Transferlab Film telecine/Film Digitiser/ Film Scanner

Easy to use:
Install your camcorder or compact Pro camera and capture the movies in the best possible conditions.
Once captured, you will be able to work your films like any other video shot with your camera.
The file is flicker-free and in a known format, no complications with exotic codecs hard to master.
Fidelity of the original:
Equipped with a 5500K LED light source , the colour rendering faithful to the original.
Enlarged projection window for framing the entire film image is almost 25% more image .
The speed of the film is the same as in projection, no modification has to do post-capture even for the sound films shot in 18 fps.
The system is made in such a way that nothing brakes the definition of the image, the only limit being the resolution of the sensor of the camera used.
Rugged construction:
The assembly is very stable in order to minimize the vibrations often causing slight blurring of the images on other systems.
The projectors used (Bolex / Eumig chassis / Series 7 or 8 series) are known for their reliability and longevity , and we ensure the supply of spare parts to all our transfer benches.
Our Bench allows the scanning of all types of 8mm and Super8 sound and mute films (choice of format on the top right).
System Scalable:
Adapting to all types of hand-held camcorders , our transfer benches evolve with your equipment.
If, in the future, you change cameras, you will not need to change the machine, you just need to place your new camcorder in place of the old one.

[@riorich]

Looks like my old Eumig 810 D projector.

[@mackenzierough]

Yes it is!

[@alexetairieur7900]

First I thank you very much for your quick answer. But it means that during the time you are "transferring" , you always have a reverse image on the camera screen..... not very practical if we have to adjust contrast, colour, size...... Do you understand whan I mean ? hope to read you again

[@mackenzierough]

I just change the intensity of the LED lamp for exposure on the transfer then import to my computer from the SD card and make all other corrections within my editing software.

[@georgekyrala]

Why don’t you flip you had camera upside down,the the recording is right side up? Also what is the spec of the coupling lens? Thanks

[@mackenzierough]

Hi, too complcated to set up that way and the camera screen would be away from you not good for settings also you would still have to flip the horizontal, it is so much easier to flip the vertical and horizontal in the edit, the lens is a Astro-Kino IV 1:1,5 22m/m.

[@pedrosortv]

nesta sua ideia, desvira na vertical apenas, mas onde houver legendas aparecerão invertidas, é preciso desinversão também na horizontal, após.

[@eatspotnz]

Hey there, How did you add the brightness controller to the projector?

[@ACMacaya]

Hi, do you project direct in camera lens, what is that long cover that links lens projector and camera?

[@mackenzierough]

The Lens element is in there

[@RIGELpa]

Hola Alfonso conseguiste saber que lente utiliza entre el proyector y la cámara de video? estaría interesado en construirme uno como estos pero nunca explican que es lo que hay que hacer entre el proyector y la cámara. Saludos.

[@pedrosortv]

@@RIGELpa um tipo, como uma lente macro.

[@sjefwagemakers]

Hi, How did you fix the flickering of the frame transport? Regards, Sjef Wagemakers

[@mackenzierough]

By adjusting the speed between 16 and 24 frames a second on the speed slide switch.

[@mackenzierough]

See this one that I built:- kzbin.info/www/bejne/jaPWq4x8qMxqgLc

[@jalladarts]

hello, can you add link for the lens , from where can buy?

[@mackenzierough]

Sorry but the company in France does not sell the lens any more! I have converted a standard lens on another projector by un screwing the rear element removing it and just using the front element, good luck.

[@jalladarts]

@@mackenzierough thank you so much, any specs info about lens, i can buy from ebay

[@mackenzierough]

I did convert an Astro-kino IV 1:1.5 22mm lens from an 8m/m Siemens projector that worked fine.

[@alexetairieur7900]

For editing, how do you do to have the film ready to be shown....? (not upside down) thank you

[@mackenzierough]

You do that in your editing software, I use pinnacle Studio 20.

[@cemsengul16]

isn't telecine kind of stupid though? You record a playback of a recording and edit it.

[@mackenzierough]

Without it I would have next to nothing on my Channel!

[@antoniosgambelluri35]

​@@mackenzierough Hi I would like to buy this ..https: //en.film-digital.com/sets .. the 1014 and the 1016 there is only a difference the 1016 is equipped with mono and the 1014 and stereo changes the camera body a and Panasonic and the other and Canon in your opinion you could put the Canon instead of the Panasonic .. it inspires me more !! I like the kiit 1014 .. plus the Canon instead of the Panasonic.

[@mackenzierough]

@@antoniosgambelluri35 Yes on this video I'm using a Canon and it works fine.

[@pedrosortv]

@@antoniosgambelluri35 eles pedem uma fortuna pela lente telecine, tipo macro. Incessível a maioria de nos. Em torno de 800 Euros.

[@talldrummer1]

The idea is to save video that is not on any other media format. There is still A LOT of video out there to be discovered.