Toro Personal Pace freshening up and a slightly bent shaft

  Рет қаралды 7,263

Ellis Mowers and More

Ellis Mowers and More

Күн бұрын

Пікірлер: 21
@cherokeefiddler
@cherokeefiddler 5 жыл бұрын
First blade clutch I have seen on a Toro/Briggs. You are brave to video your first attempt. A good Memorial Day weekend got me up to 55 but with this drought, I expect things will slow down quickly. Thanks for showing us the Toro fix.
@EllisMowersandmore
@EllisMowersandmore 5 жыл бұрын
Yes I rarely get Toros in that are this new. Had one with the knockoff Honda earlier in the year but no blade clutch. Luckily I got all the ones I had sold before the dry weather. Wow 55 mowers, you have me beat! I'm in the 51-52 range but hoping for some rain so I can get this one gone.
@themowerman
@themowerman 5 жыл бұрын
Good fix mate and that drive is fast
@EllisMowersandmore
@EllisMowersandmore 5 жыл бұрын
Yes it is, you can almost run behind this mower it's so fast!
@pattayperformance
@pattayperformance 4 жыл бұрын
THANK YOU FOR POSTING THIS VIDEO! I was in the middle of replacing the clutch cable and forgot how to put it back together. In stead of watching my video that I just recored...watched yours LMMMAAAOOO
@EllisMowersandmore
@EllisMowersandmore 4 жыл бұрын
You're welcome, whatever helps and is easier! Glad to be of help!
@bronzechicken4437
@bronzechicken4437 5 жыл бұрын
I've got one of these, bought it special to have for myself, 20332, I LOVE the mower too, of course if it'd rain so I could use it.
@EllisMowersandmore
@EllisMowersandmore 5 жыл бұрын
I have considered keeping one of these but have no need for it. These are my favorite consumer grade mowers. Thankfully I got my customer returns all sold in time before the dry weather came.
@Mr_Tecumseh
@Mr_Tecumseh 5 жыл бұрын
The spin stop on the new models is built cheap. I had a Toro from the 90's with a spin stop that I took apart, it was massively overbuilt with about 3x more parts and I remember a 1/8 inch thick plate that was about 4x4 wide under it too in addition to the round one this one has. Still have those parts layong around, doubt anyone would ever need them, they probably never broke.
@EllisMowersandmore
@EllisMowersandmore 5 жыл бұрын
I had an older one like you were talking about that the spin stop had frozen up from where it sat outside and got badly abused but I remember how beefy they were built and you're right much better. I was surprised at how little there is to these newer clutches.
@The_GreenMachine
@The_GreenMachine 11 күн бұрын
how do you remove the 7/8 nut without the shaft rotating the engine, is there some sort of brake i need to apply on the engine to get the shaft from rotating??
@EllisMowersandmore
@EllisMowersandmore 10 күн бұрын
It is best to have an impact driver. Sometimes putting pull rope into the spark plug hole will stop the engine and allow you to break the bolt free if you don't have an impact.
@ronthomas5513
@ronthomas5513 3 жыл бұрын
You have two belts showing in your video. Where does the longer belt (v-belt) rest underneath the mower? There doesn't appear to be a groove like where the shorter belt is. I'm currently replacing the longer belt and I can't tell where it goes underneath the mower. Your video is the closest I've seen to figuring it out.
@EllisMowersandmore
@EllisMowersandmore 3 жыл бұрын
I've long since got rid of this mower but I'm guessing you're talking about the self propel belt. To my knowledge you have to take off the blade clutch to access it and remove it. Once you do that you should be able to see how it is routed a little better.
@jayandriot6454
@jayandriot6454 3 жыл бұрын
I know this is a late reply but the pulley for the drive belt is under the second clutch plate.
@IlPiratadelrisparmio
@IlPiratadelrisparmio 7 ай бұрын
in europe this model il wide use. did you block the flyweel to unscrew the bolt on clutch disk?
@EllisMowersandmore
@EllisMowersandmore 7 ай бұрын
I just used an impact gun to take it off.
@frankg507
@frankg507 3 жыл бұрын
Is this something any mower repair shop would be able to do? Im having the same issues with mine it still vibrates even with the blade turned off and it actually seems to vibrate a little more with the blade off then on. Honestly I would probably mess it up even more if i attempted to try and repair by myself lol
@EllisMowersandmore
@EllisMowersandmore 3 жыл бұрын
It really depends on the shop. Many won't touch it for liability reasons and will try to sell you a new crankshaft which would cost more than the mower is worth. I don't hesitate to do it as seen in the video. It's a $200 push mower not the space shuttle as Taryl would say!
@BrucesShop
@BrucesShop 5 жыл бұрын
Red mowers always seem t come out great. LOL
@EllisMowersandmore
@EllisMowersandmore 5 жыл бұрын
You're right Bruce, everybody seems to like a shiny red mower!
Toro Recycler Blade Clutch Replacement
15:53
J's Speed Shop
Рет қаралды 15 М.
Straighten A Bent Lawn Mower Crankshaft With A Pipe
8:44
Steve's Small Engine Saloon
Рет қаралды 271 М.
Real Man relocate to Remote Controlled Car 👨🏻➡️🚙🕹️ #builderc
00:24
Hoodie gets wicked makeover! 😲
00:47
Justin Flom
Рет қаралды 131 МЛН
Кто круче, как думаешь?
00:44
МЯТНАЯ ФАНТА
Рет қаралды 5 МЛН
When Cucumbers Meet PVC Pipe The Results Are Wild! 🤭
00:44
Crafty Buddy
Рет қаралды 56 МЛН
Minecraft Launcher es un desastre...
9:50
Itssy
Рет қаралды 124
Toro TimeMaster Adjusting Trasmission Tensioning Cable
8:05
Cheaper Than Dirt Videos
Рет қаралды 35 М.
Fixing The Self Propel On A Toro Mower
12:31
INSIDE HOUSE GARAGE
Рет қаралды 43 М.
Real Man relocate to Remote Controlled Car 👨🏻➡️🚙🕹️ #builderc
00:24