ToughBuilt StackTech 2 in 1 Convertible Hand Truck Stacktech Hand Truck

[@MrSteveCasper]

Your voice sounds just like Howard Stern. Love your reviews on all of the stacktech products if they can manage to get and keep it in the stores I'm investing into it.

[@TechMadeEzy]

Thanks buddy

[@AKSKSMAN]

I was thinking more like Peter Griffin

[@neverfalter6702]

Just an idea, but you could use a small magnet to tell what’s steel on the products. Thanks for the review!

[@TechMadeEzy]

Thanks

[@jasonboyce6050]

at 8:27 is that a massive crack in the forging of the bottom? thats not good.

[@TechMadeEzy]

Yup, not even sure how that happened. When I was assembling this it wasn’t an issue and I didn’t even get to use this other than moving it around and putting empty boxes on it so I’m gonna have to make a claim.

[@martinmiller7623]

Not sure this is a forging looks like a casting. Use your Dictionary…. Sorry ❤😊

[@martinmiller7623]

Forged parts have some markings the process hey I’m retired and love being hopeless til it’s modified for task at hand.

[@mastercom27]

Hello! is it possible to open the drawer if a work surface is installed on top?

[@TechMadeEzy]

Yes definitely

[@cullinthemost]

What is the height in handtruck configuration with the 3 drawer attached? Would they fit under a tonneau cover in a truck bed while attached?

[@TechMadeEzy]

Remind me and I will check, poke me tomorrow late am

[@patrickg5286]

With only the 3 drawer box (or two of them side by side) it would fit under the cover on my F150 (retractable cover, not low profile), but the handle will not. You would have to slide it under in dolly configuration. The handle sticks up roughly 3½ feet in hand truck configuration.

[@patrickg5286]

It's just under 26" to the top of the drawer box

[@Bigdog1787]

Nice review I still want this even though it won't do fit in cart mode on my trailer I made. It will fit if my machine in not on trailer. I made width of the trailer 3f 8inch.

[@TechMadeEzy]

Thanks 👍🏼

[@brianb1179]

I could definitely use this , I've been waiting for them to come to Quebec , 😢 unfortunately i guess I'll have to stick with the older Bosch L boxx system , it's been okay , just wish I had more drawers options. Those tough built look pretty nice though. I wonder how it's going to hold up in our Canadian winter and jobsite conditions.

[@leonardobehrens1204]

Probably an Ontario tool retailer is gonna get them soon from what I was told. They'll arrive this year for sure.

[@internalharm]

i was keeping en eye on this for a while. I didnt want to pull the trigger on red team yet. I am leaning towards tough build so far. You should return the cart. That crack is at a critical area.

[@TechMadeEzy]

Yup

[@geomax3465]

Amazing Video!... Thank you SO much for your time and dedication. The crack in the aluminium part and cast is NOT good. I think they need a little redesign of that bolt area and better quality control for all the products.

[@TechMadeEzy]

Not sure how that happened. It’s interesting if you watch the set up video the crack wasn’t there but all I did was put empty boxes on this thing, so I just don’t know how it cracked.

[@chazter6]

So I travel a lot for Dance Competitions. I own a Chrysler Pacifica. Every time I go check into a hotel, I cant find readily available luggage carts. So I am looking to find one that I can bring one with me thats compact to transport and hold adequate amount of big luggage and able to fit into elevators. Do you have any suggestions? I am wondering if this is acceptable.

[@TechMadeEzy]

Hi I don’t think this is a good match, it’s very heavy and it’s not made for luggage because of the way the base is designed even when it’s open on four wheels

[@Jtx_Tools]

Great video! I was thinking of switching over from packout because I love the color and the rails, however I live in the desert where there is a lot of dirt and rocks driving on unpaved roads I can foresee the locking mechanisms malfunctioning due to dirt and dust that would ultimately get in there. Wish packout would just sell us the black ones in the us

[@martinmiller7623]

Thanks nothing better than letting the end user to control and configure the TOOL .😂🎉❤😊

[@sswwooppee]

It looks like the crack in the toe plate wasn’t there during the assembly part of the video. Did it get dropped hard or something?

[@TechMadeEzy]

It wasn't there during setup it's interesting because I didn't put any weight on this so I don't know how that happened but that concerns me I'm going to have to swap this out

[@duncdunc76]

Could just be a scratch in the powder coating that looks like a crack if it wasn't there during assembly. You should look at it super close to see if it's just scratched powder coat or an actual crack.

[@Breault720]

you have the bins for the bar in your organizers

[@TechMadeEzy]

Yup honestly didn’t realize but I do have a few thank you

[@DarkPhoenix776]

Where can I get this it's out of stock everywhere

[@TechMadeEzy]

The only way you’re gonna find it is if you just drive to many different Lowe’s stores check their stock and check their above stock even in certain isles. We actually had to drive to Florida to get this one. You can also go online and use different ZIP Codes on the Lowe’s website until you find one and then when you do, you’ll be able to set it up for pick up. They won’t offer delivery for some reason. good luck.

[@Joeshmofoshoyo]

I'm impressed.... Great review, I'm definitely switching over from Ridgid to StackTech. Some of my Ridgid boxes won't stay clipped in. The metal latch presses into plastic hooks, the hooks wore down, such a dumb design. Tough Built Looks awesome!!! I don't dig Milwaukee, Too much red.

[@ElectroAtletico]

Great! Now show a video showing how you take those annoying stickers from the boxes!

[@TechMadeEzy]

I hear you, I've done okay manually peeling them off slowly but I hear a hair dryer could help

[@黄冠鈞]

❤❤❤❤❤❤❤❤非常詳細的解說🎉🎉🎉🎉🎉🎉🎉

[@TechMadeEzy]

Thank you

[@tanktexas]

This would be cool for my back up inverters and gear. Like the ego power station is heavy and having a set up would be nice

[@smartyoutwo]

可惜現階段只有在美國販售，連ebay都還沒有看到販售，期待夏季新品上市，正在猶豫 ToughBuilt or Milwaukee

[@12hei12]

Same here

[@andrewherrold343]

Where did you get this? They are sold out everywhere.

[@TechMadeEzy]

We found it in the store in North Carolina we ordered it for pickup the ones they told us it was ready we pretty much drove down from New Jersey

[@theaverageoffroader]

Does it fit in a truck bed? Like laying down or on its side? I have the milwaukee hand truck and it fits in the bed while turn on its side. Let's see a video of that!

[@TechMadeEzy]

Yes, You can lay it down in a truck bed

[@theaverageoffroader]

@TechMadeEzy I wanna see if if it fits in 4 wheel mode though with single drawer of tool box. I have a teanou cover on my bed and looking for solution to be able to just pull out my stuff rather than having to take it all apart and back together every time I take it in and out of the bed. F150 bed height is 21inches. Need to know the height of the hand truck with the single drawer or regular tool box still attached.

[@TechMadeEzy]

Ok good idea

[@vanliferr4079]

Yeah, this stuff looks sweet. I would buy everything but you can’t. It’s not a stock anywhere.

[@TechMadeEzy]

If you look hard enough and you drive far enough, you would be surprised. I wish you good luck.

[@삶-x9r]

굿 좋네요 한국에도 좀 팔아야하는데 눈구경만하네

[@justinssebanenya1329]

How does this compare to Cosco Convertible 4--in-1 hand truck that goes for $129.99 - $159.99 at Costco (usually on sale at $99.99)?

[@TechMadeEzy]

Don’t know Justin, have you seen or used that one? This, of course, fits a tough built stack Tech toolboxes, which is an advantage

[@Typomancer]

I’ve got one of those and I hate that the nose plate feels like it’s on a hair trigger; the nose plate may as well not have the ability to fold up, since it very easily unlocks and slams down. I’m thinking of replacing it with this TB handtruck since I’m accumulating Stacktech boxes (which I absolutely love).

[@duncdunc76]

Looks like the TB dolly is very similar to the Cosco 3 in 1 dolly. I've got the Cosco 3 in 1 dolly which is like the 4 in 1 but the foot doesn't fold up. It has been great in my applications of using it to transport Dewalt ToughSystem boxes, ladders and step platforms on job sites. It's been so handy for both rough terrain transport in its 2 wheel configuration as well as handy loading up a lot of stuff on it in 4 wheel configuration on concrete surfaces. Tough Built has got a winner with this dolly if your in the Tough Built platform imo. It is a bit pricey considering you can get the Cosco 3 in 1 for $99 often. But ofcourse the locking feature for the boxes is pretty neat imo If your willing to spend the $.

[@duncdunc76]

@justinssebanenya1329 I think your prices are for the Cosco 3 in 1 not the 4 in 1. The 4 in 1 is around $190 usually.

[@scotts4125]

I have the 4 in 1 and it's great. I have no issues with the toe plate on mine as someone else posted. The best thing is you can use it at a 45* angle between dolly and hand truck. I don't use it a lot but when I need it it's awesome to have.

[@CarlosGonzalez-km9xr]

Some of those are just tack welds. Kind of hard to tell, but one of the welds appears to have a crack.

[@TechMadeEzy]

I have to say I didn’t have time to exchange it or do any warranty claim, but I’ve had no issue and I’ve used it a few times

[@rgjohnson3rd]

nice

[@TechMadeEzy]

I saw your question I’m assuming if you take off the wheels it’ll fit but I don’t know why it would want to do that. At that point you can just buy the XL box. It’s the same without the wheels.

[@slapjack2000]

👍👍

[@joejoe6949]

I saw the crack did it get worse ?

[@TechMadeEzy]

No and ToughBuilt swapped it out for me it’s on its way

[@Shadypoolguy]

I’ll stick with team red as much I was excited for this system! I’m just too far invested in the red system to switch, hoping they make something similar soon!

[@Rottwiler44]

It isn’t like you can’t resell pack out to recoup some of the cost.

[@johnreynolds4611]

I don't understand why we in the US or at least in San Jose CA, can't get any stock at LOWE'S. There is a pitiful selection at my local store and they have no plans to order any more. How is it that in Australia, and the UK they have no problem getting Stacktech products, but here in the US, home of Toughbuilt, we can't get anything. AND Toughbuilt will not allow direct orders from them. How are they going to make money if they will not ship products to stores?

[@rccosplay3249]

The castor wheels are small and solid, can't roll over much other than smooth hard surface. $269 is about $200 too much.

[@TechMadeEzy]

you own one?

[@mordredthehero]

@TechMadeEzy I'd guess not. It seems like it's solidly built, and the castor wheels look plenty big to me. I thought 269 was a little much at first, but upon reflection, if it can handle 400 pounds in hand truck mode and 800 in cart mode, it's a steal imo. The Milwaukee equivalent is only 40$ less and is a hand truck only. I'm pretty partial to Milwaukee, but this is obviously worth the price.

[@TechMadeEzy]

As you know, I’m just doing a review I’m not a construction guy. I’m not putting this through the test but definitely first impression putting this together using it for a few days with different configurations. I feel pretty good so far.

[@duncdunc76]

​@TechMadeEzy Its a pretty good dolly even if its a little pricey. Its probably worth it since it has the box attachment system on it. Cosco makes a 3 in 1 that is very similar and they usually charge $169 for it but you can often get it for $99. I have one and have used it for several years with my Dewalt Toughsystem boxes and it works great. If I wasnt already heavily invested in the Dewalt system id probably get into the Tough Built system and get this dolly. It is a very versatile solution for transporting the box systems and so much more on all kinds of terrain in my experience. And the Tough built box system seems to be a winner.

[@JKenyon93]

The outside pockets on the tote look useless if you want to stack stuff beside it

[@TechMadeEzy]

One side yes

[@user-jh1mq2ih2u]

Latches stick in freezing weather

[@SynergyGamingTV]

Please use a tripod

[@TechMadeEzy]

Thank you for your feedback honestly in most cases it’s just not possible with the way we were review by the point of view. From time to time I do and I am aware that I tried to limit movement movement smooth so it doesn’t bother the viewer. I do appreciate your feedback.

[@nicklindsey3099]

You found this items that are now impossible to find in November 2024

[@TechMadeEzy]

If you’re willing to travel, you’d be surprised. What I would say is get the Lowes part number go into a store and ask them to search inventory and other stores. But again be prepared you might need to take a real long drive. That’s what we did. We actually drove down I believe to North Carolina.

[@paulgrice6766]

LOOKED LONG AND HARD THAT CRACK WAS NOT THERE IN YOUR ASSEMBLY VIDEO

[@TechMadeEzy]

Paul you are correct I went back to the set up video and everything looked fine, so this must’ve happened after putting it together. The weird part is we only had boxes on this unit. They weren’t even full. There was nothing inside of them. I’ll have to contact them and get a replacement.

[@DonnieBHM]

Too heavy, assembly shows how poorly parts are made. Took a hammer to get the parts together.(the handle) Several of the welds had flux wire pieces still sticking out. I tried it on one job. Switched to the 4 wheel dolly, and the equipment back to my old hand trucks. Thx for the video.

[@dustinkrebs8229]

That metal casting wasn't quality controlled. Return it and get another one.

[@TechMadeEzy]

Definitely

[@trippleHelixV2]

You cannot buy it anywhere.

[@TechMadeEzy]

I know it takes time but try to run around to different stores when you have time you might actually be surprised to see one sitting on the floor in stock

[@SD-jf7nb]

Lowes has a price tag on the shelf but no units yet. 🤨

[@TechMadeEzy]

@SD-jf7nb keep walking in the stores also keep checking Lowe's online with different zip codes

[@DjShepard]

@@SD-jf7nb what was the price?

[@TechMadeEzy]

$269

[@kellstat]

46 lbs.? You sure?

[@TechMadeEzy]

Very

[@kellstat]

@@TechMadeEzy ok, you posted 10.8 kg? And that would be closer to 25 lbs.

[@TechMadeEzy]

@kellstat my mistake should be 20.8 kg thanks for catching that

[@JJ-qi9zn]

Its a Lowes Product so I will not trust it. Lowes in Az. sells low-quality products that do not handle the extreme heat and sun out here.

[@yo3rdtier128]

No they don’t

[@stritheor]

It's not a Lowe's product but a product that Lowe's may carry. I've been using Tough Built tool punches for years now. Long before Lowe's ever started carrying TB. That being said, TB quality has noticeably slipped since I first started buying them. Cheaper manufacturing processes or materials one. Either way, they're not quite the Tough Built they built their reputation on. You are right about Lowe's though. Stay away if at all possible.

[@JJ-qi9zn]

I have first gen Milwaukee plastic boxes and they are still holding up. I will not purchase any product from Lowes due to many past purchases that proved sub standard quality from them.@@stritheor

[@leonardobehrens1204]

Craftsman and Kobalt. Not TB

[@twistedhillbilly6157]

Lowes garden and wallpaper center doesn't sell quality stuff anywhere... Homeowners and apartment renters who fall for gimmicks are the customer base..

[@twistedhillbilly6157]

This entire system will NOT sell...

[@MONEYZ123]

and yet...here you are...commenting and watching ANOTHER Stacktech video. 💀💀🤣🤣

[@twistedhillbilly6157]

@@MONEYZ123 Trying to bump your algorithm so you can make a lot more money... I watched a bunch of them trying to figure out how they can justify charging the same price as Packout for homeowner/apartment renter gimmick stuff.. .. The more I saw, the worse the design looked and the fake comments were kinda embarrassing.. You're welcome for the added activity..

[@keithklickstein7102]

looks like you can not open the units on the handle side while in place since the handle will get in the way. The entire idea on any of these stacking systems is the ability to open lower units without unstacking. Poor design on Toughbuilt's part

[@MONEYZ123]

You can, just got to unlock box above and tip back an inch to access center latch then drop box back down.

[@duncdunc76]

​@@MONEYZ123Yep pretty easy actually. Its basically a non issue with how awesome the locking system is.