Toyota 2016 Highlander Maintenance Required Soon Light

How to reset maintenance required soon light on Toyota 2014, 2015, 2016, 2017 Highlanders as well as many other Toyota models.

[@jamesdavis2322]

Thank you. I watch this video every 5,000 miles when I change the oil.

[@justsomekids5715]

Same. Maybe one of these times I’ll remember the three steps it takes. 😅

[@Bluetouchwiz]

Same here. See you all in another 5,000 miles 🤣

[@thatgirlann]

Your instructions were the only 😅ne that worked. Setting odometer to Trip A is critical and only you said that! Thank you!

[@justsomekids5715]

Thanks for making it short and concise! You the real MVP

[@NickVinckier]

Thanks so much for this! For those without a start/stop button and a keyed ignition switch the process was the same. Just turn the key to On then back to Acc then to On again while holding the ODO/TRIP button.

[@condor5635]

Nick Vinckier -thanks for watching and commenting on it Nick.

[@peterreggie1521]

Worked perfect.

[@D-NICE33]

Thank You very much! Worked like a Charm.

[@sarahdeluzio665]

Thank you SOOOO much!!! Short and clear directions. I really appreciate you making this video! It worked!

[@kmoore51589]

Finally a video that worked! Thank you

[@saundby]

It worked perfectly, it just took me about 5 tries to do it by memory in my car while waiting at the Post Office to get it right, but I finally did. Thanks!

[@user-me9bz5dt4o]

Finally a helpful vedeo!! I had that problem for like a week didn’t know what was it about I was about to go to Toyota dealer but then decided to go and check on KZbin and came across on your video I did what you did and there goes everything was normal it worked. Hooray 😄 thanks 🙏

[@frankrizzo442]

Thank you for this. I have a 2016 and it doesn't have the push to start. I just turned the key off then on and it worked.

[@bluesnjax9134]

Watched three videos before I found yours, that worked!

[@zulyo400]

Thank you so much! I hope you got that dry cough checked up.

[@condor5635]

A cough a few times and you believe I need to get it checked out?

[@dazoerb]

Straightforward video that works, thumbs up

[@charlesrobinson5709]

Great Video, Helped me greatly, Thanks so much

[@jamesmcneely5124]

GREAT! THANK YOU! WORKED PERFECTLY THE VERY FIRST TIME!

[@rebeccabrewster9288]

Thanks so much for this.

[@CD40ligand]

Thank you for posting this!

[@dorisdalyla2315]

Thank you! I was able to do it following your instructions!

[@condor5635]

Glad it helped. Hope you are taking care of your Highlander! ATF and oil changes, coolant, air filter. 93k and mine runs like the day I bought it. Love it!

[@relaxman-tu1tp]

Thank you so much, very helpful 👍👍👍

[@zamabw]

Works perfectly. Thank you so much!!

[@riyadw9599]

Thank you so much!!! Finally the light is gone.

[@mcallaghan8]

Thank you so much, this was perfect!!!

[@MickNJ1979]

If you do not have start top button turn ignition to acc 2 times do not turn on car just acc mode 2 times fast

[@elenaleboutillier8003]

Love it, thank you so much for sharing it was driving me crazy

[@MrAvens2s]

Best explanation then the other vids out there

[@condor5635]

Thanks for the feedback Sammy.

[@moshoodoseni6514]

Thanks, straight forward answer

[@RichD]

Thanks for this!

[@jamesjudd5990]

Easy and clear !! Thank you

[@nurseypie]

You're my hero.😊

[@abblfe]

Just a couple of small things which threw my off for a minute or so. After you set the odometer to trip 'A' and shut off the ignition, it will revert back to your odometer setting numbers. That's OK, but you do have to hold the reset button in, like is shown in the video, and press the ignition button twice while the odometer numbers are still lighted - which gives you about 3 to 4 seconds. If the numbers go out you have to start again. No big deal, but it did stump me for a few minutes until I figured out you had to do all of this quickly or it wouldn't work. Once you get it right it works perfectly, that annoying little light will be gone!

[@MyLifeRideorDie]

Thank u! Will try it!❤

[@sarahjay2147]

It worked! Thanks!

[@nurovahmad]

Nice video very useful

[@michellevil7629]

I just did it, thank you

[@olusanjoakerele9232]

Thank you it really worked

[@AmazingGrace0406]

this helps a lot

[@jessejaviangel]

Thanks for this 👍

[@amb132]

Thanks so much!

[@almosttactical5506]

Thank you sir

[@bobdabolina5389]

Top knots buddy

[@travellinfolk6884]

Very helpful 👍👍

[@fakeusa]

Thank you!!! No where did anyone say to use trip a!!!!

[@timhahn2428]

Thanks

[@angelagarcia3160]

Thank you😊

[@EverythingHenry]

Thanks, Honda express tech with a highlander coming in lol

[@toddcraig1726]

Thanks!!

[@geejayp3583]

Thanks very much

[@orlando7874]

Thank you

[@BigFiveJack]

Is it confirmed that it comes on at 5,000 intervals only? Will it come on if you need to replace a cabin air filter, or do something with your radiator fluid, or...???

[@condor5635]

BigFiveJack - strictly mileage driven. Thanks for watching!

[@BigFiveJack]

@@condor5635 Thank YOU for the info!

[@markdewalt5870]

Do you press the brake pedal while pushing the start/stop button?

[@condor5635]

Mark Dewalt - No you don’t because you’re not starting the car he only getting it into the accessory mode

[@Keish04]

How long after should you get your vehicle service when the reminder comes on?

[@condor5635]

keish04 - If you listen to the video it says every 5000 miles

[@abblfe]

It should be a general reminder to get your oil changed, but if you're using synthetic or even semi-synthetic motor oil (that's what Toyota recommends) you'll be good for a minimum of 8,000 miles before an oil change. Aside from that just check your owners manual. Believe me, if you take it into Toyota for service every 5000 miles they WILL find something to fix/change/repair/tighten/service/clean/adjust or replace and it will be rather costly.

[@condor5635]

abblfe - key word is ‘find’ LOL. Yes they will find something to ‘repair’. Thanks!

[@Akotski-ys9rr]

I would not say asap but at least at your earliest convenience

[@condor5635]

@@abblfedo not go 8000 or 10000 miles for oil change even when using synthetic. Change at 4000 or 5000. Cheap insurance. This car now has 105K and it runs like the day I bought it. Regular oil changes ATF drain and fills, and a coolant change.

[@chus9231]

It worked for me. Thanks a million.

[@kaylifeisajourney1384]

Thank you so much because where I bought my vehicle they were pretty much dick heads and they did not reset the light thank you I appreciate it

[@condor5635]

K gossip - glad it helped. By the way this is set to 5,000 miles to come back on after resetting.

[@megalodonjoker8946]

👍

[@shanesterner1922]

What about standard key start

[@condor5635]

My other Highlander same thing. Key Ignition on after putting it in Trip A odometer I believe. Then the five dashes countdown and blink after complete. Give that a try

[@rickybobby3209]

Not here maybe 2017 highlander but thanks tho

[@condor5635]

No idea what your reply means…

[@cejkwo100]

I have the same vehicle and I have to do mine. Once I do this how long will it stay out for?

[@condor5635]

John Laizza - 5,000 miles

[@cejkwo100]

@@condor5635 thanks

[@jb4453]

Thanks, but this does not help. My 2016 does not have a pushbutton. Only a key ignition

[@condor5635]

The key type typically work the same way. Turn the key to ignition (not starting) while holding the button. Same thing will happen - dashes count down and the 5 zeros flash indicating reset

[@Akotski-ys9rr]

Am I the only one who only does this after I change the oil?

[@condor5635]

Good idea and reminder. 5k is a great change interval with synthetic and that is what light is set at

[@Akotski-ys9rr]

@@condor5635 seems like most people who have commented have just reset the light and have done no servicing to their car which is concerning. Wouldn’t you agree?

[@condor5635]

@@Akotski-ys9rr -Of course that’s the whole point of the light. It comes on every 5000 miles for you to do something. It’s an action. I use it as my oil change indicator. Thanks for watching

[@kazgaming5088]

Would be fantastic if I had a start stop button on mine... -_- Instructions on the instruction manual also don't work as the description does not match what actually happens when you follow the instructions.

[@princesylvesterbotu7312]

Thanks