Toyota Camry 2015-2017 Complete DIY Transmission serves Guide under $100

  Рет қаралды 6,922

AliMECH

AliMECH

Күн бұрын

Пікірлер: 46
@SurprisedBarnOwl-fc5hm
@SurprisedBarnOwl-fc5hm 2 ай бұрын
Been waited for this for a long time, thanks
@AliMECH
@AliMECH 2 ай бұрын
Hope you found it useful
@alejandroivo264
@alejandroivo264 2 ай бұрын
Me too bro
@headers12
@headers12 2 ай бұрын
Great video! I would suggest to always replace any gaskets when working on a vehicle. All that work can go to waste if that reused gaskets fails.
@ZombiePenguinKiller
@ZombiePenguinKiller Ай бұрын
I highly agree with this been there more than a few times lol
@chiefdan07
@chiefdan07 2 ай бұрын
One of the trans pan bolts is obstructed by the frame, needed to use a wrench to take it out
@eddiekoh2002
@eddiekoh2002 20 күн бұрын
how did u do that pls help i cant remove that 10mm bolt
@chiefdan07
@chiefdan07 18 күн бұрын
@@eddiekoh2002 Use a regular 10mm wrench, not socket
@chiefdan07
@chiefdan07 18 күн бұрын
@@eddiekoh2002 Then insert the wrench in the gap and twist vertically the on bolt
@mohdibrahim1350
@mohdibrahim1350 2 ай бұрын
Good to see you again bro.
@Jacksonjay-l3h
@Jacksonjay-l3h 2 ай бұрын
Well made video, I can see week of work on that video, new sub ✌
@AliMECH
@AliMECH 2 ай бұрын
Thanks for the sub!
@dutchvanderlinde6986
@dutchvanderlinde6986 2 ай бұрын
Hi Alimech I love yours videos! Can you make video how to change the rear brake pads and rotors of your Toyota Camry 2017 💙
@AliMECH
@AliMECH 2 ай бұрын
Yes I can, I will add to my list
@madelrocciba3875
@madelrocciba3875 2 ай бұрын
Great job as always
@AliMECH
@AliMECH 2 ай бұрын
Thanks
@waqarqadeer5217
@waqarqadeer5217 2 ай бұрын
Thanks for the video. When did you put drilled rotors on camry?
@AliMECH
@AliMECH 2 ай бұрын
I think 5 years ago, I did that kzbin.info/www/bejne/fGGweGylbKyqp68
@waqarqadeer5217
@waqarqadeer5217 2 ай бұрын
@@AliMECH nice job brother
@frschannel8217
@frschannel8217 2 ай бұрын
Thanks for the informative video. Do you think can I change my CVT corolla Hb's fluid and filter with same prosedure?
@AliMECH
@AliMECH 2 ай бұрын
Thanks, they should be identical, here is a nissan kicks CVT Transmition, to get more ideas how its
@Bianedden
@Bianedden 2 ай бұрын
Very informative 👍
@AliMECH
@AliMECH 2 ай бұрын
Glad you think so!
@osamaradwan8173
@osamaradwan8173 2 ай бұрын
Professional job, 🎉
@AliMECH
@AliMECH 2 ай бұрын
Thanks 👍
@seanb2491
@seanb2491 Ай бұрын
Is this the same on my Camry hybrid 2017
@gha5489
@gha5489 10 күн бұрын
Good job
@franckst-juste153
@franckst-juste153 2 ай бұрын
Very Interesting Video....I would like to do it myself and do not have a yard to perform this procedure. Where can I rent a Bay + Lift, for a couple of hours in order to carry out the activities mentioned in the video ?
@ItsVedyGood
@ItsVedyGood 2 ай бұрын
What’s a good Toyota site to get discount on oem parts?
@pcysneros
@pcysneros 2 ай бұрын
What’s the torque spec for the bolts and the pattern?
@Stan6053
@Stan6053 2 ай бұрын
When you check the level, do you keep the car running?
@AliMECH
@AliMECH 2 ай бұрын
Yes
@jakel1046
@jakel1046 2 ай бұрын
Is it in park or neutral?
@chaunicholas7169
@chaunicholas7169 16 күн бұрын
Can u tell me How many quarts oils
@icarius7793
@icarius7793 2 ай бұрын
Will your DYI work steps also apply to 2020 Camry Hybrid?
@emadalkahroosi
@emadalkahroosi 2 ай бұрын
what if i dont drain the half liter after?
@barzykarim8626
@barzykarim8626 2 ай бұрын
Sarkawtu bi.
@AliMECH
@AliMECH 2 ай бұрын
Supas bra
@Ariel0607-b8p
@Ariel0607-b8p 2 ай бұрын
Didn't you change the intake box or this video is older?
@AliMECH
@AliMECH 2 ай бұрын
Do you mean the 3d printed one? Yes I did till I print another with heat resistant material
@Ariel0607-b8p
@Ariel0607-b8p 2 ай бұрын
I have a 07 camry with 260k miles. My aunt gave it to me with 164k. I've never changed the trans fliud, and neither has she. It runs really smooth, engine also. Do you think i should still change it or leave it as it is?
@bizmofunyuns6463
@bizmofunyuns6463 2 ай бұрын
There is no service interval for the transmission filter. This is unnecessary. With the miles being what they are on your car, I wouldn't touch it. If you drain too much you may drain too much friction material floating around keeping it shifting smooth. If you change it you could have problems slipping gears. Only drain and fill your next car if it's under 100k over that, the risk is not worth it. If you develop an issue I'd do one drain and fill and see what happens. Good luck to ya and I hope this helps.
@Ariel0607-b8p
@Ariel0607-b8p 2 ай бұрын
​@bizmofunyuns6463 thank you so much. Very helpful
@lamondaforestry
@lamondaforestry 2 ай бұрын
Was the old filter dirty?
@AliMECH
@AliMECH 2 ай бұрын
It's not looking yellow like new one, for sure of I cut it open, I will find some
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 31 МЛН
Support each other🤝
00:31
ISSEI / いっせい
Рет қаралды 81 МЛН
Ultimate Car Maintenance Guide: 300,000 Miles and Beyond
8:07
Dannys DIY Garage
Рет қаралды 32 М.
Should You Flush Your Transmission Fluid? Is It Dangerous?!
13:22
Royalty Auto Service
Рет қаралды 182 М.
Are Honda CVT's Reliable?
12:47
speedkar99
Рет қаралды 43 М.
NEVER do THIS to your Automatic Transmission Car
15:15
The Car Care Nut
Рет қаралды 3,3 МЛН
Here's Why Changing Your Transmission Fluid Can Cause Damage
10:06
Scotty Kilmer
Рет қаралды 3,6 МЛН
2018 - 2024 Toyota Camry Transmission Oil Change
9:35
Screen Share
Рет қаралды 12 М.
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 31 МЛН