Tow Mirror Install: 2009-2018 Dodge Ram Towing Mirrors (Add Power Folding Wired) - 4th Gen Ram

[@boostautoparts]

Link to 1500: boostautoparts.com/products/dodge-ram-1500-tow-mirrors-2009-2018?Dodge%2009-18%20Mirror%20Install%20W%2F%20DIY&Comment&KZbin Link to 2500/3500: boostautoparts.com/products/dodge-ram-2500-3500-tow-mirrors-2010-2018?Dodge%2009-18%20Mirror%20Install%20W%2F%20DIY&Comment&KZbin Updated video showing how to do the upgrade with our much easier wireless modules: kzbin.info/www/bejne/o6bao3ShlN2cbqs

[@Fabian7024]

Exactly what i was looking for thank you

[@boostautoparts]

Glad it could help.

[@RobDorchak]

Very detailed install instructions, everything went great until in came time to mount the switch. I have a 2017 Rebel and there is something behind that panel above the parking brake release. The entire area behind the panel is blocked so I have to figure out an alternative place to mount the switch. Other than that, they look & work great. Feels good to not have to reach out the window in the winter to pull my mirror in when I enter the garage.

[@boostautoparts]

Thanks for the feedback - I will share that with the development team. The placement of the switch is not overly critical, as there should be some extra slack in the harnesses to change the mounting point.

[@coreycarver9974]

I wish I could get this retrofit for the 88-99 Chevy or gmc trucks

[@josued1313]

I have a 4th gen 2500 SLT cummins and dont have power mirrors. Theyre the smaller ones and theyre manual mirros but I want to convert them to tow mirrors. Can I put these kind of mirrors on or do I have to buy the manual tow mirrors? Great content by the way. This video really helps

[@boostautoparts]

Can you adjust the glass itself from a switch in the cab?

[@jaydab]

I have power mirrors already and 1 of mine stop working. I want to replace and put these mirrors on both side. Is this a plug and play go if I order these with no extra hooking up wires. I mean it should just plug right in like my old and should work fine? Is that correct?

[@boostautoparts]

Yes - depending on the features you select. Give our team a call at 765-831-2830 and we can make sure to get you a set that is completely plug and play.

[@MUDDMAN777]

If you could give me some clarification on what codes need to be enabled I couldn’t really hear in the video how I need to do that and I couldn’t find another video

[@boostautoparts]

Please reach out to our support team at [e-mail] and they can assist!

[@ceddds]

did u just make a hole in the ruber firewall to pass tru u orange wire to the fuse boxe ?

[@boostautoparts]

Yes, through one of the rubber grommets.

[@migueljtorolopez3522]

Hello! This can be done in ram warlock 2023?

[@boostautoparts]

We likely have an upgrade - contact our team at 765-831-2830 or via email at [e-mail] for assistance.

[@TimFegan]

Thanks for the video. Do you have an installation option where I don't have to hook up to the fuse box? Maybe get power from inside the cab area? I have a 2014 Ram 3500. Also, how long would install be for a non-mechanic but handy installer?

[@boostautoparts]

There is not an alternative tap location in the cab. Installation for a non-mechanic with the power fold retrofit would likely be 3-5 hours.

[@TimFegan]

@@boostautoparts Thanks for the info.

[@josuevillanueva3016]

If my truck already has power folding mirrors, can I buy these tow mirrors and plug and play them without any problems?

[@boostautoparts]

Yes, as long as you configure the mirrors properly and state you originally had power fold.

[@obesemt.bikeriding1601]

Will these work on the 2019 new gen ram 1500 too, or do you have lots for them?

[@boostautoparts]

We do not currently have any for the 2019 New Generation Ram. They are under development and should be available within the next 6 months.

[@satxification]

If I replace the current switch on the driver and passenger side door with a switch that has the power folding button, will it work for these mirrors ?

[@boostautoparts]

No - you can't simply replace the door switch there is further work that would be required.

[@AdamH6988]

@@boostautoparts could i use the circuit taps to help with the new power folding switch?

[@boostautoparts]

@@AdamH6988 This kit comes with the necessary hardware.

[@blakedexter3224]

I have a question : can we change the mirrors/doors/Windows control switch of the 2009 dodge ram with the one of the 2013 dodge ram so that i can have the power folding button integrated So i Wonder if that work with this installation ?

[@boostautoparts]

That is not possible on vehicles older than 2013.

[@ericksagastume879]

What about for a 2017 ram 2500 tradesman

[@boostautoparts]

This will work for 2017 Ram 2500 Tradesman.

[@bradleyblack8940]

Is there an option for a more OEM switch ?

[@boostautoparts]

We will be releasing an upgrade that utilizes the OEM switch within the next 60 days (writing this on 3/21/22 for future reference). Email [e-mail] and ask to be notified when the wireless power fold upgrade for 09-18 Ram's is released and our team can email you when it's out.

[@Meanbastal2djr]

Will this work on a 2012 ram 3500 for the power folding option?

[@boostautoparts]

Yes you can get power fold mirrors for your 2500. Here is the link: boostautoparts.com/collections/dodge-tow-mirrors/products/ram-2500-tow-mirrors-2010-2018

[@blakedexter3224]

Does it work on a 2009 dodge ram laramie ?

[@boostautoparts]

This video will be relevant if it is a 2009 1500. If it's a 2500/3500 it would be a different video to follow.

[@jasonherwig7907]

Did you ever do it? And if you did how’d you do it?

[@blakedexter3224]

@@jasonherwig7907 no i sold my 2009 and bought a 2011 🤣

[@jasonherwig7907]

@@blakedexter3224 💀💀 nice. I got a 2012 Laramie I wanna do this too. Congrats on the truck tho brutha. Safe driving 🤘🏼

[@MotorsMechanic]

Great video. But man, that's a lot of work. 😢

[@boostautoparts]

Our wireless upgrade is a lot easier. Check that procedure out here: kzbin.info/www/bejne/o6bao3ShlN2cbqs