Toyota Landcrusier Prado 90 Body lift 50mm install

[@reeganlupton2278]

Great video mate, I've been putting off installing my 1.5" body lift for a while now but this has given me the confidence to do it 👍🏻

[@BuiltCruisers]

Thanks man! If you have any troubles message me on Instagram.

[@admd8167]

your exterior paint colour looks great

[@BuiltCruisers]

Thanks 👍

[@vouzenthal]

is the process similar for a 120 series ?

[@edanrutherford6244]

Hey mate those parts at the front of the chassis that are hitting your bullbar unbolt with one 12mm bolt on each one. From the front

[@BuiltCruisers]

You talking about the plastic rim on the underside of the bullbar?

[@Delza2100]

@@BuiltCruisers he means the chassis endcaps that you mention at around 5:44, that are making contact with the bullbar. All you need to do is remove the 12mm bolt and they will pop off with a light tap

[@edanrutherford6244]

@@BuiltCruisers at the front where you said you didn’t want to cut the chassis. Those rounded ends on each side of the front section of the chassis. Look from the front of the vehicle there is a 12mm bolt on each one to remove it

[@BuiltCruisers]

@@Delza2100 ohh yes I getcha. I should do that

[@feesh00]

Good videos thank you Does this model came with OBII port ? If so then where does the port located please?!. I have 1998 VX prado 3400 and i couldn't find the OBDII port

[@BuiltCruisers]

Cheers! Mine doesn't have that port

[@rihazmajeed3110]

my prado 90 series left side rear tire is like half inch out than the right side ..i was thinking if i loosen up the rear body mounting bolts will i be able to align it ?

[@BuiltCruisers]

Maybe but sounds pretty dodgey

[@chrislcful]

why did you chose aluminium for the body lift and what kind of aluminium is that?

[@BuiltCruisers]

Rhythm off road are a trust brand for Prado 90 body lifts so I went with them. Not sure on what aluminium but so far no issues.

[@tucco76]

Hi, I would like to order to manufacture some of them but don´t know the diameter. Does anyone know it?

[@donaloliathain6380]

Great video , how does it perform with the 2 inch body lift ?

[@BuiltCruisers]

Thanks! To be honest has some body sway but can be fixed with either no heavy roof rack or wider tyres.

[@donaloliathain6380]

@@BuiltCruisers cars looking good mate , I've been following you awhile , keep up the good work 👌.. do you have a 2 inch suspension lift with that ??

[@BuiltCruisers]

@@donaloliathain6380 thanks man! yeah 2inch front 3inch rear

[@Davfon23]

Why did you go for the body instead of a suspension lift? Just because of $$? Or is there other reason?

[@BuiltCruisers]

Yeah price was the main one and I can now fit the 35s.

[@Davfon23]

@@BuiltCruisers thanks for answering ✌️

[@jamesonbates1336]

Gonna have a crack at mine now

[@sergiogeorgeos1874]

Hi what about steering shaft extension did u need it or what

[@BuiltCruisers]

Yes, i ran over it briefly in the video

[@dereinejager2842]

Hi, very nice car. Have you the Color Code? Thank you

[@BuiltCruisers]

4E9

[@turkerkmil5476]

Can you buy diff drop for the 90 series if you can where can I buy it from

[@BuiltCruisers]

Try ebay

[@watahead91]

hey mate what size ufc antenna is that? can you send me a link please? cheers mate

[@BuiltCruisers]

Gme 6.6 DBI

[@watahead91]

@@BuiltCruisers length?

[@watahead91]

Also what base socket are you saying that's connected to the bull bar ? Pretty sure they're for fishing rods right? If you can please send me the link for what I've asked mate appreciate it

[@BuiltCruisers]

@@watahead91 1200mm

[@BuiltCruisers]

@@watahead91 bcf pryml rod holder

[@thantunaung4248]

Hi bro r u from nsw

[@BuiltCruisers]

Sa