Toyota Aurion Kenwood Double Din and CMOS 130 Reversing Camera Installation

[@nidzdotnet76]

Just run it off the reverse tail lights loom bro. Then it triggers when you put it in reverse only.

[@stealthrazor7314]

its a ddx4015bt ? this firmware is awsome

[@avneet911]

Stealth Razor Smith it's a 4016, the 2016 model. Minor improvements over the 2015.

[@padangamuak]

Help me please.. My.cmos 130 display no signal recently.. I connect red wire to reserver light power and black to nut body chassis.. Before its turn auto and no problem.. But .. Now.. No signal when inturn reserve gear

[@avneet911]

m. antoni Rifdi Hi Antoni, not sure whats wrong? Seems like you’ve done the connections ok. If you have a multimeter you need to check whether there is current coming from reverse lights when you put in reverse. If yes, maybe some issue with the camera itself. Let me know how you go. Good luck

[@정다한-i1f]

Hi, where did u get that power(extension) cable from? i've recently bought cmos 130 camera and no such cable inside the box. The line i've got seems to be to short to connect from dashboard to bootlid

[@avneet911]

정다한 the power extension cable is just a 2 core bought from a local electrical store. Anything close to 16awg would do

[@정다한-i1f]

thank you :)

[@Fluffy_3763]

help why my cmos 130 not showing reverse line ?

[@avneet911]

If the cam is not showing lines by itself, you can goto settings on the player and turn ON from there. Manual has all the info on how to do that.

[@Fluffy_3763]

@John E McDonald DDX 5035BT