Toyota Tacoma Pop & Lock | Remote Locking Tailgate Mod (Install + Review)

[@peterholub7662]

This vid is way better than the one Pop & Lock has. As always, you do a great job explaining the install process. You do a good job of not assuming people know things while not overly dumbing it down.

[@tonyxaypanya6094]

Let’s be honest without this video it wouldn’t be so easy. I appreciate it so much! Best instructions on KZbin for this install. 5 stars! Thanks

[@zelaznog65]

Chloe, you weren’t lying about the routing around the gas tank! I got ‘er done though!!! Thank you for all that you do to help others in our Tacoma community!!! 👍💪

[@donovan007007]

She gives better instructions than most if not, all the guys out there.... subscribed!

[@RAWoutdoor]

Simp

[@Jerbt]

@@RAWoutdoor accurate pfp

[@robertofranciscocarmonasam5375]

As a mechanically-inclined guy, I completely concur. Chloe’s vids are always informative and her positive attitude is contagious

[@sebastiansolis5907]

Bro for real!!!

[@johnacott7045]

Could not have completed as smoothly without your video! Very very helpful.

[@antipfi]

Few comments for those with a 2016 taco limited. Great video btw, would have taken me MUCH longer to complete without you helping so thanks a lot. I had to modify the grommets from the kit to fit snugly in the tailgate. They have this little knotch in the bottom I had to widdle away with a knife and a side cutters. The rubber grommet used for the running the wiring into the cab; its further in under the carpet in the driver's side rear. I drilled a 9/16 bit then forced it through. I still put a small bead of silicone on underneath. I tried running the t harness to the connectors in the pillar like in the video, but harness doesn't fit those connectors. I ended up running it to kick panel. I had about a foot left of wire so all good there. Fun little project!

[@topsyball1049]

WoW, your system you installed is much better and easier than others out there. I hope your viewers appreciate your video and make this one their purchase. Thanks for the great video.

[@MrContactrobots]

this is the most organized how-to and pickup truck I have ever seen in my life.

[@0415jjttll]

I just installed the same thing on my Tundra yesterday, and definitely one of the best upgrades I’ve done so far. Glad you got the newer T-connecter because it was a chore figuring out which wires to connect into.

[@toanho1280]

Just did my 2023 passenger door gray and purple wire so press 2 times unlocked passenger door and tailgate love it. Thank you for your video!!

[@jamesjastrzebski1536]

This is an excellent instructional. Clear, easy to follow, and I really appreciate your explaining why you used this particular solution. Great work!

[@azpete6436]

Nice to see that the kit is now"plug and play". It was not in '18 and required tapping into the wiring harness. Also looks like the actuator and linkage has been improved.

[@RogerBarrera]

Awesome video! It definitely shows how much time and effort you put into this video. I ordered one from your link, appreciate the thorough tutorial. Thanks!

[@daveb7476]

This is one of my favorite mods. I ended up tapping into the rear door locks, so the hatch locks on a double click only. This will help with wear and tear, as well as, keep the noise to a minimum. The pop and lock can be loud, but the noise can be remedied with some sound deadener around the actuator. Thanks for the great videos. Please keep them coming.

[@ChloeKuo]

Nice! I had never thought about tapping into the rear doors, but that’s a great idea!

[@ngallop]

Hi Dave this was my thinking. I haven't installed yet. Are you aware of any instructions on how to tap rear vs drivers?

[@daveb7476]

@@ngallop There are a few threads on tacomaworld and a Taco Twonz video on how to tap into the passenger side door. It may depend on the year of your Tacoma as to the specific wire colors. I would bounce any info you find against your model/year wiring diagram which can also be found with a quick Google search. All the best.

[@ngallop]

@@daveb7476 thank you Dave. It looks like twanz does have a video here. kzbin.info/www/bejne/m5nMhGt-i7mFocU I believe the new pop and lock comes with harnessing for plug and play. Thank you again.

[@javis1873]

Hey chloe, nice video! Its a very useful mod which i did on my 2016 tacoma, i bought an unbranded motor though and its working great for about 3 years now, one hint for everyone and even you, i did the wiring on the passangers door so the actuator isnt locking and unlocking everytime you step in or out of the truck, only difference is you have to press twice on the key fob to unlock the tailgate. Keep up the good work!

[@rildain76]

Man, that’s a great idea. Wish I would have read this before I ran the harness all the way past the fuel tank. That was a serious pain in the butt. 😢 Update: I undid all the work to run the harness to the driver’s door and rerouted to the passenger’s door and then the Pop&Lock actuator wouldn’t work. Now I wish I hadn’t seen your post at all, lol.

[@rildain76]

***WARNING*** ***WARNING*** Running the Pop&Lock harness down the passenger side and connecting to the passenger door harness DOES NOT WORK.

[@russadams7744]

I don't have a Tacoma. I have a 3rd gen Dodge Ram 1500 and this is something that I would like to have on my truck. I like watching your videos. Keep up the good work.

[@Archifx]

I really do love all of your videos. I have been doing the KZbin thing for over 10 years and what an awesome approach you have to your edit and explanation. Really fantastic job. Loved your SUSP Lift vid on the Taco as well. Keep kicking ass from a fellow youtuber!

[@ronwaterman3335]

Just installed mine. This video definitely made it way easier. Thank you!

[@stevetoeniskoetter7000]

Thank you, your video was very easy to follow and made the job simple. I want to comment on the tailgate wiring harness and body wiring harness. My truck is a 2023 Tacoma double cab (4-door) with 5 foot bed. I didn't use the tailgate wiring harness. The body wiring harness was long enough with about 8 inches to spare. This way I didn't need to have the two harnesses connecting under the truck.

[@hike2024]

Just ordered this. I only cary my key fob with me (My MESO minimalist key fob as you have), so every time I need to open my tailgate I have to get my key out of the console. Your video is very detailed, and will be very helpful when I do mine. Thank you.

[@RonFrost-f4d]

Chloe I love your videos thanks for making it easy I just want to make a little safety note I’m an electrician by trade and we don’t cut the wire ties because it leaves a razor sharp end we take pliers and twist the tail off so it doesn’t cut

[@Timmytom16]

This should be one of the FIRST mods you should do for your Taco! I love mine!!

[@andrewv9980]

Awesome! This was the review ive been looking for! Very informational, and SHOWING everything you need and what your doing is the biggest help! Thanks you!!

[@lanspc]

The manufacturer's website was no help. This video was pretty darn good and saved me a lot of frustration. Thanks!

[@Nick-ji9ii]

Thank you for this video! Made installation super easy and smooth. Really impressed with the lock so far

[@shawnc3030]

Great job on your install! I went with the OEM tailgate lock and watching your install made me glad I did as I prefer the OEM.

[@plinker2268]

This is a really helpful and insightful video, thank you. Think I will take this on myself after watching. However, whoever designed the tailgate panel with different sized fasteners deserves a medal, but not for anything logical.

[@kitop310]

I went with the “OEM” kit, since it wasn’t back ordered. Only complaint is it was a royal pain to get the wiring connectors through the grommet hole. But then afterwards, having a beer, it dawned on me: “Hey dummy, should’ve run them down through the floor instead of up from underneath, yeah it would’ve meant more wire pulling, but would’ve saved you a lot of cussing.”

[@desmondgarcia8630]

Beer is important!

[@SirLarryHorse]

This was my first mod for my 2021 TRDOR, went OEM and installed myself.

[@johart789]

They've improved that kit! I had to scab into the wiring on the passenger side. There was no harness. I like that a lot better.

[@richnichols9135]

Jo Hart, you are right. I had to do the same on my 17 about 3 years ago. The cost of the new kit has gone up, but probably worth it for the value added. Improved tailgate mechanism, tailgate plugs, and plug and play harness - all good.

[@makamakalena3464]

One of the best investments I made for my 3rd Gen.

[@kidamere2408]

you mean then taking the 5 seconds it takes to lock it with a key what a waste of money

[@makamakalena3464]

@@kidamere2408 a waste of your money.....not mine lol.

[@kidamere2408]

@@makamakalena3464 bruh you sepnding my money again, we have talked about this.

[@patrickwade3150]

@@kidamere2408 very convenient if you have your hands full, either touch the door handle or just the button on the fob. Plus you want to make sure everything is locked as you walk away, hit the button again.

[@arthurtsang7936]

Thanks! Just installed mine. I was following the instructions but after step 3, I was like, let's just ask chole. Although it took me quite a bit to find the grommet to get into the cab (my tacoma is of different year), everything else is a breeze following your video. Thanks again. Love your videos!

[@rildain76]

Took me a little while to figure out the grommet thing too… question though: what’s the proper way for passing the harness through the grommet?

[@DIMITRY8]

Great video as always, but I paid $137 shipped for the OEM kit from the dealer which includes heat shielded wiring harness. The deals are there, you just have to invest time looking for them.

[@jareddodge8813]

It’s nice that it works with your factory key fob i thought I was going to have 3 key fobs 1 for the truck another for my remote start and one for the pop and lock that’s why I didn’t get one

[@MrGawainX]

Good video which gave me a pretty good idea of how to do this, I'd definitely say that routing it around the gas tank was the biggest challenge, there's a 18" or so segment I had to use a fishing tape reel to get the cable through.

[@miamitreasurehunter]

Chloe. Thanks so much for this detailed video. Too a while to find the right plug to use for the harness, but my Pop a Lock is in and working! It feels so nice to know when I lock my 2022 Tacoma SR5 the tailgate also locks. You Rock!!!

[@homesbyjeffblack]

Thank you for the great video. I ordered a kit and just finished in stalling it. You made it look easy and it was. Great Job!

[@boom-bf6wo]

Awesome video, and you made the install look easy. The amazon link doesn't work, but I'm sure it can be googled. Glad I stumbled on your channel - I'm now your latest subscriber!

[@MRLEE-of5fj]

Installed one on my kitchen fridge today!

[@GATORADDAM]

That's gotta be the best comment ever!! My f*cking ribs hurt! Hahahaha.

[@beaviskornholio2754]

You are one brave woman. I would never mess with my vehicle like that until the warranty runs out. Another nice and informative video. Looking forward to your maintenance videos hopefully in the future.

[@Jason56B]

Theres a DIY version you can look up. Bought the lock motor off ebay $9 for both motors shipped. There are hundreds of people running the DIY setup. Had mine for about 3 months and still working great plus i still got an extra motor in the side

[@chrisshaw2754]

Yep. I did mine two years ago and spent 20 bucks on parts. Still have the extra actuator somewhere.

[@ChloeKuo]

Nice! I should have checked out that option

[@johnyoung5482]

Can you provide a part number or link? Thanks

[@franci8766]

Just wrap up installing the OEM on my 2016, works great. Pop n lock was my first go to, but something about the mechanics and install that needs splicing that kept me from committing. Glad toyota decided to make this plug and play tail gate lock add on available and backward compatible to pre 2019 tacomas. Plug and pray is not exactly my idea of an ez DIY.

[@franz7671]

That was one of my first mod last year.....you need to get the front camera too...good whe you can't see over the horizon..and remote start too!! Love your vids!!

[@53thumper]

I installed the Toyota tailgate lock system. super simple to install, it runs up the passenger side of the truck and plugs into (plug and play) the wiring harness behind the right side lower kick plate cover. The cable harness even has heat insulation on where it passes over the exhaust system.

[@IzaguirreC]

Did the same with my 2020 trd offroad. Easy to install and genuine part.

[@haroldjackson6848]

She runs her wires down the driver side. Can you also run it down the passenger side?

[@Barracuda-r7s]

Thanks for the straight forward video,with clear instruction and tips. It is important for me to make sure I locked my Taco’s tailgate. Co-worker has his stolen last year to replace is ridiculously expensive. Is there anyway to theft deterrent that just in case ?

[@phillipmarlow5267]

I had mine installed at the dealer, but I didn't realize this was so easy to install. It's nice to have a secure rear box with the tonneau being locked too.

[@destinowalfar9053]

how much did they charge at the dealer?

[@phillipmarlow5267]

@@destinowalfar9053 Sorry, can't recall. Had it done on a factory order vehicle.

[@jerrystark3587]

Nicely done. I think I am going to follow your example for my 2022 Tacoma. Many thanks!!

[@johnyoung5482]

Link to Amazon says doesn't work for 2022

[@jimecee]

First, this video is the only reason I was able to install this myself, thank you Chloe. Also I’m learning that anytime a KZbinr says “this is the tricky part” is code for “good luck this is going to be a MF’er” lol going behind the gas tank and through the frame was miserable and I see why you didn’t film it 😂

[@tommywallbanger]

Chloe you have so many cool mods on your Tacoma. Off the top of your head, about how much money do you think you have invested in your Taco. I'm on the other side of the spectrum. I have a 2003 SR5 4x4 2.7 liter Tacoma that I bought for $10,000 about 10 years ago. I had to replace my 5 speed transmission and I've added Rancho 9000 shocks. Other than that, it's pretty stock but I still like watching your vids.

[@tein7270]

I always wanted a pop n lock but toyota came out with their oem version recently so i opt in for the oem. I can say that it works with all model with keyless (currently on my 2018). The oem one is definitely sturdier and quieter compare to pop n lock

[@cosmobalderrama4419]

How much was it?

[@tein7270]

PK3B6-635JS0 is the part # for the short bed model 2016 and up.

[@desireevillanueva575]

Yes, like the OEM better!

[@franci8766]

It's a premium cost over other non oem, but it's well worth the extra few bucks for better quality, smoother and quieter operation.

[@chrisshaw2754]

Francis Kun 😂

[@wilfredperez4775]

You really helped me install my pop and lock. You are awesome

[@NekBodesh]

There's so many key marks on the tailgate from the previous owner of my Tacoma. This video definitely makes me want to install. You made it look really easy!

[@mrallen609]

I bought the manual version before I saw this video. This is cool but not worth the hassle although she makes it look super easy.

[@fskrisfx]

I’ve been wanting to put one of these on my truck for a while now! 👍

[@MrJdh567]

Some 21 Tacomas are starting to come with remote tailgate lock installed. Toyota part PK3B6-35JL0 if you want to add it to a 3rd gen with a key fob.

[@buffalo241]

Yep, My 2021 TRD Pro came with one.

[@90FirstGenPGT]

Got the 2021 trd off road manual. Mine did not come with it :(

[@samesame620]

Installed PK3B6-35JS0 (short bed) on my 2020 Pro, super easy!

[@desmondgarcia8630]

I can't keep up with your mods I lovem keep em coming!!

[@stevensrspcplusmc]

I laughed, when you said , it’s only 16 screws 😆

[@Icantseeme]

My friend brought up a good point about remote tailgate locks. Someone can break your window and unlock your tailgate and have access to your bed. But it’s sure way more convenient than locking with your key.

[@buffalobmf]

I mean i guess yes but if that happens they arnt going through your bed Necessarily. I had this happen before they didnt even go in the bed they just took everythinf out of the cab

[@ItsariJasco]

That was one of my biggest gripes about the tacoma. Well, aside of the sluggish power. But why wouldn't Toyota have just had that on the truck standard from the factory?

[@buffalobmf]

I never even heard of a truck that doesnt have a power locking tailgate. Unless it didmt even power door locks then yea id expect it to have nothing else power but i never had a super base truck that doesmt have power locks or even power windows

[@williamgiacona4240]

$$$$$$$

[@hickstu]

This is a great video. I just finished the job. Thanks Chloe

[@boydscj7]

Great Job and thanks for taking the time to show us all!!

[@Desert_Fawks]

@Chloe Klu, I know it's late but you should have insulated that wire going across under your truck. It protects it from damage

[@WFORacer]

We did the remote start and tailgate locking feature. Works with factory key fob.

[@3zm4rtin]

Yeah...did the OEM one also. Interested to see Chloe if there is anything you get with the Pop & Lock that you don't with the OEM?

[@TheDogDad]

Awesome job, I am sold! Thank you for the content. I'm sure my install will involve a lot more cursing

[@newttella1043]

I would add a bit of lithium grease on the Pop n Lock mechanism if you lives where it gets below freezing. That metal piece that moves during the locking/unlocking movement gets rusty and you might not be able to unlock it. This is bad news when you have a locking hardcover that can only open when the tailgate is down. Otherwise great video showing all the details.

[@christinapuglisi3607]

Love your videos! Am I correct that it looks like it unlocks with drivers door on first unlock? Thinking about installing on passenger side so it unlocks with passenger doors on second click.

[@davidnguyen7693]

Great video and mod! Keep up the great work Chloe!

[@RobertBenedon]

Great video. Made the install easy to do. Thanks.

[@Jesus44ish]

I love it the way you explain everything 👌👌👌👌

[@hdrfour]

Why do you keep making me buy "mods" such good information!!!! Great Video!

[@dmann1209]

Excellent tutorial and the installation kit looks doable.

[@RichEckstein-rz4mg]

You did a amazing job of explaining this!!!

[@amohvac27]

Im actually stuck between buying a Toyota Camry XSE or The Toyota Tacoma TRD Off Road. Do you recommend the Toyota Tacoma? If so, why? Thank you for these videos I just found your videos today 👍

[@ChloeKuo]

I like my Tacoma mostly for its reliability, safety, and off road capability 😊

[@ezekiel5170]

Love the Taco enthusiasm🤍 It be cool if it would open w/the remote🫶🏻

[@muddyh2o2init44]

Actually yes you can order the oem auto tailgate lock. They sell it for short and long bed Tacoma.

[@exaltedfox]

Thanks for this, I was debating getting the genuine toyota part, I also have a 19 TRD Off Road. But you made a good case for Pop and lock. My only question is how do you keep your truck looking like it came off the showroom floor?

[@ChloeKuo]

Clean it after every trail 😄

[@ME-ny6ix]

Nice work great walk through instructions

[@intergalacticchicano]

🤔 i have an Undercover tonneau which locks has locks but when i take it off it is pretty unsecured, added the hose clam mod. This is pretty cool, going you see if they got one for a gen 2.

[@danielduron6131]

Chloe how is this install working for you? Is it still working good?

[@mccringleberrydoritos2537]

Awwwe she said Makita gun, how cute ☺

[@johart789]

I love my pop n lock. One of the first things I did.

[@johart789]

@@TomASwift probably over a year.

[@michaelbrennan7148]

Thank you Chloe. Safe travels.

[@davidbrightbill7105]

Thanks, made my install easy. '21 tacoma

[@bricks-mortar]

(remote) "won't effect how manual key works". Hmm. So, if the "manual key" is in LOCK POSITION, will the remote key fob UNLOCK the tailgate? Just wondering works.

[@ryoung6725]

Jesse beat you to this lol. I bought my kit from Runnin 4 Tacos, out the door $121.41 after a coupon. Pretty much the same set up as yours except it runs up the passenger side, doesn't have a separate tailgate harness, and doesn't come with new grommets. Not so sure that's enough to get the same one you used. As always, love your videos.

[@MOJITO88]

I noticed that you did have a lot of cord to tuck after you finished. Is that because you have a short bed truck? I have a 2017 long bed Tacoma Taco.

[@JimmyMakingitwork]

Need to do this on mine, pulling the key out of the remote is a pita.

[@WJr_88]

Thanks for the information and install video!

[@luism9820]

Took me bit longer but worth it 👌

[@simpleman8264]

Great video Awesome job & mod I'm gonna have to do this now

[@johnsalsiri8030]

What does that tail gate harness control prior to you replacing it . Only asking because I’m worried to play with things when I’m still under warranty

[@SpencerHogg]

These look awesome, really have to get one soon for the Taco

[@SpencerHogg]

Ordered on amazon and the wrong one they shipped showed up for 2004 Tacoma’s :( have to return and exchange it

[@isamora4685]

Wow you're impressive on what you do

[@brianbooher7138]

Does it unlock like all the doors when you put the truck in park? That way I don’t have to turn my truck off when I want to load something?

[@moiihrndz]

Hey so did you ever progress on your bed light LEDs? I know since you dont have the cover now it's probably not that important. Would you mind an update on it?

[@JacqueDuck]

Great, you Need to Add the part # 66140A for the installation of the struts to install the system for Any Toyota Truck. Grumpy Old Vet👍

[@jeffreycuellar241]

Haha, that’s news to me . My 20 taco tailgate locks when I lock the truck, I guess it was not an option in earlier models.

[@MyF1Scuderia]

so now you have to have 2 key FOBS? the original key W/FOB won't unlock the tailgate, only the doors

[@ICanDoItMyself]

I went with the oem kit because it's plug n play