]

Thanks Peter, your support is always very much appreciated. Hope all is well with you, all the very best from us all. 👍👍

[@michaelmarchione3408]

I can see were they would sell for you. Nice work! Take care!

[@DailovespoonsThomas]

Thanks Michael, I find the simple projects are often the ones that sell the best for us. Hope all is well with you, take care, all the very best from us all. 👍👍

[@GabiFodorrasRO]

Friend you are very talented

[@DailovespoonsThomas]

Thanks Gabi, your support is always very much appreciated. Hope all is well with you. All the very best from us all. 👍👍

[@woodys_woodwork]

Hi can you recommend a blade for cutting 8mm clear acrylic sheet?

[@DailovespoonsThomas]

Hi, Great to hear from you. Not something I have done before. I would suggest a less aggressive blade than the one I normally use. So a lower number for example a number 5 blade. A Niqua Pebecco might be more suitable because it is less aggressive than the Niqua Speed. I have attached a link below to the blade I would try myself. Might come down to a bit of trial and error though!! en.niqua-shop.de/collections/51-holzlaubsageblatter/products/holzlaubsageblatter-pebecoreverse?variant=35487281086619 Hope it does the job, thanks again for supporting our KZbin channel. All the very best from us all. 👍

[@mendiyaa8735]

Super 👍

[@DailovespoonsThomas]

Thank you, glad you like the video. Many of the designs are available on our website to be used for free. I have attached a link below for you. www.thelovespoonworkshop.com/scroll-saw-projects/ Thank you for supporting our KZbin channel. All the best from us all. 👍👍

[@teambutingting7759]

subscriber here sir.what type and size of blade are you using tnx

[@DailovespoonsThomas]

Hi, great to hear from you. I work with a Niqua speed number 9 reverse tooth blade. Works great for the work I do. I have attached a link below for you. en.niqua-shop.de/collections/51-holzlaubsageblatter/products/holzlaubsageblatter-niqua-speed?variant=35483684569243 Pegas do their own version of the same blade and in the USA for example it is the Flying Dutchman blade. If you go for the Niqua speed blade make sure it is Niqua speed you get because they make lots of different ones and some are vastly inferior to work with. Thanks again for supporting our KZbin channel. All the very best from us all. 👍👍

[@МотяМуркевич]

Какое дерево Вы используете?

[@DailovespoonsThomas]

We use all sorts of different wood. Alot is recycled from old furniture and things like window frames. Oak is the most popular wood we use but we also work in Teak, Mahogany, fruit wood, Juniper, Yew, Ash, Sycamore. Whatever we can get hold of. Thanks again for supporting our KZbin channel. All the very best from us all. 👍👍

[@thesmokedeck]

Excellent work sir! Wonderful examples in this one, especially the pendants

[@DailovespoonsThomas]

Thank you, hope all is well with you all. All the very best from us all. 👍👍

[@МотяМуркевич]

Добрый день. Очень красиво. Подскажите пожалуйста чем покрываете изделия. Каким воском? Благодарю

[@DailovespoonsThomas]

Hi, great to hear from you. The finish we use is shellac sanding sealer. I have attached a link below to the one we use ourselves. We apply three coats. Sanding down the wood between each coat. fiddes.co.uk/shop/wood-finishes/shellac-polish/shellac-sealer/ Thanks again for supporting our KZbin channel. All the very best from us all. 👍👍

[@sandraclark8413]

I have trouble figuring prices.

[@DailovespoonsThomas]

Pricing is always a challenge. Never seems to get any easier and it's usually underestimating the time involved in making an item.🤣

[@unlimitedj06]

👏🏽👏🏽👏🏽👏🏽👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽

[@DailovespoonsThomas]

Hope the video was useful. Thanks for supporting our KZbin channel. All the very best from us all. 👍