Tracker Grizzly 1448 sc?

Рет қаралды 10,027

Күн бұрын

This Tracker has been through hell, but its finally heading in the right direction. If you are going to get someone to weld on your boat please make sure they know what they are doing. Austin and I did 90% of this build in about 11 hours. Took another 4 to finish it up. You can look to see this again on the channel in a month or so.
Follow Tricked Tins on my other social media accounts for giveaways and special offers👇
bit.ly/TRICKEDT...
bit.ly/TrickedT...
www.TrickedTins...
Follow my videographer👇
/ ricomarcelophotography
/ ricomarcelophotography
/ _rico_marcelo
Follow SBFISHINGTV👇
bit.ly/sbfishingtv
My brother's company check him out👇
...
bremmyproducts...
bremmyproducts...
Tricked Tins Crew 👇
DruYoder with Yoder boats.
www.Facebook.com/yoderboats
...
Casey Bass With C bass welding.
/ @cbasswelding
/ cbasswelding
Simeon Terrell aka Sham4reel
/ @sham4reel764
...

Пікірлер: 69

@mikemasc5774 25 күн бұрын

Awesome Build. Where can I get a console? I have a 1448 that is ready to goto the next level. Thanks for sharing what you do!

@TRICKEDTINS 24 күн бұрын

I can build ya one, or look online

@joeyjoe8892 7 күн бұрын

Where are you guys located I got a 1448 also it's a 2004 it's a little bit stronger than the newer ones it has ribs it's an old weld I had a 2013 it just totally fell apart split everywhere was falling apart but on my 2004 I got a couple of loose spots like up in the deck that rattle I'm wondering if something can be done about that and if you do stuff like that

@TRICKEDTINS 6 күн бұрын

We are located in Norfolk Virginia. We can do anything you can imagine.

@joeyjoe8892 6 күн бұрын

@TRICKEDTINS in in Florida and where I live in Florida find nobody that works or does any kind of aluminum welding

@352508 Ай бұрын

They used that 3/16 plate because that’s what they had lol. Po people doing po people thangs….

@TRICKEDTINS Ай бұрын

Lol. They had enough money to buy that $600 hatch tho...

@jeffbrummette1622 6 ай бұрын

Sounds like you’re busting the owners balls over their welds! I love your work! Keep it coming Bro!

@TRICKEDTINS 6 ай бұрын

The customer bought the boat like that. He's not the one that welded it

@DavidFernandez-en2gl 6 ай бұрын

Why didn't you use a black storage bin from Lowe's to hold the fish.😂😂. You probably know where I'm going with that comment. Love your work 🔥🔥

@TRICKEDTINS 6 ай бұрын

Hahaha. This is trickedtins you must be commenting on the wrong channel lol.

@thomasrobey9851 6 ай бұрын

Austin needs to come back and start selling boats with custom packages! Sell em through a dealership or something!

@TRICKEDTINS 6 ай бұрын

I think austin is coming back full time! We have a bright future ahead of us. In the meantime i'm trying to wrap my head around everything going into your extravagant build! Project X video dropping next week!

@txg1275 6 ай бұрын

@@TRICKEDTINS I would love if you guys sold pre cut kits for specific makes/models. Not sure how many takers you would have but I know if you or anyone sold kits I could install in a day or two (no measuring required, just drill and rivet) it would definitely sway the hull I'm willing to buy.

@BernPisarcikJr 6 ай бұрын

Matt, Does the TM foot tray help strengthen the area being the fact the inner support is cut? My 15 year old really wants one for our 1448 and our Tour Pro pedal. Only thing stopping me is I’ve seen that brace while looking from the hatch access. Thank you.

@TRICKEDTINS 6 ай бұрын

It will be fine. Worst case you add a small tube or angle as a kick stand if you think you need it

@CRAPPIEfishin 6 ай бұрын

Awesome work brother! I wished my Grizzly 1448 looked like that, minus the console 😂. What would a build like that run?

@TRICKEDTINS 6 ай бұрын

Thanks brotha! 5k if i do it?

@dustinbednorz2178 6 ай бұрын

Great looking build as always. That’s a pretty cool layout. I’m curious about the switch placement. Why there vs mounting them on the console?

@TRICKEDTINS 6 ай бұрын

Thank you. The reason for the switch panel in the front is because we need the removable pan for access to the livewell pumps. He has another panel that will go at the consol.

@chasononeal17 3 ай бұрын

Hey I have a question. I got the same boat. It's still tiller steering. I'm wanting to add a console but slide all the way up to the front deck with a seat bench that comes off the back deck. Do u have any ideas on that and a live well the go from the side of the console all the cross the boat for big catfish any opinions are ideas be grateful thanks

@TRICKEDTINS 3 ай бұрын

Honestly I think it's to small for all that, but it's your rig.

@broclangren2519 6 ай бұрын

Sweet build. Never thought I would see a side console 14 foot Jon but it’s pretty slick.

@TRICKEDTINS 6 ай бұрын

It reminds me of bumper boats when I was a kid! Lol.

@MrTk6969 6 ай бұрын

@trickedtins do u know off hand the dimensions of the inside of the rear bench on a tracker 1648

@TRICKEDTINS 6 ай бұрын

By heart lol. 24"wide 12" deep

@stevemorris8545 6 ай бұрын

I agree, those seats look super goofy. If that was my boat I would have just asked for them to be flush mounted or just put some Hydroturf down on the bench and call it a day. I'd question if those are actually even safe with the motor he's looking to put on it. Other than that, killer build as always!

@TRICKEDTINS 6 ай бұрын

Hahaha. While I was reading your comment. I was picturing him hitting a big wake and the whole ass seat just flying out with him in it.

@zumje 6 ай бұрын

Theres a pretty cool swing away side console a guy manufactures in Aussie land...Ganat is the name I think,few youtube videos.

@TRICKEDTINS 6 ай бұрын

I will check it out

@christinerogers5331 6 ай бұрын

Matt, I'm really surprised at how well this build is coming together, it's going to be an awesome 1448 tourney boat! Anxiously awaiting your next video! Take care and be safe!

@TRICKEDTINS 6 ай бұрын

Thanks Appreciate the comment!

@williamarnold1963 6 ай бұрын

How much something like this cost

@TRICKEDTINS 6 ай бұрын

Depends on if you're going to do it yourself and just buy my materials or if i do it. My labor is expensive.hit me up on IG if you want more info

@brandywineangler6748 6 ай бұрын

Honestly I like the side consul layout. The hatches really maximize the space in there. A great 14 foot rig.

@TRICKEDTINS 6 ай бұрын

Thanks, brotha.

@fernandomatos4098 3 ай бұрын

Quien lo vende y cuanto vale el bote de 14 ft

@TRICKEDTINS 3 ай бұрын

English?

@stompylee 6 ай бұрын

Couldn’t you do a seat base with fold forward storage box? It would give you the seat at the right height and give him the storage he needs. Just a thought kinda kills back boater area.

@TRICKEDTINS 6 ай бұрын

That's a good idea thought about making those seats permanent. Just bolting them directly to the hatches. We'll see what he says. Thanks for watching appreciate the comment.

@clintallard912 6 ай бұрын

Gotta be for the Jon boat elite trail

@TRICKEDTINS 6 ай бұрын

Lol, idk if he is gonna fish a trail, but it's gonna be a bad ass rig.

@randallmiller572 6 ай бұрын

Awesome work dude!! Definitely a bad ass little side console!!👊🏼

@TRICKEDTINS 6 ай бұрын

Thanks brotha!

@mich5167 6 ай бұрын

What cutting wheel do you use on the grinder?

@TRICKEDTINS 6 ай бұрын

Thats a great question. Been on the fence lately. Ive been using radiac wheels forever but lately the quality has really fell off and makes me nervous. I also use klingspore wheels they are really nice but $$$$$pricey $$$$$. Im in the mix of deciding on my favorite cutting wheel atm.

@mich5167 6 ай бұрын

Thank you for the quick response, ive been redoing a boat and have been having a terrible time cutting the aluminum. I’ll give the klingspore a try today