Installation of Jeep Trackhawk Brembo calipers and rotors on a 2015 Dodge Durango RT.
Пікірлер: 63
@isaacbyrd85045 ай бұрын
Great video I’m tuning in 🔥
@tonyharmsen50815 ай бұрын
Thanks bro
@412AutoCare6 ай бұрын
Did this 2 years back. What I learned is if you have the money for the 2 piece rotors go with the trackhawk brembos if not go with the SRT brembos and the 380mm front rotor and 350mm rear rotor. Trackhawks front rotors at 400mm.
@tonyharmsen50816 ай бұрын
Thanks
@The45WhispersКүн бұрын
Will the trackhawk brembo fit correct on the srt rotor tho? Asking bc I have 380mm rotors now and read your comment but I need to replace my driver front brembo
@412AutoCareКүн бұрын
@@The45WhispersI want to say yes. Are you changing both front calipers though? The difference between the calipers is the mounting holes are a little further down on the trackhawk to allow space for the 400mm 2 piece rotor. Both are 6 piston.
@The45WhispersКүн бұрын
@412AutoCare man I finally saw a picture of them next to eachother on ebay...way different..yea I'll buy another srt caliper then...this guy damaged mines trying to bleed them on my jeep 5.7
@lolaharmsen9904 Жыл бұрын
Awesome work
@tonyharmsen5081 Жыл бұрын
Thanks bro!
@BrandonGoof6 ай бұрын
I’m about to do this swap on my ‘19 DDRT. Thank you for this!
@tonyharmsen50815 ай бұрын
You’re welcome. Good luck!
@BrandonGoof5 ай бұрын
@@tonyharmsen5081 did you have any issues threading the hard lines back into the new flex line? Mine aren’t starting.
@wensyhernandez221510 ай бұрын
Hi, Thx for the awesome video Tony. The info you provided helps alot. Just got some 2016 Trackhawk Brembos for my 2018 Durango RT. Do you recommend changing the stock brake lines for this big brake conversion or is running the stock lines ok? If you do recommend changing the brake lines do you have any recommendation for any stainless steel lines?
@tonyharmsen508110 ай бұрын
The factory line will work, but if you want stainless, check with R1 Concepts. Thanks for the positive comments and for watching.
@The45WhispersКүн бұрын
Question I just put srt jeep brembos on my 5.7 Jeep GC..if my driver brembo got damaged, can I use the trackhawk driver brembo to replace it? I see people saying rotor size are different?
@ZRSlava2 ай бұрын
Hi! Great job done!👍 Do you think the Trackhawk brakes will go with my original R20 discs on Durango R/T
@tonyharmsen50812 ай бұрын
No, you will need new rotors.
@roydollabill8 ай бұрын
Did you have any issues with the emergency brake settings when you swapped the calipers and rotors?
@tonyharmsen50818 ай бұрын
Not at all. It’s the same on RT and SRT.
@TheCondoInRedondo5 ай бұрын
I see Bilsteins. Thought those were only found on SRT, Hellcat and R/T with Tow-n-Go. How did they end up on the Durango you're retrofitting with the Brembos?
@tonyharmsen50814 ай бұрын
You can buy them to go on just about anything. I have them on my Durango as well.
@adriantoia6 ай бұрын
Did you need to swap the brake booster or the master as well ?
@tonyharmsen50816 ай бұрын
No
@EscobarMT Жыл бұрын
So in order to brembo your rt durango you must have srt wheels or at least spacers right?
@tonyharmsen5081 Жыл бұрын
That’s right
@raulcastro57153 ай бұрын
I found some Brembo Breaks from a Jeep Cherokee 12-16 will They fit my 2019 Durango RT?
@tonyharmsen50812 ай бұрын
I think so. I don’t believe anything has changed from 14 to 19.
@mpresto158 ай бұрын
Whats the specs of your rims? I ordered similar from ebay but dont know if they will clear brembo conversion i plan to do down the line.
@tonyharmsen50818 ай бұрын
I have 22x9 inch with a plus 30 offset Hellcat replica on my Durango. The one in this video is 22x10 with plus 30 offset Trackhawk reps.
@mpresto158 ай бұрын
@tonyharmsen5081 appreciate the answer i think mine are 22x10 +35 from the description we will see if it pans out. Why the switch to hellcat reps
@Johnny-og6lu11 ай бұрын
Looks good!! I know that the Durango SRT front rotors are 380mm and the Durango Hellcat front rotors are 400mm (rears are 350mm on both the SRT and Hellcat). I was told that the Hellcat calipers are slightly longer/larger than the SRT calipers. So I’m assuming the Trackhawk calipers are slightly longer/larger than the SRT calipers too. Did you use the 400mm one piece rotors on your Trackhawk conversion?
@tonyharmsen508110 ай бұрын
No. I’m not aware of any difference. News to me.
@The45WhispersКүн бұрын
Did u try it?
@bfreeman1685 ай бұрын
Can I use the existing brake lines with the brembo calipers?
@tonyharmsen50815 ай бұрын
Yes
@luisceja2270 Жыл бұрын
Hey sir , i need help with this conversion myself. I have a 2020 Dodge Durango RT and am looking into the Trackhawk caliper conversion myself . I already have the Trackhawk wheels and tires on now so clearance isn’t an issue. What rotors / size did you use for front and back ?
@tonyharmsen5081 Жыл бұрын
You have to use the ones for the Trackhawk, JGC SRT, or Durango SRT.
@412AutoCare6 ай бұрын
You need 2 piece 400mm rotors for the front and 350mm rotors for the rear IF you go with the trackhawk brembos. If you go with the SRT BREMBOS you’ll need 380mm fronts and 350mm rears. I’m not sure if he knows that
@The45WhispersКүн бұрын
@412AutoCare why? What if I already have the 380mm srt rotors? Trackhawk brembos won't work correctly?
@3silver4beast596 ай бұрын
Quick question will 2018 trackhawk brembos fit my 22 durango?
@tonyharmsen50816 ай бұрын
Yes
@neonpeonu Жыл бұрын
Great video! When he did the eibach lowering springs did he need to buy anything extra to get the alignment correct? I hear mixed answers...Some say you have to buy the alignment kit from Bwoody and others say the didn't need anything to get the alignment correct.
@tonyharmsen5081 Жыл бұрын
I put the adjustable upper control arms on the back for the camber adjustment. You can see them when I’m working on the rear. Those are made by Camber King and sold on eBay. They also make a upper arm for the front, but neither one of us have them yet.
@neonpeonu Жыл бұрын
@@tonyharmsen5081 looks like they only make them for 11-17…mines an 18 RT.
@seanmichaels411 Жыл бұрын
Do you have to replace the rotors or can I use my stock rotors?
@tonyharmsen5081 Жыл бұрын
You will have to get the same ones as the SRT. These are much larger rotors.
@seanmichaels411 Жыл бұрын
@@tonyharmsen5081 Do you know the size? Online I found 3 different sizes for the SRT vehicles. I am not sure at this point lol
@westlafrenchies_Ай бұрын
I have a 2018 durango rt i bought some 2023 brembo i need to change spindle
@tonyharmsen508129 күн бұрын
Is this a question?
@westlafrenchies_29 күн бұрын
@@tonyharmsen5081 yes what year is your truck? And what year brembo
@MrHencH23 Жыл бұрын
hello ..is this compatible with my durango rt 2021?
@tonyharmsen5081 Жыл бұрын
Yes
@MrHencH23 Жыл бұрын
thank you bro
@3silver4beast59 Жыл бұрын
So you dont need knuckles and spindles to install them on a RT durango? Just the bare caliper can bolt onto durangot RT?
@claytondeperna337511 ай бұрын
I'm curious also, do I need other parts besides the srt calipers rotors and rims?
@kevinjimenez496410 ай бұрын
@@claytondeperna3375we need answers fr
@srtjesseb283711 ай бұрын
Looks like the wrong front rotors
@tonyharmsen508111 ай бұрын
Why do you say that?
@aceklub2k510 ай бұрын
@@tonyharmsen5081380 is srt size rotors and trackhawk rotors are slightly larger
@kevinjimenez496410 ай бұрын
@@aceklub2k5like how more? whats the mm? size
@aceklub2k510 ай бұрын
@@kevinjimenez4964 400mmx36mm 15.75” x 1.42”
@Johnny-og6lu10 ай бұрын
The SRT, Durango SRT Hellcat and the Jeep Trackhawk rear rotors all use the same size 350mm rotors. The SRT front rotors are 380mm (15”). The Durango SRT Hellcat and Jeep Trackhawk front rotors are both 400mm (15.7”). The 400mm front rotors are also slightly thicker. The front rotors in this video look like 380mm. The 400mm rotor would fill that front caliper to the edge of the rotor like the rear caliper does in this video on the 350mm rear rotors.