TPM Weaponsmiths MP5SD Suppressor Review

This is a quick review of the TPM Weaponsmiths MP5SD 12” Suppressor. This suppressor is designed for most SD clones, as well as an actual HK MP5SD.
TPM recommends shooting 124GR ammunition through this suppressor, as that is what the SD was originally designed and optimized for. Shooting subsonic ammunition could damage the suppressor, and does not enhance its sound suppression.
The suppressor should be cleaned every 200 rounds with a brush. Any cleaner is safe on this suppressor. Before reassembly, coat your baffles and parts in welding Anti-Spatter spray, to help avoid carbon build it. It also helps to coat your threads with white lithium grease to avoid carbon lock up.
Also, I don’t know how I didn’t catch the fact that I said “1.5 diameters in width” 😂 - Makes sense if you don’t think about it.
Here are some quick specs:
Length: 12”
Diameter: 1.5”
Weight: 14.15 Oz
Tube Construction: 6061 Anodized Aluminum
Thread Adapter: Steel
Endcap: Steel
Thread Pitch: M18X1f

[@PoormansMachineGun]

Love my TPM SD Suppressor! To anyone interested this suppressor can be used on a modified 9mm AR15 by having your local gunsmith chop, port, and thread your existing AR9 barrel to MP5SD barrel specs. It especially works well with a modified CMMG radial delayed 9mm system.

[@g.barrett8410]

Thanks for showing this suppressor in detail, best vid I've seen yet on the TPM design.

[@10_8guns6]

I greatly appreciate it, and it’s my pleasure.

[@KalashniKEV762]

Nice. I just got mine complete last week. I can't wait to take it out tomorrow.

[@10_8guns6]

You will thoroughly enjoy it.

[@Steve_MP5]

🔥🔥🔥

[@KevinMcMullen.]

How long did you have to wait to get the mp5sd from them? I am going on 10 months since I placed my order with them.

[@10_8guns6]

I bought it a few years ago, it was probably about 10 weeks.

[@ellijahsmith4445]

When you place your order so they give you serial numbers for the can and receiver so you can start the NFA process while you wait for the build to be done?

[@10_8guns6]

If you have it built as a pistol, that’s an option. I personally would not file ANYTHING until the firearm is complete and in hand, just in case it got lost/stolen in the mail, or shows up damaged beyond the point of repair. I had them build my SD as a two-stamp gun, so they both transferred on a Form 4.

[@KevinMcMullen.]

@@10_8guns6 I just got mine made a video about it on my channel. Does hour suppressor sit centered in the hand guard? I think the handguard on mine is crooked. Also my rear sight is adjusted all the way to the right is your also like that?

[@10_8guns6]

Mine sits center.

[@chrisliddle7049]

I just don’t see the value in this like a cheap solvent trap build