Tractor Implement Storage - Easy And Affordable Homemade Compact Tractor Attachment Storage Rack

[@kayvonmansouri]

prediction, those forks go through the back of the garage :) nice build

[@freddiedrawhorn1939]

Nail some cheap nail aprons to the face of wood for bottles of additives ,clamps ,buckets,small hand tools great idea

[@chuckman2219]

Another great video on something I'll need to do in the near future. I'll probably add some protection to the back wall or I would be pushing my forks or the grapple tines through the sheet metal when trying to reattach them.

[@RockhillfarmYT]

Yeah, I need to do that

[@CriticalReactor]

I second that. Pallet forks will go through sheet metal like it wasn't even there. Any old 1x6, fence picket or similar as a kick panel to the back of the shelf would give adequate warning. One wrong move at the end of a rough day would make it even rougher.

[@RockhillfarmYT]

Thanks for sharing. I’ve been lucky so far. It’s been a year and a half and I haven’t damaged the back wall It has been my intention to put up a backing but I haven’t got around to it

[@paulfromcda8440]

Your forks hit the back wall in your video. Maybe you didn't notice... must be a noticeable dent outside...

[@robertward553]

Boy, that's a lot of green. Looks good.

[@RockhillfarmYT]

Thank you sir

[@pramagli]

Great video. Thanks. I followed your plan and last weekend my son and I built something similar. They shelves worked out great and all my implements are in their own place now, instead of scattered all over the place. Thanks again.

[@JohnnyBubbz]

Awsome job! You had a storage problem now you don't.

[@je1279]

Very helpful. I need to build an outdoor lean to version of this for my attachments.

[@kevinashby3784]

That gives me an idea for my barn. Thanks

[@monstersofthemidway7125]

Great video and nice build. Friendly suggestion, next video turn the music's volume down. Less is more.

[@RockhillfarmYT]

Yeah, I’ve made about 400 videos since this one and I have learned a lot. Thanks for watching

[@elektrikman8834]

as always I enjoy your videos I don't have as much space as you do or as much equipment but with a few changes I think I can adapt my shed to build a similar shelf arrangement thanks

[@dancrimmins107]

Nice work! I was thinking of building a lean-to with this sort of stacked storage, so this helps a lot. I think I would add some sort of center post, since that seems like a lot of weight stretched across what looks to be 16 feet. Well done video! Moved along quickly, while still explaining each step and easy to see what was happening.

[@BrotherApps]

I like it. I have a similar size tractor with 3 front and 3 rear attachments. My shed is smaller, so shelves are needed. I was going to build only 1 shelf, but 3 looks better. Thanks!

[@RockhillfarmYT]

This Has been a huge improvement to quickly switch attachments and keep my equipment organized and out of the weather Since these trackers Don’t lift that high you have to build the shelves just the right size for your implements to be able to reach a third row, but it does work

[@craigguinn5423]

I just made a vertical MMM stand with rollers. Posted in Kubota. I need to consider something like this, scaled down to maybe four bays.

[@HardyBrothersOutdoors]

Great project Brock. Need to build one of these two. Nothing more frustrating than jockeying attachments all around to get to the one you want. - Josh

[@RockhillfarmYT]

Thanks It actually has been a game changer for my organization

[@n206ja]

This is exactly what I've been planning to do for quite a while! Maybe I'll get on with it now that you have inspired me! BTW, it bothered me a bit that the 2nd shelf rocked a bit when you loaded it - perhaps you ought to put some angled braces running up from the posts to the front of the 2nd shelf?

[@justinhc123]

Good deal. Nice and simple. Thanks!

[@busterkellar3992]

Thanks for the video. I've been trying to come with an idea and this really helped😊

[@northeasterndirtandpropert7974]

Indoor storage is the way to go.Much more organized also.Working on it this year here.Nice job.

[@RockhillfarmYT]

Thanks. I’m struggling to decide how to organize the Quonset Hut.

[@troyelliott9465]

Great Job..... Kubota Rules.. Have a great holiday. I think you tractor implements are sick.... they're all green.

[@RockhillfarmYT]

Nothing runs like a Deere

[@ralphfarmer7621]

Made in America. Nothing like Anti American Japan Kabota

[@RockhillfarmYT]

I try to buy American anytime I can although sometimes that’s not even an option. I think all of the tractor manufactures do get some of the components from overseas. I know that my tractor specifically was assembled in America

[@silverbackag9790]

@@ralphfarmer7621 haha. John Yanmar Deere is the full name.

[@watkinstreefarm6880]

Pretty cool man. Always feels good to be organized. 👍

[@RockhillfarmYT]

Thanks

[@PurpleCollarLife]

Hey Rockhill - your best video yet! I didn't realize you had so many attachments. Great John Deere customer! I love that you're getting them all in out of the weather, and the shelving system you made is outstanding. You're right, what you need is always at the back when everything is on one level. This is perfect. Great job! What is the music you used? I love it.

[@RockhillfarmYT]

Thanks for all the kind words. I’m really happy with this rack and I’m already planning a second one for the three point attachments I get all of my music from epidemic sound but I can’t remember the name of the tracks off the top of my head

[@freddiedrawhorn1939]

Great idea man great video go up instead of out

[@RockhillfarmYT]

I’ve been using this for almost a year now. Works great and I have expanded it more Thanks for watching

[@MyClutteredGarage]

Great job. That’s going make your attachments last so much longer! Thanks for sharing. -Ed

[@RockhillfarmYT]

Thanks It has been really convenient

[@tactical1224]

Nice job, but definitely need to add some bumpers to back for each shelf to avoid damage from loading and off loading the attachment. No matter how careful you try to be, one day something will happen and you don't won't to cause damage to the metal siding of your building.

[@RockhillfarmYT]

Thanks for watching

[@markkrauss5994]

Very nice setup

[@RockhillfarmYT]

Thanks

[@NaughtyGoatFarm]

I'm thinking of using pellet racking as implement storage.

[@RockhillfarmYT]

Follow up video expanding this set up kzbin.info/www/bejne/sKPdhnqCe7N_j7s Thanks for watching and check out our other John Deere 2038R compact tractor videos at kzbin.info/www/bejne/fWrGlHaofremnbs And subscribe to our channel at kzbin.info

[@johnlucs1121]

I would build a stop wall on the rear where your forks are going. One day you will kick yourself for accidentally punching through your back wall. You could screw down a wooden pallet to be your stop and also help with the forks not tipping back towards you.

[@RockhillfarmYT]

Yeah, I’ve been thinking the same thing. It’s just a matter of time before that happens

[@jackrothaus2816]

That's a dam good idea.

[@davidwho8215]

@@RockhillfarmYT- I was thinking the same thing.

[@RockhillfarmYT]

Almost 3 years later and I’ve never hit the back wall

[@jeffmayeux1692]

Great video and smart thinking to protect your investments. How many farm yards across our country have rusting equipment spread in various parts of their property.

[@RockhillfarmYT]

Thanks. At this point I’ve extended the shelving all the way down the building and I’m putting up a Quansett hut next to it

[@jeffmayeux1692]

@@RockhillfarmYT I'm planning to follow you as you build it.

[@RockhillfarmYT]

Thanks

[@michaellavalle11]

Plywood on the back wall would help to protect the building from an accident.

[@wildbill23c]

I just bought a scaffold from Harbor Freight a couple weeks ago and built a lower shelf on it to store implements. So it can easily accommodate 2 implements per scaffold. Going to buy a 2nd scaffold and do the same thing which will give me space for 4 implements, and since the scaffolds are on wheels I can roll them around out of the way and roll them out for easier access to swap out implements...rather than trying to build a solid system like you did, I decided to go with the scaffold idea due to space issues and not 100% sure yet where their permanent place will be in the shop....I think once that happens though I'll build a similar shelving system like you did where I can just drive up pickup the implement I need with the pallet forks, get it on the ground and hook up and go.

[@RockhillfarmYT]

I have the same scaffolds that I use in my main shop. Great value but I just don’t use them for attachments because my equipment shed is on a hill Since this video was made I’ve done a lot of additions to this equipment shed. I’ve built custom pallets for all my three-point attachments and those set on shelving as well I even have a custom Backhoe hauler

[@magzfarms357]

@@RockhillfarmYT you should do an update video showing the improvements and giving an update on how you like the system. Awesome idea, I’m stealing another from you, nice work!

[@RockhillfarmYT]

I will be doing an update as soon as the Quonset hut is done and I get all my equipment organized Thanks for watching

[@whitepinewoods9029]

I mean, that’s just awesome! Great idea! Great editing!

[@RockhillfarmYT]

Thank you. I appreciate it

[@jamescochran8509]

Good job ,I need to make one.

[@RockhillfarmYT]

I’ve added to it several times since then and made custom pallets for my three point attachments to be stored on shelving too Thanks for watching

[@jhobbs8024]

Awesome idea!! Appreciate the video!!

[@RockhillfarmYT]

Thanks This has been a huge space saver

[@kentmccormick4230]

Great idea, I need to do something like this

[@RockhillfarmYT]

Thanks I have expanded it once since this video and I’m getting ready to finish it all the way across the back wall for my 3-Point attachments

[@customcraftsbybruceslaton4872]

I am planning to do this same idea.

[@edbarkley1904]

Need to add a 2x10 Buck-behind your forks so you don’t punch a hole in your Siding

[@RockhillfarmYT]

Thanks for sharing

[@stevedeweysmith]

Nice job!

[@RockhillfarmYT]

Thanks

[@dougwilson1760]

What is the diameter of the Lag screws. You said they are 3 1/2” long, but didn’t give the diameter. Are they 5/16” or 3/8”?

[@hayesoutdoorsandtractors3278]

Great job

[@RockhillfarmYT]

Thanks The shelving system has been a huge benefit to my implement organization

[@hayesoutdoorsandtractors3278]

If you seen on my video I’m building a 16x24 tractor shed in the spring. Have been looking for some ideas to get my implements all in there tu for the ideas

[@RockhillfarmYT]

I’ll have to check your channel. Thanks for watching

[@hayesoutdoorsandtractors3278]

I would appreciate that I’m small just starting but my family love doing the same thing yours does. Have a great day .

[@RockhillfarmYT]

I’ll definitely check it out. I really just started about three months ago and I feel like I’m getting the hang of it now

[@DarrenCharron]

Man that is awesome! I am going to do the same with mine. New Sub! Thumbs up and thanks fr the awesome video!

[@RockhillfarmYT]

Thanks. I have added to it a few times since then and now have the ability to put my three point Attachments on a shelf

[@DarrenCharron]

@@RockhillfarmYT I know I am watching your video of the shelving with the diesel and gas under the shelving. Looking forward to your other videos. I just bought a brand new New Holland Workmaster 25 compact and have a box scraper, forks a blade and a front snowblower coming in this week hopefully. I have a video to post tonight of the tractor and loader.

[@RockhillfarmYT]

Congrats on the new tractor

[@janetrandle6882]

Why don’t you build some covers out in the field for those heavy and large attachments?

[@RockhillfarmYT]

Do you mean build something like I already have right here? I already have a building for storing these… About a year after this video was published. I did build another equipment building.

[@sweetlou7375]

Can you tell me the height of the back wall in your shed? I'm looking to building a shed for my 2032r and it would have the same reach as the 2038r

[@RockhillfarmYT]

The top shelf is 72 or 73 inches high So that you can still reach it but you have plenty of room underneath for two layers of implements I don’t know how high it is at the back wall but 3 feet away from the wall it is 10 feet high. I used four by fours 10 foot long and they were touching the tin roof I take my implements on and off of this shelf system every day and it has been a game changer for my organization and keeping everything dry

[@sweetlou7375]

@@RockhillfarmYT thanks for the info

[@particularlybad]

Childcare by Samsung, lol.

[@linndietz3943]

Maybe I missed it, or maybe I just fast forwarded too much. You used 4x4's for the supports. Were they 2x6 or 2x8 on the shelve supports and how far was the spacing (16 inch OC)? I'm looking at building something similar that needs to be 3 implements high that includes 2 snowblowers and a belly mower. So guessing the implements weigh around 400 lbs apiece (on the high side to be safe).

[@RockhillfarmYT]

They are 2 x 6 on 16 center It’s been up for over a year and I put a ton of weight on the shelving Worked out well

[@MrLGRafinan]

Brother.. what are the dimensions of that rack?

[@paulfromcda8440]

So your forks don't hit your metal siding, a plywood back board would have been good!!

[@RockhillfarmYT]

Been 2 1/2 years and haven’t hit them yet. Maybe one of these days