Top 8 Ways to Use RX 8 for Music Production | iZotope

[@kozykev]

So basically you're telling me you can finally rip Acapella's from songs without the original stems??? Been waiting for this my whole life ...

[@DeyBwah]

That's crazy... straight pulled the vocals out of the track.. amazing

[@greateralexander]

Gotta give props to Jeff Manchester of Manchester music for the overview lesson. I know that voice well.

[@kennethward9976]

I have asked one of your tech guys how to remove the clicking sound and what he showed me is better than what I hear from your videos. THANK YOU FOR YOUR PEOPLE!!!!!!!!!!!! THEY KNOW WHAT THEY ARE DOING. PEOPLE TRUST THEM. THEY KNOW

[@misterjaroslav6859]

Great! Recording from the multitrack device. How to add 2 additional tracks in "Channel Routing - Recording Input Configuration"? Thank you!

[@Gongtopia]

I recently did a remix where I pulled the vocals out of a stereo mix. I then used just the vocals with an all new instrumental backing and it's amazing! Well done Izotope!

[@ReynaldoIvanPena]

For some reason, I don’t see guitar de-noise in my RX 8, I have the elements version from the holiday platinum bundle

[@ElectricFarmerCh]

Holy crap! I wrote a few tracks for a publishing company last year and I must have done 100 takes, not because of my performance but because of the static sounds the electrics in my guitar were producing! I didn't have money or time to get my guitar cleaned up. This would have saved me a whole lot of takes!

[@bboymac84]

This!!! This is why Izotope is the best!!!!!! No one can compete with Izotope!!! ....Nobody!!!

[@mirianvernacci]

Hi guys from iZotope, would you mind captioning the video for the deaf?

[@XDosShane]

Any plans for ARA?

[@ThaUnspokenTruth]

Your products drastically improve my work. Keep being innovative

[@deemus133]

How can I adjust the volume of a specific frequency using the laso tool?

[@Mistheria]

Amazing as always!

[@AngelWest58]

holy cow. Never thought it possible

[@JonHortonMusic]

Hey guys, I have a problem that I think only your software can solve. I recorded a live stereo track of guitar chord strumming and solo vocals... OUTSIDE with SEVERAL ambient bleed-ins from cicadas. It was a fun morning session, but the cicadas are WAY too loud and they only pop in and out here and there with these crescendos and decrescendos. I think I tried fixing it with your software's trial mode, but I don't think I'm experienced enough to actually do this well. I'm probably going to buy the full version for other reasons, but will the software help isolate the guitar and vocals so I can bring them out above these terrible sounds?

[@Billthebott]

how do you open it in the daw?

[@HappyMixingStudio]

超厲害的黑科技!!!

[@theheerdt]

Whats the song that you use the WOW on?

[@GatotAlindo]

just in case you want to restore vaporwave music :P

[@theheerdt]

@@GatotAlindo do you know the song?

[@renzo4180]

How do you open it as a standalone after downloading? I'm only seeing the VST version

[@MixingGBP]

Go to the folder where the install placed the program. Look for the executable file there. I'm in Windows, so I just moved a shortcut to my toolbar for quick launching.

[@kaderraimusicprodbenzouak6140]

Bravo pour ce logiciel

[@mullewap6670]

Wow!

[@arturochavero6478]

will this work on arm MacBook ?

[@stuhrjames]

Can the Amp de-noise module be used in real-time?

[@jompkins]

Short answer: no. Long answer: it's possible but not simple, and increased latency seems likely to finish off whatever dreams you had for this idea. One day I pray it will be possible! Let it come sooner than later.

[@stuhrjames]

@@jompkins my/your prayers may have been answered. Downloaded the Brusfri plugin from Klevgrand. Real time noise suppression, no latency, and almost no cpu load. Using in Ableton Live with amazing results so far.

[@jompkins]

@@stuhrjames Wow! Great to hear thanks for sharing.

[@powermix24]

Game Changer!

[@TheShpmusic]

All this excitement and great progress, but still no "AUTO EQ...Revised Neurton and upgrade a "AUTO EQ" on the masking section..how hard is that!! Next product release from IZOTOPE let it be an "AUTO EQ"..👀

[@synthwaver6495]

Probably in N4.

[@feelingevaporated2912]

Why expect a Neutron feature in an RX revision?

[@synthwaver6495]

@@feelingevaporated2912 I was under the impression he was talking about Neutron to begin with.

[@DigitoralMediaProd]

Hi, I do interviews and often fight background noise. Do you have a product that can remove background noise from vocals if it’s speech not singing? Thank you

[@wentthere4736]

Hell yes

[@studiomedia-arttomaszzbore1251]

Well, impressive ! Thanks :)

[@pica3861]

It’s so Crazy!!!

[@RockinJohnnyaitken]

Its misleading I bought RX elements thinking I could use the music rebalance feature and now I find out you have to buy a different version?

[@Christian-eq7uh]

How do I import my logic individual tracks into this standalone though? I can't find any video of this.

[@jeremyfonseca77]

I just go to my audio files folder and drag files striaght into rx. Do my corrections and render. Close logic and reopen it and the files are all updated

[@arfian8687]

great software, but for my ears sound got muddy after processing

[@dafingaz]

Nice!

[@ruifangtfc]

这么好

[@therealjackfisher]

Ree-Lee? Aj need dat!

[@cristiantoro3608]

Quiero tenerla!

[@oldskoolfunkandsoul1]

which modules are in elements version or advanced version??

[@ManchesterMusic]

Comparison chart: www.izotope.com/en/products/rx/features.html#compare

[@cesargonzalezbueno3359]

doesn't this program reduce the audio quality of the recording, is it just me or is it something that actually happens?

[@FRIDAY.2030]

🧡💛💚❤💙💜

[@shubho3299]

haha money goes brrrrrrrr

[@engeomusic]

Yo Izotope, what use is a trial of RX8 if you can't save anything? Infuriating

[@RodneyD]

Do you have a hardware sampler??

[@stephenjohnstone9940]

Cock tease! lol

[@RodneyD]

stephen johnstone You get it fam😂😂😂

[@keiths.heather8661]

So owners of rx7 who paid hundreds of dollars for license need to pay agian in order getting rx8...? Such uncomfortable to be izotope customer. It's really unfair. Better get along without it.

[@nobodyhome3753]

I think you know what has to be done...

[@keiths.heather8661]

@@nobodyhome3753 what you mean...?

[@DeejayWilly]

@@keiths.heather8661 i think you know what he know that has to be done .......

[@DeejayWilly]

@@keiths.heather8661 exactly mate exactly 😉

[@meh11235]

I did Komplete 12 and that afternoon,...13 announced go figure... I bit the bullet on RX8, I'm stunned.. a lot of cool features with the AI operating at such high sampling freqs

[@sharpen-up]

WITCHCRAFT!

[@Wendel_Kos]

Ow, and they forgot to mention that this is only with the 'advanced' version....which is 650 euro. For this money i can hire a writer/singer, a producer and a mix engineer, and have spare change to go to a bar, get shit faced drunk and act surprised when my song plays on the radio in that same bar...

[@COVID--bi7rl]

Ok do it then

[@ShellacScrubber]

Being an audio restoration engineer, I'm all for tools that remove noise and problems caused by bad earthing or imperfections inherent in the recording media, but what on earth is the goal here? To make the music sound as processed and as unnatural as possible? This recent obsession with removing all the idiosyncrasies that make musicians sound human, is just getting silly.

[@isaiascastro8821]

Easy, just don't use it.

[@ShellacScrubber]

@@isaiascastro8821 Yeah, but the rant was more to do with this silly new trend rather than the tools themselves. I just find it a little sad that current recording and post production techniques often seem to be moving further and further away from preserving the fidelity of the original recording.

[@isaiascastro8821]

@@ShellacScrubber I know what you mean and I get where you come from, but behind the desk you don't always get to work with the best performers out there, so I see this tool as a great way to polish those poor skilled performances.

[@danji9485]

@@isaiascastro8821 I mean... I guess, but in that case wouldn't this become more a crutch?

[@isaiascastro8821]

@@danji9485 for the artist maybe.