Toyota Tundra Remote Start Do It Yourself! Not hard to do. Takes little time. Save BIG $$$

[@billm4212]

I watched this video before installing the Start X unit in my 2019 Tundra. Everything went smoothly, thank you for posting this :-)

[@LukesJohnDeereGarage]

Thanks for the video My StartX kit is on the way for my Tundra and it's great to see the process outlined.

[@DadsGarageDIY]

Very welcome! There has been a lot of activity on this video lately. Maybe the cold weather??? I appreciate the kind words. Hope to hear from you after the install and on other videos.

[@LukesJohnDeereGarage]

@@DadsGarageDIYVery possible!

[@mohamedboussetta8127]

Hello link please from where u order because unavailable in amazon thxxxx

[@DadsGarageDIY]

@@mohamedboussetta8127 www.amazon.com/Start-X-Remote-Starter-Toyota-2018-2019/dp/B07P1NDL1W

[@armandocardenas6472]

Best video on how to. Thanks man because of you it was a clean and super easy.

[@DadsGarageDIY]

Really appreciate that Armando. And really glad it helped. I have other Tundra content. If not subscribed I hope you will. Really appreciate it.

[@monetsengnalivong6471]

i jus got mine gonna install in the morning cant wait ❤😊

[@DadsGarageDIY]

I think you’ll like it. Ours is still going strong.

[@matthewbarber3153]

I sent mine back, it worked 50% of the time

[@DadsGarageDIY]

That’s disappointing. Did you get another or just forget about it?

[@matthewbarber3153]

@@DadsGarageDIY gonna try out the 12 volt solutions

[@DadsGarageDIY]

@@matthewbarber3153 Cool. Let me know how it works. I did this over 3 years ago now. Works about half the time for me but 100% for the wife. I almost never drive it so I think I just don’t get the timing one the 3 clicks right. I look forward to hearing back about the one you try.

[@marionlenoir5629]

Great video...appreciate how you guys went into detail on removing the trim panels and elaborating on the few issues you had difficulty with i.e. the actual start process.

[@DadsGarageDIY]

Thank you for the kind comments sir. I just filmed another Tundra video yesterday. Should have it out in a few days. Please subscribe if you have not. I appreciate you.

[@tolispoulos5398]

I really appreciate your video, I just installed my car starter! Thanks to your step-by-step instructions it was very easy.

[@DadsGarageDIY]

Thank you so much for the kind words. Glad it was helpful. I have more Tundra content on the channel. Hope something else there is useful too. I would appreciate you subscribing if you are not already subscribed. Thank you so much.

[@tolispoulos5398]

@@DadsGarageDIY done and done!

[@DadsGarageDIY]

@@tolispoulos5398 Thank you so much. I really appreciate that!

[@SmokingDeWalt]

Great video with step by step instructions! I just bought a 2020 Tundra. A little secret that a lot of people don't know is that most late model Toyota cars and trucks already have remote start from the factory. Press the lock button twice and hold down on the third press. It's a little tricky getting the button press timing down. It works on my 2020 Tundra. Mine has push button start, not sure if that makes a difference or not. Thanks for the video.

[@DadsGarageDIY]

Thank you so much. And yeah, our Tundra did not have that function. But, our Camry does. But, it's extremely annoying. The car shuts off as soon as you open the door. So, you yet again have to start the car. Great hearing from you. Thanks so much!

[@SmokingDeWalt]

I agree, it is annoying. Whether i use the toyota app or the key fob, the truck shuts off when the door is opened and only runs 10 minutes. I love my Tundra but question toyota's thinking on some of their engineering. ​@DadsGarageDIY

[@DadsGarageDIY]

@@SmokingDeWalt Yeah. It is really really annoying. I have no idea what they are thinking on this. I have never had a car with remote start before that does this.

[@mariosanchez8875]

Thank you so much I was gonna take mine to the dealership thanks to your video I saved myself a lot of money great great video!!!

[@DadsGarageDIY]

You are very welcome Mario. This is exactly why I did it myself. I had never done it before but saved a bundle and it was worth the time. Glad it helped. I have more Tundra content on the channel too. Hope you find it useful. Please subscribe if you have not already. Thanks again.

[@bobbypeaks3399]

Thank you for the video, great job, and you did a very good job explaining all of the steps

[@DadsGarageDIY]

Thanks Bobby. Glad it was helpful. I really appreciate that. Hope you will subscribe if you are not already. If you go to my channel page you will see the playlists. You will find one for Tundra if you want to see the other Tundra content. Thank you again.

[@bobbypeaks3399]

@@DadsGarageDIY Yes I will do that, thank you

[@DadsGarageDIY]

@@bobbypeaks3399 Thanks Bobby!

[@octavioplascencia9644]

Thank you I got it done and 30 minutes because of your video 😅

[@DadsGarageDIY]

Fantastic to hear! Thanks for letting me know.

[@TobyMoore-uk5se]

I have a 2014 Tundra double cab and I’m getting ready to install the start x remote start. I noticed on your truck you didn’t feed a wire to the passenger side tpms connector is that on the driver side in the 2019 tundra?

[@DadsCars]

So sorry Toby. I can't remember. This was 3-years ago and have no memory of it. Good luck. Let me know how it goes.

[@dbrhinoman]

I purchased one and installed it... easy enough to do, except that it doesn't work for the early 2010 Tundra. Come to find out you need a "G" key which corresponds to the type of ignition you have. I have a "dot" key so it didn't work... it doesn't program. My bad for not reading that in the description listed on Amazon. Support was helpful and quick to get back to me and was kind enough to explain the difference. I didn't realize there was a difference until now.

[@DadsGarageDIY]

Thanks for the feedback Dean. Do you have it all working now? If so, how do you like it?

[@dbrhinoman]

@@DadsGarageDIY I sent mine back and just need to order the Tundra 2007 to 2010 - dot key version.

[@DadsGarageDIY]

@@dbrhinoman Got ya. Let me know how you like it once you get it done.

[@joseheredia2716]

Great information. I like your version better than the introductions. 👍🏻👍🏻😂

[@DadsGarageDIY]

Thank yo so much Jose. Glad it was helpful. Please subscribe if you have not already. I have more Tundra content on the channel.

[@Rvas2695]

I heard that the truck shuts off once door opens from watching old videos ?

[@DadsGarageDIY]

Not with this unit. The factory installed may. I know our Camry does that. It’s so stupid.

[@Rvas2695]

@@DadsGarageDIY ok thanks ! Ordering one today

[@DadsGarageDIY]

@@Rvas2695 Very welcome my friend. Hope to hear from you on some other videos!

[@Rvas2695]

I installed the kit today and was fairly easy with the help of your video , thanks again !

[@DadsGarageDIY]

@@Rvas2695 Good to hear my friend. Look forward to the conversation on the next video.

[@garrettcipponeri9210]

Thanks for the video. Couple of questions. Once the truck has been remotely started from the outside of the truck, then i get in, do i then need to place the key into the ignition and turn to "on" position in order to drive? Have you heard of or experienced any problems with seat or steering wheel controls once installed and working? Do you happen to know the max range at which the remote starting kit works? Thanks in advance!

[@DadsGarageDIY]

Hi Garrett. Great questions. Yes you have to put the key in and turn it. Just to the run position though. If you go to far it will want to engage the starter. Learned the hard way a few times. I have experienced zero problems. This video is 3 years old. We still have the truck. My wife loves the remote start. It is a game changer for her. She uses it every day. Zero issues with anything since the install. I don't know the range. My guess is maybe 50'. It is certainly further than my 2024 Camry's factory setup has. Great hearing from you!

[@TruthTactical]

I’ve got a sneaky suspicion this will be your new #1 video. 😁. I just bought a 2016 Tundra Crewmax. Could you do any videos on 4x4 maintenance or just a general overview on all things that a Tundra owner needs to maintain? I know that’s a big ask, but you seem knowledgeable in this. Greetings from GA! 🍑👋🏾

[@DadsGarageDIY]

Thanks so much for the kind comments! Really appreciated. We just have the 2wd. I will get into more maintenance on the Tundra. But, they will probably come a little slow because of 2 things....We don't put a lot of miles on ours and Toyota's just don't break. But, I will keep them coming as available. Thanks so much Truth_Tactical.

[@TobyMoore-uk5se]

Turns out I did have to run a wire over to the tpms sensor that is under the glove box and plug into it. FYI.

[@DadsGarageDIY]

Glad you figured it out. Thanks Toby.

[@jessejames1920]

I had to run a wire harness to the passenger side behind the glove box on my 2016 for the tpms. Nevertheless good video!

[@DadsGarageDIY]

Thanks so much Jesse. Please check out my other content including several videos on the Tundra.

[@Eddiemoney193]

New subsriber to your channel, do you have any updates, have you had any issues 2 yrs later?

[@DadsGarageDIY]

Thank you Eddie. Please check out my car channel too. All new car content gets posted there. I do have new Tundra content there and more coming. No issues 2 years later. Still going strong.

[@Eddiemoney193]

Good to know, thank you!

[@MrThunderChicken]

Does it have a cut off time? Or will it stay on as long as you want?

[@DadsGarageDIY]

It will shut off after about 10 minutes. If you put in the key and put it in run it will override that and go back to normal. Great question Ramiro.

[@adamwelchman3728]

You said it shuts off when you hit the brake. So do you need to restart manually again once you want to put your car in gear?

[@DadsGarageDIY]

Yes. If you shut it off like that.

[@adamwelchman3728]

Can you make it to where it doesn't shut off if you touch the brake? Thanks for your reply and video, btw.

[@matthewthomas6968]

I’m having issues with the programming on my 07 tundra. I am pretty good at following directions and and somewhat mechanically inclined but I’m on my second unit with zero luck on programming. ☹️.

[@DadsGarageDIY]

Well shoot. Have you tried their tech support?

[@lcotto2064]

Hey Dads Garage. How's the remote start been holding up? Thanks

[@DadsGarageDIY]

Still as good as the day installed. Can’t remember when it was installed but certainly more than a year.

[@bersonlee]

Great video! Will the AC/heater kick on if you left it on before?

[@DadsGarageDIY]

Yes. It will work exactly as you leave the controls when you left the truck. For instance if if will be cold in the morning you can leave put the heater in the on position and it will be heating up the cab while it is running. Exactly as if you started it with a key you just don't have to walk out to it. Great question. If you have not subscribed I hope you will. I have more Tundra content and more to come. Thanks Steve!

[@bersonlee]

@@DadsGarageDIY Thank you!!!

[@DadsGarageDIY]

@@bersonlee Very welcome Steve.

[@chandlerflorence8557]

Does this work with an 04?

[@DadsGarageDIY]

It doesn't. This one fit 2018-2021. But I checked their website and they show they have one coming. Here's the link remotestartx.com/2004-toyota-tundra-standard-key-remote-starter/

[@Abdul-mh5zh]

Mine works first, then it just cranks without starting did you have that?

[@DadsGarageDIY]

Not at all. Ours is a little weird. It starts every time for my wife. For me most times I have to try 2 or 3 times. I think it may be a little picky with the timing between clicks. She just nails it and I am all over the place. LOL. Good luck with that. I would call the company. Certainly they have seen this happen before.

[@Abdul-mh5zh]

@@DadsGarageDIY I believe something wrong with the starter module, looks like is not sending power to the engine, cuz while it's cranking if I insert the key the truck starts. I already contacted them waiting for help. Thank you 🙏

[@DadsGarageDIY]

@@Abdul-mh5zh Let me know what they tell you. Look forward to hearing what’s going on.

[@Life1233_]

Does it shut off once you open the door?

[@DadsGarageDIY]

No. It keeps running for 10-minutes. Then if you don’t put the key in and turn to run position it will shut off. Great question Dude.

[@T3mbleque]

Does it still work for you? I am thinking of buying it for snow days

[@DadsGarageDIY]

It does. I think this video is now almost 2 years old. Still working as good as the day I installed it.

[@Mrdubomb]

I wonder if you can get an aftermarket remote with one touch remote start, I cant see my fob lasting too long if I have to press the lock button so many times.

[@DadsGarageDIY]

I installed this 10 months ago. Still on the original remote battery and this is a 2019. My wife uses it every day at least once. I know there are other kits out there. Some of the once that places like Car Toys installs my be nicer. Not sure. But, this one is working perfectly for significantly less money. I really appreciate the comment. Do do hope you will subscribe and check out some of our other content. We have more Tundra content on the channel and more to come.

[@mikeleathead6579]

You've had it installed for a year now. Have you had any issues?

[@DadsGarageDIY]

Great question Mike. No issues at all. Still going strong!

[@mikeleathead6579]

@@DadsGarageDIY Thank you!

[@DadsGarageDIY]

@@mikeleathead6579 You are very welcome Mike. Hope you do check out some of the other Tundra content. Thank you sir.

[@mr.c493]

Will this work on a 2018 Toyota Sequoia?

[@DadsGarageDIY]

Hi Mr. C. Sorry for the delay. I had to do a little research. It appears they do make one. Here is the link to it. remotestartx.com/vehicle/2018-toyota-sequoia-h-key-remote-starter/

[@mr.c493]

@@DadsGarageDIY I saw it but I can’t find it on Amazon. It keeps showing up as the tundra kit. I think I’m going to order it and try it. It should be the same. Thanks for the reply.

[@DadsGarageDIY]

@@mr.c493 I can’t imagine it being different either. I have always looked at the Sequoia as a Tundra SUV. Good luck with it.

[@mr.c493]

@@DadsGarageDIY got the kit, and installed it myself but I couldn’t find the TPMS plug. It’s different on the Sequoia. I can’t seem to find anywhere where the tpms plug goes. If you have any suggestions please!! Right now I can just start the car, and I have to unlock it it’s the key and I can’t turn it off with key fob.

[@DadsGarageDIY]

@@mr.c493 Hmmmm. I would call them. Wish I had a better answer for you.

[@wildwillie6083]

They are built there.

[@DadsGarageDIY]

Thank you sir for the information.

[@JoshVlogsGaming]

Amazing

[@DadsGarageDIY]

Thank you Josh. Much appreciated!

[@davenelson3053]

Yesterday I installed this on my 2021 Tundra. Everything works great except I cannot unlock my doors with the remote. I have to put the key in the door to get in. Anyone have the same problem? Is there any way to fix this? Thanks for the video and your help.

[@DadsGarageDIY]

Hmmmmm. I hope someone has some inside on that. This has been quite a while ago. I remember I had a few little quirks during the install but can't remember what they were. Hope someone can help. If not, call the company and see if they have some insight. Good luck Dave. Please check out my other content including more Tundra stuff.

[@enriquebaquerizo2100]

I have a 2020 tundra limited that I use my key fob to start vehicle your vehicle should be the same I don’t have a after market remote starter same process lock button 3 times at third time hold lock button down

[@nathanb9174]

The 2020 and newer trucks require wire splicing and slightly different use of the TPMS. You have to look at their website for details.

[@DadsGarageDIY]

@@nathanb9174 Great info Nathan. Really appreciate it.

[@Idiocracy.is.now.]

You have to splice into the TPMS.. you can't use the T harness.. reach out to startx support and they will tell you the same thing..

[@patrickbarrera3377]

Good video. Thanks

[@DadsGarageDIY]

Thank you Patrick. I have quite a bit more Tundra content too. I would really appreciate it if you would subscribe (if you haven't already). Thank you so much. Much appreciated.

[@dbreeden5553]

1/3rd of Tundra's made in Texas are then sold in Texas.. but there is a tundra plant in Indiana too. So Texas does not have 1/3rd of Tundra's sold. Not even close

[@DadsGarageDIY]

I just read that since 2009 every Tundra was made in Texas. As far as 1/3 of Tundras being sold in Texas. Well, just before filming this I had read an article that stated that. Are either of these statements true? I don't know. It's what I read. Doesn't make what I read accurate. Both things do make sense to me. As I have seen both in several different publications. Again, doesn't make it correct. We could all be regurgitating inaccurate information over and over.

[@powertoolexpert6999]

$200 for this is way overpriced

[@DadsGarageDIY]

Is there something better out there? I thought the price was very fair.