Traditional Door Casing Masterclass - Full Pro Carpentry Tutorial

[@justbartee]

I love that you got emotional about your own work. ANY customer should be proud to have you working for them. WELL DONE !!

[@danielsegreti4475]

Shout out to the filmer, getting those tight shots and then getting you back in frame without causing motion sickness.

[@ohdang8515]

Dude you should be so proud of that. That is no joke one of the most beautiful things I have ever seen. It's clean and crisp and classic. Absolutely stunning.

[@pitsnipe5559]

Trim makes a house. You are so right. Because of the custom trim work that I did in a previous house, my realtor upped the listing price 20K. I git too. Just as important is quality hardware.

[@andyignacio6785]

Been watching forever. It's nice that you still point out the fundamentals like easying into the cut line.

[@Joseph-jx8bl]

That looks amazing! It’s impressive to see how much you’ve grown and expanded over the last 2 years + since I’ve started following you. Great job and thank you for the lessons my friend. I also just realized that the casing around the window in your shop behind the chop saw is Makita Blue…NIIIIICE!

[@DiannaAtherton]

I have been following you since your very beginning on KZbin. I have learned so much valuable information. It helped me to take that first step in my home renovation these last 6 years, more than you know. Everytime I feel rushed I remember your body language and mannerisms to just slow down and do good work. This video is going to be my favorite video. Go slow, be sure and take a step back and look at my work. I appreciate that. Truly Dianna A.

[@hangtownbikerhiker6526]

@Finish Carpentry TV It’s absolutely amazing! I actually learned a lot on how to mill from this video! Thank you so much for taking the time to do this for us!

[@karlriley1314]

AWESOME and OUTSTANDING case work. Can't expect anything else from on EXPERT like you. You are THE MAN of Door Casing Masterclasses.

[@subtle7hunder62]

Bro, I love the satisfaction and enthusiasm you have for your work. Excellent!

[@georgiafan6618]

Good idea installing back band first. You have to consider and uneven wall and no room for nails. Super gorgeous install. Stand back and soak it in! 👍

[@rogerkaldahl9540]

Richard, I'm proud of you and your work. Almost everything I know about trim carpentry I have learned from you, don't worry, I'm an old fart and am not in competition with you. Love how you are progressing. Some day I'll make my own doors and make them look stunning.

[@timf5963]

"And we're finally going to trim out the door that we built over a year ago." These are actually soothing words, good sir. Makes me feel better about the 10 projects I have going on.

[@tjo1984]

Nice work. Great to see your high level of pride. Good stuff, thanks.

[@mdvener]

As a retired electrician, I really learn alot from you. Thanks, and your door casing looks GREAT.

[@G0108-p2p]

Absolutely crazy ... richard tried to scam his subscribers using telegram , your partner asks for $3,500 for crypto accounts,. I sent the accounts to KZbin, and klever with all the details and link to the accounts and transaction list. I mean what is the deal trying to scam your own subscribers?

[@mdvener]

@@G0108-p2p their has been a scam on all you tube accounts offering you everything but is nothing.

[@mdvener]

@@G0108-p2p scamers have been on everyone's response page. A lot of creators coming out n telling us DON'T FALL FOR THE PRIZE GIVE AWAY. It's not them.

[@pappyoh1]

Absolutely beautiful, it’s so nice to see somebody so passionate about their craft! It’s definitely lost in a throw away world of cheap and fast

[@bobafett5926]

@18:20 That feeling when you works honestly pays dividends. Amazing work, excellent video. Appreciate the time you put into your work and these videos.

[@maxpowers646]

Great video love seeing traditional trim work, out of the countless houses I’ve built and remodeled we’ve only done Home Depot style trim in million dollar houses

[@majordanggle]

Man this is great! You inspired me to do my own carpentry even though I have no experience. I built a domino table and came out great just by following your attention to detail as well as tips and tricks.

[@matthewcacioppo9223]

Awesome video. Beaded casing is beautiful. Maybe you can show how to use the jack miter it as well. Very cool method

[@BrianFerraira]

just started my carpentry business about year and a half ago and your videos are very helpful I watch your videos see how you do it and then go out and charge a bunch of money cant thank you enough.

[@stuartjohnson8171]

Great job. A small hint about using the pinch clamps. Wrap a rubber band around the tips. The handle will be held apart and gentle squeeze will spread the tips making clamping and removing the springs a snap.

[@hunter-yy3ob]

Hi Richard, really appreciate the work you put into these video’s awesome craftsmanship been a viewer from the beginning great to see how far you have come 👍👍

[@annealston4858]

this just shows you have mastered your craft

[@ZachAshcraft]

Totally relate to the enjoyment you have at the end of this one. I’ve had a blast trimming out our downstairs with craftsman casings after putting in new floors

[@SuperWingman69]

Richard! After you had it completely installed and took in that pure / honest moment of job satisfaction, I could literally feel your joy, like it was my own. In a word your work is “Outstanding”. I have a question… what does one do when they have a door that’s jammed into the corner of the room and won’t allow them to make the left and right side vertical legs equal in width?

[@notbad442]

Stunning! I share your passion, it’s perfect, love it can’t stop looking at it.

[@JonnyTsunami1]

Gotta love the Richard whistle of approval! Really nice work!

[@survivaloptions4999]

"This guy really loved his garage." - An archeologist in 2123

[@bluegrassdna5572]

😂

[@m1quatro]

Hahaha

[@TheCrusades1099]

" This was a tomb a very important man, maybe a king?" - A different intelligence 21230

[@wilahinely]

Damn dude you put out such quality content. Really appreciate your videos.

[@Jamie-mt2vb]

Fantastic video, impressive skill and craftsmanship. Thank you.

[@antoniovelazquez3895]

No cabe duda que usted Ama su trabajo ... FELICIDADES !!! Nice Job !

[@gcranch9913]

That’s the problem with videos like this…true craftsmen make this look toooo easy! Most excellent

[@keokeoihaia306]

Awesome work, you make it look so simple

[@nicholasmanovich4330]

I agree....the millwork/trim really makes or breaks the aesthetics of a room/home....I recently redid the baby's room and every now n then I'll go in there and pull the curtains back and just kinda take another look....it was my first time doing something like that so I didn't exactly break the bank on quality/high end trim but it's still makes a huge difference compared to the other bedrooms. Great video as always! Enjoy your content !! Thanks !!!!!

[@jonboy8181]

I love how much you love this.

[@jeradmiller4575]

When I did my two piece door casings I glued and tacked the back-band on first. That way I only have to cut the miters once since I'm cutting the casing and back-band as one piece. Speeds up the install.

[@detectingohio5614]

I agree 1000% with that choice of door and trim u nailed it 👍🏻pun intended

[@jelsner5077]

You SHOULD be happy with how it turned out. It's beautiful.

[@kevinf3641]

Looks good and clean.

[@andredsouza2320]

Excellent video as usual, Rich. I'd suggest holding the foam can upside down when foaming.

[@99293259]

Amazing job man!😎 Love your passion and dedication to woodworking❤

[@blradcl]

Yet another great video

[@michaelparker1813]

It looks great. Wonderful workmanship.

[@MsBillboy]

Hello Richard and all your subscribers I thought you all might want to look at Robin Clevett making some external doors for his house (U.K.) title of his video is...Making a pair of front doors, my super expensive front doors are finally being made Part 1. all the best Peter..

[@jar944]

Jack miters on the base layer of casing would be preferred, especially if you are going to that level of detail.

[@andrewbrown8148]

Great work, Richard~! You always make everything look so easy. Looking forward to my chance at this some time.

[@maxexposure6253]

Fantastic!!! I can feel the love. Thanks for the video.

[@Thanos0001]

You sir, are a master at your craft. I could get better results if I just slow down a bit. Seeing you work on real time I can definitely see the payoff.

[@larryshipman248]

truly amazing.

[@mauriceryton]

Great job.

[@scioli700]

19:34 "I'm Richard McMurray, we'll see you next time on This Old House." 👋

[@mikebowling8795]

Loved watching this video, can't wait to use these tips.

[@HeyMichaelLeo]

Beautiful

[@jaimebotello3512]

Looks great

[@rickcimino743]

due to the date this came out I was kind of expecting something a bit different. Your reaction at the end ......was priceless but humbly I would suggest that the cosetted corners you did elsewhere are nicer.

[@mattheworoark1459]

There is nothing quite like looking at a crispy miter.

[@laszlodesimon4768]

Beautiful work, as usual! My only question is, why didn't you refinish the wall prior to setting the casing in?

[@kylewightman5176]

Awesome job, speaks for itself! I have liked watching you over the years,perfect your craft and change the way you do things. I also found my Dewaukee hat yesterday and was ecstatic. Anyways love watching you everyday. One question though, about your Milwaukee brad nailer because I’ve seen you using it for a while now. Has there been any problems you’ve come across with it? How long have you had it? And do you think it’s worth it? Thanks!!!

[@googlesucks6741]

Best looking door, w/trim: in a garage!!! 😂😂

[@michaelschmitz8028]

Looks awesome! What is your method for dealing with the small amount of exposed drywall paper from removing the old trim? The stuff that the back band just barely didn't cover. Will caulk and paint hide it, or is there another step?

[@edriquez57]

You should be proud !

[@BigJohnson1566]

Damn fine job 👍🇺🇸

[@joev597]

Looks great, you make it look easy!

[@michaelplays2449]

Nice Job Richard !!!!!!! 😊😊😊😊😊😇

[@T.E.P..]

This is the way

[@rast6468]

Beautiful work. Why wouldn't you attach your back band to the casing pieces first, then make your miters?

[@TheRemodelingStation]

When you step back and admire your art>

[@JPGuay]

Lovely indeed !

[@robertmawby3021]

Does having such a large plinth block so close to the hinge side of the door not impede the opening of the door? Surely it will restrict the angle of the open door to the wall behind it? Your work and videos are both excellent Richard. 🇬🇧🇬🇧

[@1rallod]

Art!

[@TanukiDigital]

I feel like an expert now and I'm just sitting here in my chair not doing anything.

[@ernestvalenzuela3561]

Great work !

[@billsmith8339]

Awesome!

[@noahb.7838]

That was awesome thank you for sharing

[@Andrea-bw8xm]

Beautiful!

[@jaimemontiel2916]

I'm starting to use biscuit joints on my casing 45s

[@bntheyoutube]

The John Deere sticker still throws me off hahahahaha.

[@bntheyoutube]

What do you mean?

[@bntheyoutube]

@FinishCarpentryTV.. exciting!! How do I get it?

[@jbratt]

On your back band wouldn’t it be easier to cut the 45 first and cut the 90 off at the bottom second?

[@KimiWallrus]

She got them heavies.

[@rickbrenneman3913]

Hey Richard... do you know you can put the cap of your glu-bot on top of the lid? That lid always keeps getting in the way for me...😅

[@mib20000]

Looks amazing . If I did that I can guarantee 50% of the nails would have blown out the side of the other moldings

[@joshuahellriegel3354]

I might move to DFW to have access to Winsor millwork.

[@Grantrude]

what if the drywall sticks out proud of the jam? Also, I love your passion and your willingness to stretch yourself and learn more. Also, did you ever figure out how those metal rings were installed on the back of the miters in the old house you restored?

[@Grantrude]

@@henrypeisch5289 cool, I understand, thank you

[@loganpatterson4674]

If it’s not much, smash it with a hammer or roll the miter. Only extend the jamb if it’s significant, like more than 3/16 proud

[@mplussant]

…take a picture of the door…in case you lose it to a tornado…kudos for the musical epilogue (wife’s idea??)…

[@invokethefifth8136]

What size floor trim would you use for a door casing of that size?

[@charlesviner1565]

Love it 👍🔨📐

[@amc1325]

What’s the primer you sprayed on? Thanks for all of the great information in each video!

[@jakerossgil3048]

What primer did you use for the bare wood?

[@TREKMIN]

Great video. I do have a question. Since you we’re limited to a 3 1/2 width on the trim, would you typically use that same width around the other doors and windows in the room or is it ok to use the full width on the doors that do not have an opposite wall (if that makes sense)? Should they all be the same width? Thanks again.

[@carl3500]

Just a curious question why not nail the 2 places of molding together prior to cutting the miters. Less measurements and less cuts same results.

[@brewted]

Bro can you even do stain grade? ha!

[@christophsan4040]

Could you have pocket holed the back band to the casing?

[@davemotti4283]

What brand is the sander?

[@rohitkrishnan4482]

What spec screws do you use for the corners? Is it just 1-1/4" trim screws or something thicker?

[@renatozamora7594]

Who do you recommend for some trim work in the Los Angeles CA area. Thanks

[@philwort1873]

Do you nail the casing to the jamb or only the stud surronds?

[@brianmccarthy6059]

Could have sworn you left that door raw wood. Didn’t you finish it with Odies Oil? Or am I trippin?

[@matthewbauer89]

Will your door trim and window time be the same?

[@cndream1]

Why not use the iso glue this time ??