Рет қаралды 8,542
For today’s how to video, we demonstrate several different ways to cut holes onto a part using PathPilot’s conversational mode, and an end mill. Jason first starts out with a circular pocketing routine, then he goes on to a thread milling cycle. Finally, he ends with a pocket perimeter to clean up the hole.
Interested in a Tormach machine? Schedule a call with one of our team members at hubs.ly/Q029gf-H0 and they will be happy to answer any questions you have.
Be sure to subscribe for updates on everything Tormach: goo.gl/sWeCs7
Join the Tormach Forums here: hubs.ly/Q029ggRV0
There are several ways to contact Tormach Technical Support.
If you want technical support, please follow these instructions to open a support ticket: hubs.ly/Q029ghcD0
Tormach Technical Support page: hubs.ly/Q029ghwW0
Tormach Technical Support contact: tormach.atlassian.net/service...
About Us: At Tormach, we're dedicated to providing exceptionally engineered products, technical support, and customer service at the lowest possible cost. Our focus is to help you realize your CNC goals through tools and resources that transform your concepts into real products. Connect with us:
Visit our website: hubs.ly/Q029gj8M0
Facebook: / tormach
Instagram: / tormach
Twitter: / tormach
LinkedIn: / tormach