ToSeven DM01 motor settings

[@HighVoltageKits]

I just plugged mine tonight. Thanks for this. You are right. This level of control at the bike level without bluetooth and extra devices is ahead of both cyc and bafang.

[@LierskogenEbikes]

It became even better since I got mine motor in April. ToSeven added some new features for torque sensor control in June. I'm waiting for reprogramming cable from them to do updates.

[@JoLe1991]

the torque settings are pretty detailed. got the bestsensation with following parameters: mode: sensitive min voltage: 700mV max. voltage: 2700mV start voltage: 750mV Startup angle: 30° Filter: 1 Strength: 8

[@LierskogenEbikes]

I need to get programming tool. My motor version is from May and I don't have Strength parameter in the menu.

[@JoLe1991]

@@LierskogenEbikeswhen I first got the motor 3 weeks ago (from pswpower) I was so impatient and installed everything fine until I shortened the power lead and inverted polarity... controller bricked. Got the replacement controller straight from the factory through pswpower along with a new display (although I think the display is identical). so my controller is brand new. original torque sensor works fine.

[@lokz9632]

Great and informative. We are waiting for more!

[@LierskogenEbikes]

It's coming ;)

[@TL1000S97]

Very interesting product. Think I should replace/upgrade my current bike that has the BBSHD.

[@LierskogenEbikes]

This motor is far better than BBSHD.

[@ataksnajpera]

A czy można ustawić sobie swoje własne RAMP TIMES? Czyli w jakim czasie silnik przyspiesza lub zwalnia do zadanej mocy? W CYCu na ASI BAC można było to sobie ustawić. Np. W CYCu z ASI BAC miałem 2000ms do rozpędzania i 1000ms do zwalniania. Fajnie by było jakbyś zrobił następny filmik z dokładnym omówieniem każdej opcji co robi i tak dalej. Szczególnie AUTOLEVEL w APPLICATION wygląda interesująco! Jak to działa? Zwiększa poziom wspomagania wraz z prędkością czy inaczej?

[@LierskogenEbikes]

Nie testowałem jeszcze wszystkich opcji. Przy niektórych nie czuje wiekszej roznicy. Mam sporo innych robót na głowie i czekam na kabel do przeprogramowania sterownika, więc coś nakręce później.

[@ataksnajpera]

@@LierskogenEbikes ok

[@elektrorider3507]

Looks like same perimeters are similar to Bafang Ultra setup. Interesting is if the motor is working on principle of reading torque only or power of the rider. Also if the motor support the start from zero speed.

[@LierskogenEbikes]

You can choose youself, if you want to have motor starting just by torque excerted on pedals or combined with rotation of pedals.

[@jonk8337]

Toseven just sent me an invoice for a DM01 to buy directly from them. I want to upgrade my 52V BBSHD. I have another setup with a torque sensing rear hub and like the feel of it better than my BBSHD, but it lacks the power of the BBSHD. Any thoughts would be greatly appreciated.

[@LierskogenEbikes]

You see yourself how better it is to ride motors with torque sensor then :). DM01 is like BBSHD, same power and torque just with torque sensor. Really good motor for the price.

[@invisible9455]

is 30A the maximum you can set?

[@LierskogenEbikes]

Yes, 30 Amps is max available.

[@saida7300]

I bought this motor, too. But my menus look a little different. And the advanced menu only has 2 settings (Battery and LimitSet) 😢 Also, it feels like the torque sensor is not being used by the software.

[@LierskogenEbikes]

The one sold by PSWpower does not have properly functioning torque sensor. Get in touch with ToSeven.

[@pxl666]

is this same with dm02 ?

[@LierskogenEbikes]

Yes. To7 made some changes in menu after recording this movie.

[@invisible9455]

Where to buy this motor in the eu?

[@LierskogenEbikes]

There is no seller offering this motor in EU. I sell these motors to customers in Norway only. You can order it directly from ToSeven.

[@wapiti128]

Can this controller be set for miles per hour MPH?

[@LierskogenEbikes]

Yes, it can be.

[@wapiti128]

​​@@LierskogenEbikesWill you please tell me what the power level in the shift sensor is for? Also, is the rim speed sensor adjustment for making the mph or kmh more accurate? I noticed my speed sensor is about 2-3 mph off.

[@LierskogenEbikes]

@@wapiti128 Read the user manual for this screen. It's available for free on Internet. You will find all settings there.

[@wapiti128]

@@LierskogenEbikes I will search for it. It came with one but it is very vague.