Toyota Tacoma Gets 4 Inch Lift With Maxtrac Spindles

[@victorsalinas4666]

If you have the money spindles are the best way to lift a 2wd IMO. It’s keeps all the front geometry that the factory comes with. I’d personal go with CST spindles. Better welds and craftsmanship. Had some on a Tundra and they were great. Keeps stock comfort

[@999deathrace3]

about to purchase a 2wd 3rd gen here soon, def going with this lift and same wheels! truck looks great man

[@nattyfixit2898]

Thank you! Hope you enjoy your truck

[@Badass_Rooster]

Very very nice looking truck! I just ordered those same wheels for my Gen 2 Tacoma TRD off-road! I think they will look good as well with a white truck!

[@-Sam69]

Why did you steered the conversation about your truck?

[@bradgt5130]

Dude left me with more questions than answers. So I’ll help, it’s only for 2WD trucks

[@kitchenscience324]

Hey! Thanks for uploading this! I am looking at the exact same kit. Have you had any issues with it? Any shaking or loud noises? I am really concerned about highway speeds. Could you please get back to me and let me know what your experience is?

[@Its_about_that_time]

How much did install cost. I'm getting estimates of over 1,000 just for labor

[@kenryu364]

Didn't this dude say if you got questions leave it in the comments? Where's the answers

[@Its_about_that_time]

Yea I came to the comments for answers and didn't see any 😂. Good looking truck though

[@Aaronchristiann]

Sick truck man! How was the ride quality? Is it a good lift for daily use? Did you also cut the cross member to get the kit?

[@mariodiaz3897]

How does brakes feel think of buying same lift was thinking of getting 17 inch rims butt -6 off set do you have to get -12 offset will -6 off set stick out less 17x8

[@ryankekoakalanigaoiran8288]

Hey so I have a 2022 sports Tacoma 2wd, I really wanna make my truck a 4in lift. Do I need to buy the 3in lift and the Spinders? Or can I use my stock lift and just buy the spinders?

[@nattyfixit2898]

Hi Ryan, I’m going to post the link I used below. This is all I needed for the 4 inch lift you are seeing here. Up front it’s a spindle that adds the 4 inches and the brake line extension. In the rear it’s just blocks. Outside of that, it’s all stock suspension. www.headstrongoffroad.com/store/p207/Maxtrac_4%22_Lift_Kit_-_2WD_ONLY_-_%28K886842%29.html

[@alexgarcia3900]

I was like how the heck but then I noticed it's 2wd. Looks good though

[@_BisDak_]

On your tacoma, did you cut the cross bar underneath when you install the 4in maxtrac spindle lift?

[@nattyfixit2898]

Nope! There is no cutting required for this lift

[@sackman56]

did you do any kind of tune or regear with adding on the lift and tires? any decrease in performance and gas mpg?

[@nattyfixit2898]

That’s a great question, I have not! I haven’t felt the need to do either, I know this varies person to person for their preferences and needs. I feel like the performance is the same, but the mpg definitely dropped

[@jgoofy8722]

Mind me asking how much did it all cost you together? Also awesome paint on the exterior. What exact color is that? Got a nice pop with the new tires.

[@nattyfixit2898]

Thanks! The paint is army green and it can also be had on the 4runner and tundra (not sure about this new tundra generation coming out). The price is going to vary, I got the lift kit from headstrong offroad and that's a set price. But a local shop did the install and that is going to vary shop to shop. Same with tire shops, when you shop in person there is some room for negotiation so experiences will vary!

[@Fabian7024]

What is ur gear ratio?

[@jacobspookykid5328]

Did you have to cut part of the frame for a 5 inch lift?

[@nattyfixit2898]

Nope! This lift was entirely bolt on, there are no drop brackets or messing with the frame

[@jacobspookykid5328]

I just realized I typed 5 by accident lol. And good to know !!! Planning on lifting my taco

[@4bvenom733]

You didn't do a drop bracket for your LCA rt. Should of recorded inside yourself suspension what a 4 inch lifted need and looked of it

[@kevovek76]

Hey man I’m having some issues with my front in and I’ve just purchased the maxtrac 4” lift. I’m running 285/70/17 with 17x9 -12. Did you have any rubbing and what alignment specs did you use.

[@nattyfixit2898]

I have a little bit of rubbing but nothing major, mostly at full lock or when turning sharply onto an incline. I don’t know my alignment specs, if I can find the paperwork I’ll let ya know

[@xta.c]

Which area are you rubbing on? I’m planning on getting the same lift with kings 2.5 with 0 preload. Nice looking truck 🔥

[@tonydouangphachanh5343]

I’m cautious does fox or kings do 4 inch lift…

[@ttl-k-fitness1779]

Where did u get the 4inch from?

[@nattyfixit2898]

Headstrong offroad! They are excellent to work with, very helpful and know what they’re talking about

[@johnlyell7106]

Sweet truck! How does your Tacoma ride with the Maxtrac lift?

[@nattyfixit2898]

Rides great man! A little more stiff than factory maybe, but it feels more planted and has less body roll on turns which seems ironic because the higher center of gravity. But, I do have a much wider track width because of the wheel offset and the spindles kicking out the front wheels an additional .75" on each side!

[@jonathanvergara3939]

Has it fallen off yet

[@Oaxacooverland]

👌🏽🌮

[@cleanleaksv2]

might wanna change ur uppers lol

[@BDevi0us]

Should of spent the money on a 4x4 not 4x2? I guess fake it till you make it 🤦‍♂️

[@calebestill7535]

some people like to keep there trucks nice and not dog there 40k vehicle’s

[@micahdrinkard2608]

and some people really want a nice truck and cant always afford the extra 10k or so for 4x4

[@THEEVERYTHINGTHINGCHANNEL]

Don’t need 4x4 if you know how to drive, and your “4x4” looks a little too clean.

[@jimmybuckets6917]

damn u big salty haha

[@rayheller8450]

Lockers.. 2wd with rear lockers!

[@JosephMarin-n9x]

what is your mpg??