Top Thread Getting Caught in the Bobbin of Industrial Sewing Machine

Here is the video of the problem that I had • Sewing Machine Problem...

[@LS-cs9rq]

It's fun to see the pre-oil tanker Mariusz.

[@kristinel1117]

I cannot begin to thank you for posting this video. I bought a industrial machine recently and the upper thread kept getting caught in the bobbin case. I've been trying to figure out the problem all day. Now I know I just need to raise the needle before I pull the fabric away. Thank you again.

[@alexishigdon8465]

I'm not having the problem you are fixing, but you made a really informational, visually perfect and simple to follow video. thank you.

[@michellemarostica9057]

Helped me just now! I'm using a home sewing machine and was having the same issue, tried your solution and that fixed it. Thank you!

[@maryjanepartlow7267]

I am a newbie and my machine has been doing this and is soooo aggravating. I would have three and sometimes 4 strings coming out. I thought it was a problem with the machine but thank you thank you thank you!!!

[@maripeltonen3195]

So helpful, I just got a new machine and this exact problem appeared and I was so disappointed and thought I'd have to take it to be repaired! Thank you!

[@tomness6337]

Thanks a lot this helped tremendously I’ve been spending at least four hours in the middle of the night trying to figure this out

[@jayandsue1318]

Thank you for this!! I am new to sewing and I couldn't figure out why, on my regular sewing machine, why the thread was getting caught in the bobbin! It was so frustrating. I thought it was broken and I would have to take it in for repair. This totally fixed it!! Thank you! 😊

[@spiderlovesbeerohyeah4760]

Oh man. Thank you so much. I didn’t even think if this. I just tried it right now and yup, that was the problem. Hahahahaha. I’ve been adjusting the tension on the topside and the bobbin for 2 days. Your video is a lifesaver. I would’ve kept adjusting tension for the rest of my life. My Pfaff 130 is perfect now.

[@adimuntean71]

well, this is one of the first things i learned about sewing with a machine. Take your material off ONLY when the cycle it's finished-needle up and thread upper carrier up, too.It's a basic thing. Glad you found it too, hard way, but shure you'll remember better this way. Cheers.

[@spiderlovesbeerohyeah4760]

How can you tell from the top??? Or do I just have to look at the bobbin every time I’m done???

[@adimuntean71]

@@spiderlovesbeerohyeah4760 Of course not. Needle in uppward position and the thread lever (who moves up and down), also in the upper position.

[@spiderlovesbeerohyeah4760]

Oh I see now. Sweet...... thanx

[@karlybyrd1551]

Dude, I've been sewing a project now half way through this has started being an issue. Thank you SO much because I couldn't figure out the problem to save my life, but this turned out to be it!! I must have just been getting lucky with the direction my needle was going along?? Idk but thank you!!

[@dianagutierrez9091]

You sir... deserve a Medal of Honor!! I was about to the row my machine out the window! THANK YIU THANK YOU THANK YOU!

[@camillea2333]

This was driving me mental on my old 320K today. Thanks for fixing!

[@MARYANNE269]

This is the simular as normal machines,but you have to have the needle raised at the highest point, for the material to come away smoothly. It's good to know.

[@melini2001]

I don't have an industrial machine but the fix is the same. Thank you so much!

[@ChristinaFiamma]

Oh my gosh, THANK YOU! I was ready to throw my machine out the window! This totally works!

[@lorellmonzon]

I can't thank you enough! Saved me so much time and money, you're a life saver

[@elliebwalker]

you literally fixed my problem entirely thank you so much!

[@SkoniecznyMariusz]

When I was experiencing this problem, I thought I was going to pull my hair out. I called the dealer and they could not solve my problem. So when I finally solved it by learning how the sewing machines work, I knew I had to make a video about it to help others. So I am very glad that I was able to help you.

[@Kashlique]

Same problem today i kinda figured it out but i still thought something was wrong with my machine. Then i saw this video.

[@angiez8395]

Thank you! I have been having the same issue and could not figure out why.

[@mxgman]

Thank You, This made the lightbulb go on.... :)

[@HoneyBee-bi8fy]

I always have this problemm thankyou!

[@garyviney790]

OMG, thank you!! I was literally going to self-combust!!!!

[@jasminecustombags]

OMG thank you so much. I've tried everything. You saved me from some therapy :)

[@michaelages5735]

Awesome thanks. This problem was such a headache. And it was great to see the thread pulling around there. I didn't actually know what was going on down there until seeing this.

[@Daily4Jesus]

So helpful..Thank you.

[@elliebwalker]

this is so helpful!!

[@alexandrastone9977]

Thank yoU!

[@trafficjam.]

This worked, thx😊

[@SkoniecznyMariusz]

You're welcome!