Train horn installed on 2014 Freightliner Columbia glider

@raneysonline @UPAuto
Cut the original air tube at the OEM horn, then 1/4” to 1/2” connector and 1/2” air tube to the horns. Removed the electric solenoid and install a threaded 90* w/push fitting to the horn.
Truck was running with 8” straight exhaust so not the best audio of the horn 🥴

[@caesarriley728]

What kind of train horns are they and what's your whole setup?

[@JMFuLLeR-WET]

I didn’t use the solenoid. I went straight off the pull handle. www.raneystruckparts.com/hornblasters-bandit-train-horn/