Toyota Yaris 2005 to 2015 how to remove factory radio & fit double din radio

[@tonyw9334]

This is so helpful. I'm pretty good at DIY, but would not have attempted that job without seeing this video as had no idea how a Yaris dash and original stereo was even fitted. You made it really simple - and great hints about protecting the dash when taking out the radio and not losing the screws etc. Thanks so much - you're a star!

[@henrygroover829]

I really like the way you explained everything step by step, and pointed out all the little pitfalls. It's unfortunate that the 2008 Yaris 4-door base model sold in the US (which is also called the Yaris sedan, and may not be available elsewhere) is quite different - I'm expecting that the Android Auto head unit I've ordered is going to need some cutting to fit. Some of the differences in the version I have: * There is more space between the A/C vents, and the emergency flasher switch is between them * There are no knurled wheels to adjust the vent louver angle * There are three knobs on the bottom section of the fascia rather than 1.

[@komajimmy]

This video is very helpful because of well you explain everything and why you do it. How not to scratch it, and carfully install everything. This video makes me confident I can replace my own stereo and not destroy any original parts. Really good work!

[@PeaceAMust]

I'm so slow 🐌 but after watching this so well explained video i know feel very confident and excited to crack on. Many thanks for your superb work.🙏🏼

[@kennyc3670]

Good installation video. Been nice to have seen the radio working with all its functions and original connections to the steering wheel and fascia controls.

[@thelambsauce7223]

Someone wanted to charge me 300 dollars for this. Haha! How about 45 minutes of my time and some elbow grease instead. Jagoff.

[@BigManBazz]

Literally exactly what I needed and uploaded only a few days ago! Nice one mate, cheers!

[@J_Alrighty]

This is a great video. I just did my own and couldnt have done it without you. The only thing I would add from my own experience (2007 Yaris mfg in France) is that the plastic around the speedometer comes with the stereo when you do it in these steps. No harm when i yanked it all of together, but i suppose the speedometer plastic should technically come off first and back on last.

[@heinrichvoigt4945]

Hey mate, u rly nailed it. Great and kinda professional video even for dummies. I could almost swear u didn’t skip any critical thing or forgot about any necessary comment. Thx for being pro!

[@briton3851]

That’s the best instructional video on KZbin

[@GiorgosCY]

Very good instructional video, especially with all the clips that I would've probably broke if I hadn't seen this video. The steering wheel controls dont work now unfortunately, but its easy to change the volume with the radio knob.

[@christinafacts444]

Thank you! I accidentally pushed the heat dial all the way into the dashboard. Popped right out after I got the radio panel out. A bit of glue, and now I can use the AC dial again lol.

[@markdivinagracia6728]

Great videos.very helpful.Could you give links to the parts that are replaced?Thank you from philippines.

[@Yottabit_]

Thanks for showing this process my man. It was super helpful and informative.

[@ceremonious_houseplant]

Excellent video, very clearly explained every step of the way. Thanks!

[@AbzRaz]

Hi, thanks for this great informative video! One question, the extra plug you didn't use from the wiring loom, is that for steering wheel controls?

[@meowjestix]

Omg thank you so much!!!! Your tutorial was super helpful. I just have sore fingers now

[@map4195]

Very well explained, makes it very easy for us diy’ers. Thanks

[@mischek794]

A very simple and good job thanks , but I wanted to ask in terms of connecting a subwoofer, what do you do ?

[@chrish116]

helped and saved me £100 fitting lol cheers dude

[@frankford4752]

Great video! Extremely clear. Just wondered, can you use the wheel controls to operate the replacement head unit, or would I need an additional adapter for that?

[@PJsprojects]

You would need an adapter that matched the make of the aftermarket radio.

[@lindalouisewhitear6244]

Brilliant video, & so easy to follow. I’ve a 2008 Yaris, same factory unit, that I’m replacing with a pioneer cd Apple play unit. As I currently have steering wheel controls would I need to buy connect 2 SWC adaptor for the pioneer, as well as an ISO fitting harness, along with the replacement facia kit? Many thanks.

[@domp4902]

Hi PJ, great vid, thanks for posting! Is there an adaptor available to keep steering controls working? Many thanks Dom

[@DanRobards]

Very thorough video. Many thanks!

[@AT-ex8dx]

I have done everything you explained. Thanks, but one more question how can I find your parking brake wire on bypass park break wire, please

[@PJsprojects]

Just connect the radio parking brake wire to the black earth cable, this will bypass it.

[@IncenderyLemon]

thanks for the video! incredibly helpful and well explained

[@sluamhamid5603]

Perfect . Ok what modle number of pioneer player . I need only 1 last thing to order

[@mandelamoses3631]

Great job there, I happen to have the same car and would like to change the radio, how could I get those very parts you used? Thank you

[@DanielSilva-uh8is]

Hi! I know this video is from 2 years ago but it’s still helpful. I have a Toyota Yaris from 2007 and I did all the installation of my 2 din radio based on this video. However my new radio doesn’t have the same hole for the screws than the steel plates… therefore I can’t finish it… with the box came 2 other plates but I can’t seem to understand how to do it anyways…. Could you help me please? Thanks a lot!

[@qaisniazi3793]

Hi could you please tell me what is the radio model number for pioneer. Thanks

[@zackahmed2968]

Hi mete its very helpful explanation what about steering control is this work with this mathed

[@harwoods11]

Hey.. Nice video So, would you consider it a better / cheaper option to replace the single din unit for a double din in order to get apple iPhone to work hands free / stream music etc? Otherwise I'm looking at a Parrot or Bury hard wired kit??? Yaris 2007 with SWC 👍

[@matbedford6261]

How did you find the fit an finish of the facia kit? I've heard people say the silver colour is way off the original and that the trim doesn't sit flush?

[@luku84]

Hello, are the steering wheel buttons are working well, is non factory radio is compatible with them?

[@baldvale5418]

6:49 Please can you help me ? My Toyota Yaris 2009 MK2 stereo does not have the usual Aerial socket like the one in your video. My stereo only has the plastic connectors and this is confusing me as i have bought an inline aerial amplifiyer which i can't fit as i don't have the usual aerial socket in my car radio. On all the yaris car stereo's that i have seen on youtube they have the same connections as the one in your video.

[@tombuckley2952]

what is the radio model you have fitted in this video?

[@kieranfrench666]

So you lose all of the console controls? Just use volume up and down on the steering wheel?

[@Jj-xj6no]

THX FOR YOUR VIDEO...DO WE KEEP STEERING CONTROLS WITH CONNECTIC ISO HARNESS TOYOTA CT20TY01 PLEASE ?

[@PJsprojects]

No that one does not work with steering controls. It's just for aftermarket radio fitment power and audio.

[@kaotarks9685]

You save me bro thanks you 🥺👌

[@Vindiola84]

Is the power in the blue connector to turn on the radio? Can you tell me the order of cables to turn it on?

[@Sunitakumari-lk2oo]

can you please provide the link to the aftermarket radio? I bought one from amazon 7-inch but turned out to be small. I have a Toyota Yaris 2009. Thanks.

[@valerietmbianyormomo2028]

Thanks for the video, please where can I get those tools I will like to put such in my car? Thanks

[@PJsprojects]

I would try Amazon or EBay, if that’s no good local car shops should have what you need.

[@lucaomodei6960]

amazing video! I have a question: what should I do if the light of the airbag and belt security stops working? I’m sure the car was off when I managed to change the radio.

[@PJsprojects]

You will need it reset with a diagnostic device. Most garages should be able to sort that.

[@frankevlihan1]

Great assistance many thanks! Greatly appreciated

[@jeremyxiong5666]

cheers mate absolutely perfect video

[@matejciganik7652]

Hello, i bought 2din to Yaris 2010 but remotes on steering wheel doesnt work, i dont know why, do i need some adapter?

[@jimthreapleton]

Superb vid, really methodical and clear. Looking forward to completing the job myself. :)

[@AS-f20]

I have installed a pioneer 700 series on my yaris, but I don’t have the steering controls anymore. Is there anyway to have the controls back?

[@zachos138]

Thanks for the video! May I ask what is the 4 screws size and type?

[@PJsprojects]

I think your referring to the size 2 crosshead ones.

[@r7bkr]

Such a great, simple, easy to follow process. Something I wouldn’t have attempted if I hadn’t seen this video, so thank you. 👍 My step daughter has just bought a 2010 Yaris and we’re going to look at getting her a new head unit. So can I ask what the details are of the head unit you have fitted, specifically the size screen as I have done a search and there are ones that are either 6.8” or 7”, and didn’t want to get one that was too big or too small. So any help would be appreciated.

[@PJsprojects]

That particular head unit is no longer made but when at the retailer just ask for a double din size radio. This is an industry recognised size.

[@r7bkr]

@@PJsprojects - Thank you, :)

[@archie6593]

Did you plug the iso wire pack straight into the new unit or did you plug it into the wire pack that comes with the stereo first? Also, on another video you discussed the pioneer sph-da230 unit (I’ve just ordered one). How do I install that green handbrake cable so it is legal on a Yaris like this one? Thanks :)

[@PJsprojects]

Some Yaris models are on what is called ISO connections and so plug directly in to the wire that comes with the new radio,some however require an adapter cable (see example below). As for the green wire you will need to connect it to the earth wire at the base of the handbrake,you should see a push on spade connector after removing the trim and carpet,test this is a earth with a meter or test probe and crimp or solder onto that cable for your switched earth. www.ebay.co.uk/itm/Iso-Din-Cable-Adapter-Plug-Car-Radio-Suitable-for-Toyota-Highlander-Kluger/202916886587?fits=Model%3AYaris%2FVitz%7CCars+Year%3A2010&hash=item2f3ec9f83b:g:jpsAAOSwE9RbRGMe

[@EdRandall66]

1. Disconnect the battery negative lead - will also avoid any inadvertent airbag problem right?

[@PJsprojects]

No need but don’t put ignition on with airbag light disconnected.

[@jonaytrujillohernandez3499]

Hello, is there any trick to take of Air bag switch, i mean not unplug, avoid go to garage...thanks!!

[@marekboda3918]

Excellent job and video, thanks. Parts list please

[@nicksanchez4146]

Help! I’m trying to find a video on removing the lower lower trim panel to gain access to the cigarette lighter panel. My cigarette lighter no longer works so I’m installing a 2 port usb 3.0 power source to charge phones. It will be wired directly to the battery. After watching your video, It looks like removing the stereo then the climate control knob panel would then give access to this piece. Can you confirm/deny?

[@nawazali93]

Hello very helpful video 👍. I have a Yaris 2008 , with exactly the same stereo. Looking to change it. Are you from Manchester, by any chance, maybe you could do it for me. Thanks

[@hardeepsinghtoor2355]

Please send the link where can buy this radio and other parts thnks alot

[@paulinakie4433]

Could you give several models of the pioneer screen? And size - as I would probably try to get something cheaper than Pioner. ( but I don't know which could fit into this face adapter. ) or I might get the same what you have in the video just need the model and check the price. Thank you

[@paulinakie4433]

I mean the size of the screen- which fit in to this facial adapter

[@PJsprojects]

You would need to ask a retailer or go in the Pioneer web site for the display size of what ever model is current as this one will not be made any more. This video is over four years old and I retired from electronics over a year ago.

[@paulinakie4433]

ok, thanks for the reply. @@PJsprojects

[@seanlynch2523]

can you do this on a toyota yaris 2000?

[@angelesworld3855]

Not sure if you d be able read this and reply. Could you be able to suggest a similar unit with reverse cam option. Regards

[@PJsprojects]

Pioneer 160 dab maybe? I would consult your retailer tbh.

[@JerkyFraser]

Please can someone tell me what type and size of screws I need to mount the stereo to the dash. It's four screws and they're missing on my car.

[@matija1511]

Hey do you maybe know where i could buy shorter side panels from your video i am buying radio from china and it covers upper front of side radio panels so i need just lower part like yours

[@ManuRyan007]

PJ you're a legend

[@sobaaniqbal9018]

What’s the name of the pioneer stereo?

[@soufianebelaiz6979]

Pioneer MVH-A210BT this one

[@NavjotSingh-em3mq]

Hi I tried to do same way . Spend money on . But I can't plug the switch at the back of the stereo i have only one clip at the back of stereo. Its the same stereo you are using

[@alexzanella9509]

Could we have a list of the parts like the fittings and the radio and the face plate? Do you think a novice could do this

[@Landogarner83]

I would say if you are not all thumbs you can do it. Tips: - check your radio that you have the same connectors as shown before buying adaptors. (mine has a completely different antenna connector that needs a wired adaptor too) - the "spare" connector is for steering wheel controls. So if you have those and want them to keep working you need an adaptor for that as well. (have not yet researched if those are available or have to be improvised) As for parts numbers those can change depending on the radio toyota used. - Radio: use any double din size radio with ISO connectors you like (the one in this vid is apperently no longer available) - Facia (face plate) CT24TY22 this number is silver. (should contain everything you don't scavenge from the existing radio) - wiring adaptors: use the one shown in this vid (if you have the same connectors as shown) or search "Toyota ISO adaptor" and compare the toyota side with foto from your radio.

[@shreypatel6535]

Would I have to get that exact model of radio or would the classic rectangle one work

[@IgnorantDonkey]

Hello the wire harness coming from the car has two different ports but loooed up the radio you Installed and it look like it only had one place you could put a plug in in this correct did you only use one plug instead of the two??

[@PJsprojects]

Correct.

[@IgnorantDonkey]

@@PJsprojects thank you for the response this helps

[@ronaldjimkhoza4468]

Hi is that radio a 7 inch or a 9 inch ?

[@zvski1316]

So what was the third cable for? The one you said „we don’t need that“…? Is it for the cigarette lighter?

[@zvski1316]

Cause mine isn’t working since then

[@zaydesa1735]

Please could you add a link to where you bought everything. And amazing video

[@PJsprojects]

Being trade everything is supplied to me in bulk. You would need to shop around for best prices.

[@moradsaeed7137]

Can you put the links where to buy them products

[@ZainAli-mc8oc]

2005 Toyota Yaris I forgot my radio code, could you please let me how to fixit?

[@AFishFaceProduction]

i see that the facia adapter is 2007> . unfortunately i have a 2006 and can't seem to find the right piece online' any ideas?

[@markthestark1]

www.aliexpress.com/item/33047233043.html?spm=2114.search0302.3.2.6fb62418Hd7tXU&ws_ab_test=searchweb0_0,searchweb201602_0,searchweb201603_0,ppcSwitch_0&algo_pvid=fb0ed851-bb4d-4a19-b2de-022cf0d0ec9e&algo_expid=fb0ed851-bb4d-4a19-b2de-022cf0d0ec9e-0

[@christiansyganiec6102]

So if I were to want to add and aux port or Bluetooth would it just be the same process

[@Isah305]

Great Vid. Can you help me? If you still have original radio that you removed, can you open it to check can Green light be changed in other color. For example Led white

[@PJsprojects]

Anything is possible but you would need to change the LED lights inside which would require micro soldering to get the job done. This is very time consuming and so unless you could do it DIY it would be pretty expensive.

[@speeddemontv]

Hi what make model head unit you used to fit in yaris, great video thanks

[@PJsprojects]

Looks like a Pioneer DA-130 but its three years old so that radio will be out of production by now. Check the Pioneer web site for the current year model.

[@joshmcmunn9820]

Thank you so much for the clear tutorial!! If you get a minute could you drop me a message? I’m trying to upgrade the stereo in my 2007 Yaris and just need a bit of a hand with what specific parts I would need! I’ve got a list of a few but just want to make double sure, thank you.

[@owaisn6095]

Can you send me the list please haha much appreciated

[@elijahmade8515]

My Toyota Yaris 2008 car radio is not working, what could be the fault?

[@nchia]

I’ve been baffled by that “spare” connector on the back of the factory radio, what the heck is that for?

[@erik6752]

Can anyone tell me if the steering wheel volume control is still working if u switched the radio?

[@cichibambosa3219]

I have a question, what radio are you using for this replacement?

[@PJsprojects]

Looks like a Pioneer from a few years back. They change the range once a year so suggest you ask a retailer for what is current.

[@carlsugden4587]

Do you know if the controls on the steering wheel still work after the upgrade

[@carlwilliams3488]

Not with the harness used here. Use the CTSTY001.2 instead

[@MrKenzoviski]

@@carlwilliams3488 very helpful, thanks

[@balage82]

Thanks for the video, it is very usefull and detailed. Can I you use the wheel control buttons to operate the replacement head unit or do I need some additional adapter for that?

[@tobyodonnell9353]

Usually you need an adaptor with the extra bit for the steering wheel

[@NK-vd8xi]

Does this still work with the steering wheel controls?

[@danamallah8297]

where do you buy those facings thing that fits the right size for ur car and new radio?

[@PJsprojects]

Try connects2.com

[@danamallah8297]

@@PJsprojects thank you!

[@ATruePrince]

Hi thanks for the video. I have steering wheel controls and I'm looking at getting a pioneer single din system. What do I need to do to make the steering wheel controls work with the stereo? And can you go into abit of depth as I'm going to fit it in myself 👍

[@muhammadrizwananwar9557]

Hi thanks for question i have the same question if you got the answer yet please do let me know

[@carlwilliams3488]

I’m going to be doing one of these in a few weeks and the 3rd connector that was just discarded in this video is the steering wheel controls. There is a connects2 harness that has 3rd connector, a box and an output for the new unit. The part number is CTSTY001.2 and replaces the harness used in this video.

[@ATruePrince]

@@carlwilliams3488 nice one, have you made a video of it?

[@H4Di]

Hello quick question what dimensions is the screen u got? Thanks

[@PJsprojects]

I’m trade so this was a random install from a while back. The screen size is double din.

[@MrLiveModz]

Hey . How would I make the steering control work. Do i have to solder the wire ? How do I connect that wire Thanks

Did you succeed in this? Thanks.

[@paolococo2]

Great tutorial! thank you very much!

[@marcokappaa]

Hi, I have a Yaris 2008 but the standard radio is not like yours, but the other things (air conditioning ecc..) seem to be the same...can I do the same things you did or does it change something? Thank you

[@PJsprojects]

Should have the same connection when it’s removed. Being in the trade I’ve done hundreds of them without any problems.

[@marcokappaa]

@@PJsprojects okok thank you for the quick response..if I can't do some steps can I ask you?

[@PJsprojects]

@@marcokappaa The video pretty much covers everything you should need, anything that looks different I would consult your retailer.

[@marcokappaa]

@@PJsprojects okok, just one last thing...do you have any link for the things you used?

[@PJsprojects]

@@marcokappaa Afraid not, I get everything in bulk via trade outlet.

[@Skrimzey]

Where can I buy that monitor and fitting

[@darkstriker267]

How big should the double dinner be

[@abdulmudhir4042]

might be a dumb question but how big of screen can I fit with that fascia? As I can't find any measurement for the screen wise.

[@abdulmudhir4042]

never mind, found the measurements

[@Lolpower777]

Does the Yaris have OEM footwell lights when opening the door ?

[@PJsprojects]

Not the models I’ve seen, but that doesn’t mean it wasn’t an option in some countries.

[@telios7206]

Great job there,so the line out to connect to the speakers and amplifier will be were

[@PJsprojects]

Yes your new radio will have a instruction manual detailing that the blue wire powers your aftermarket amp remote input and the new radio should have pre outs on the back to run your rca cables to the aftermarket amp for the signal. Your new amp should have an instruction manual showing speaker outputs that can then be ran to your speakers.

[@jamesnipu]

Which double dine i can buy?

[@zman5908]

Thank you

[@jeremyfreeman4829]

Wow, what a frickin' nightmare.... Toyota really makes this a Pain in the arse... My 1997 Toyota - Plug'n-play (no fascia, adapters, etc that I recall :P ). They have gone from 'easy to fix'/DIY Dream to proprietary in a generation.

[@dalin-dregrundmann9560]

Hi what is the name of the pioneer radio

[@cocacolaholic]

Top stuff this! Thank you