Transform Your Workshop with 3 in 1 Sawhorses - You Won't Believe What's Possible!

*Support What we do at KMTools.com
At Katz-Moses Tools we manufacture woodworkingtools, templates and jigs using a variety of materials. They all need to be broken down when they come off the truck for the various machines they are used on. Our current sawhorse setup was insufficient and frankly unsafe for my team. We designed one of the most versatile sawhorses we could think of. It has two types of rollers systems for easy unloading, infeed and outfeed support. Adjustable sawhorses from 30 inches to 50 ¼ inches for breaking down sheet goods into manageable parts. They use a unique hinge pin system that makes for easy adjustments and changing of the different top plates. There are plans available on our website. As always we keep this channel unsponsored and generate all our revenue at kmnttols.com. We have over 500 products that we use and love in our shops. If you haven’t been over to kmtools.com go check it out sometime. I guarantee you’ll love what we have over there.
Let me know what you’d like to see next! Please like, comment and subscribe.
----
Check out kmtools.com
Step By Step Build Plans shop.kmtools.com/3IDBCkt
Tools Used from KM Tools in this Video
Rubio Monocoat NOW in the KMTools Store shop.kmtools.com/rubio-monocoat
Katz-Moses Stop Block kmtools.com/collections/katz-...
Marking Gauge shop.kmtools.com/3YLSo6s
NEW LOCKED DADO approved in EU shop.kmtools.com/3S9csgB
K-M Tool Apron kmtools.com/collections/katz-...
KM Router Plane kmtools.com/collections/katz-...
Chamfer/Round Over Plane kmtools.com/collections/hongdui
Center Punch shop.kmtools.com/centerpunchred
Glue Scraper kmtools.com/collections/hongdui
CMT Forstner Bits kmtools.com/collections/cmt-r...
CMT Saw Blades kmtools.com/collections/cmt-s...
Digital Angle Gauge shop.kmtools.com/3lM8iiK
Digital Height Gauge shop.kmtools.com/3Z72P4p
3M Xtract Cubitron Sandpaper kmtools.com/collections/3m-sa...
KM Multi Sled FREE Plans shop.kmtools.com/41ank1E
Tamar 3x3 Custom Cutting Angles Wider than 45 on the Miter Saw Video • How to cut EVERY ANGLE...
----
*Check out OUR BRAND NEW STORE for tons of great TOOLS and Support the Katz-Moses Woodworkers with Disabilities Fund*: www.KMTools.com
Buy the Katz-Moses Stop Block: kmtools.com/collections/stop-...
Buy the Katz-Moses Magnetic Dovetail Jig: kmtools.com/collections/dovet...
*Buy the Katz-Moses Woodworking Apron*: kmtools.com/collections/workwear
Donate to The Katz-Moses Woodworkers with Disabilities Fund kmtools.com/pages/kmww-charity
----
Timestamps
Terrible Dad Joke 0:00
Intro 0:17
Sexy Parts Break Down 1:14
Creating Acute and Obtuse Complementary Angles 1:42
Sexy Angle Cutting Montage 3:32
Building the Base 3:58
Hitch Pin and Top Plate 5:32
Adjustable Height Arms and Half Lap Joinery 6:32
Building the Accessory Pieces and Accuracy 8:05
ANOTHER Sexy Build Montage Drilling, Joinery and FINAL Assembly 9:03
Wrap up AND What Tools I Used 11:15
----
Check me out on social media:
jkatzmoses
www.Facebook.com/katzmoseswoodworking
patreon.com/katzmoseswoodworking
/ katzmoseswoodworkingshop
----
Tools I love:
My Apron: kmtools.com/collections/workwear
My favorite Dozuki dovetail saw - shop.kmtools.com/dozuki
My favorite Ryoba saw - shop.kmtools.com/ryoba
Marking Gauge: shop.kmtools.com/dbmk
Marking Knife: shop.kmtools.com/dbmk
NEW Suizan Flush Trim Saw: shop.kmtools.com/flush
Narex Richter Chisels: lddy.no/ussg
Knew Concepts Coping Saw (best deal I’ve found): lddy.no/120mz
Dewalt Planer Package: amzn.to/2thEf6O
CMT Chrome are the Absolute Best Table Saw Blades (JKM10CMT for Additional 10% Off)- lddy.no/ggf9
Great Small Tape Measure: lddy.no/120n2
BLEM Combination Squares (high accuracy and value at a fraction of the price due to cosmetic scratch): lddy.no/120n3
The ABSOLUTE best Sandpaper on the market: lddy.no/10ucv
Dewaxed Shellac Flakes: amzn.to/2FeqqYh
5 Minute Epoxy 10% Discount code JKATZMO: bit.ly/30bA39o
2:1 High Performance Epoxy 10% Discount code JKATZMO: bit.ly/30bA39o
Dewalt Trim Router: amzn.to/3Ay6c7D
Dewalt Full Size Router Kit: amzn.to/3FH8Njp
Dewalt Planer: amzn.to/2YSkpiS
Bosch 1.25 HP Colt Router: amzn.to/3DzNjmF
Bosch Edge Guide: amzn.to/2uRRKs2
Bosch Bushings Set: amzn.to/2JUNRYb
Centering Cone: amzn.to/2OjgOAf
MY CNC MACHINES (I highly recommend both)
Bescutter Laser’s Website: bit.ly/bescutter
Avid CNCs of all shapes and sizes: bit.ly/3cdKdqA
MB01MHYMQRORNGY
MB01XBCVA05UHIB
MB01NTPIUBLFPFH
MB01LMWEOCVCZUW
MB01VWCHUQWA9EY
MB01U49Z2PEDUIX
MB01NTROROZTOZN

[@katzmosestools]

*Check out* kmtools.com *Step By Step Build Plans* shop.kmtools.com/3IDBCkt *Tools Used from KM Tools in this Video* *Rubio Monocoat NOW in the KMTools Store* shop.kmtools.com/rubio-monocoat *Katz-Moses Stop Block* kmtools.com/collections/katz-moses-tools *Marking Gauge* shop.kmtools.com/3YLSo6s *NEW LOCKED DADO approved in EU* shop.kmtools.com/3S9csgB *K-M Tool Apron* kmtools.com/collections/katz-moses-tools *KM Router Plane* kmtools.com/collections/katz-moses-tools *Chamfer/Round Over Plane* kmtools.com/collections/hongdui Center Punch shop.kmtools.com/centerpunchred *Glue Scraper* kmtools.com/collections/hongdui *CMT Forstner Bits* kmtools.com/collections/cmt-router-bits *CMT Saw Blades* kmtools.com/collections/cmt-saw-blades *Digital Angle Gauge* shop.kmtools.com/3lM8iiK *Digital Height Gauge* shop.kmtools.com/3Z72P4p *3M Xtract Cubitron Sandpaper* kmtools.com/collections/3m-sandpaper *KM Multi Sled FREE Plans* shop.kmtools.com/41ank1E *Tamar 3x3 Custom Cutting Angles Wider than 45 on the Miter Saw Video* kzbin.info/www/bejne/n4ayqax8eNx5gJo

[@myRefuge3710]

Hope you get better soon bro. Thanks for everything.

[@meatstick12gben]

I've been in construction for over 30 years and I never thought I would enjoy watching someone build sawhorses Awesome idea for a very versatile use of a set of hosses

[@katzmosestools]

Thank you my friend!

[@lucasgallagher8122]

Awesome book that gives you step-by-step photos kzbin.infoUgkxTNB_zFBSnTo_O1PqfVUwgi7ityw0JlKt and directions to make every day project. I can see myself making a few of these projects and giving them as housewarming and holiday gifts!

[@jayejaycurry5485]

Thank you owning up to your mistakes. Youre a really talented woodworker. Now I don't feel so bad about my own.

[@Brian_STL19]

These look awesome. I'd love to see a folding leg design of some kind. My shop is small and space is a luxury.

[@perfectagent0075]

"Get 'em bigger". Giggity giggity. :P Fantastic design!

[@It_is_littman]

JKM sounds like batman as a woodworker 😂 love the videos!

[@BigBrotherIsTooBig]

I loled so hard when you blurred that 2x 😁

[@slopes83]

LOL the eyebrows at @ 10:22! Great build and camera work, as always!

[@EvanDunville]

Awesome build! I have your stop block and apron they are both exceptional quality. I get so much more done when I have my apron on.

[@MCsCreations]

Fantastic looking saw horses, Jonathan! Great design and work! 😃 But, damn... You've got thin! 😱 I hope you have a full recovery soon! Stay safe there with your family! 🖖😊

[@katzmosestools]

I am in danger of slipping through a storm drain here soon 😂😂 intermittent fasting and stress is a spectacular weight loss program

[@petrsidlo7614]

I hate to see you sick, but that joke was very well worth it.

[@katzmosestools]

😂🥰😂😂😂

[@user-qg6fy4yp8t]

Looking awesome!

[@909_WoodWorks]

Cant wait to finally move and settle down so I could finally pick up one of the router planes!! Keep up the awesome work!!

[@garethmcmahon9769]

Hats off Sir! They are great looking sawhorses, like the options. Definitely a future project.....

[@Jackrob-dz6gh]

Excellent video, very educational!😊

[@michaelmclaughlin4374]

I've had this idea for some time I like your design better thanks

[@andykerstetter8010]

Very nice make. Thanks for sharing

[@ryankariukikimani4975]

Hi Jonathan, i find this inspiring, Looking forward to start up a workshop here in Kenya and your videos are instrumental guides.

[@thesawdustfactory]

Thanks for the build ideas.

[@katzmosestools]

My guy!

[@garrydye2394]

These need to be collapsible brother. Two of these in a small woodshop, which most of us have...small....is a rather large footprint. Would take up the room of a full machine possibly two. And most of us are trying to figure out how to get just one more machine in our shop. Just a thought.

[@katzmosestools]

Yeah I think you could easily make them that way but for my shop I’ll take the extra support. We put 2 tons on these sometimes. Cheers and thanks for watching

[@spycedezynuk]

I do agree to an extent I have a tiny shop But come on man if you have a shop then you are capable of using this idea and modifying it to fit your needs

[@BiggMo]

I just bought the Bora saw horses… very sturdy and collapsible. Not as convenient for height adjustments as this design though

[@samueldeter9735]

I think I'd rather make them easily stackable

[@mauriceryton]

Be inventive and adapt them to your personal needs. Nothing out there fits perfectly in anyone persons shop. Accolades to him for building exactly what he needs in his shop.

[@-11BRAVO-]

That Dado stack is awesome

[@samspade2519]

Nice idea. Thinking of a twisting base so they could store out of the way

[@galapagos4154]

Keyifle izlediğim bir çalışmaydı 🙏🙏🇹🇷

[@Binford81]

Love this idea

[@katzmosestools]

Thank you!

[@ianpearse4480]

I have a pair of horses with open top boxes on top as the frame to support my various platforms, they have mitred cut ends on 2x4's, which fit inside the boxes where the ends extend past the box to create handles. The platforms are then adapted to my needs with rollers (as outfields); dowel pyramids (for painting); Stops at one end (for planning); Sandpaper and rubber matting surface on one pair. Sacrificial boards as a bench hook for sawing and one set as a mitre box. I got some of these ideas from pneumatic addicts site.

[@MikeyJ_366]

A pun, a build, and JKM! My favorites! Thanks for the new video man! Any chance you could do more joint of the week? Looking good pal! Cheers🎉

[@murphymmc]

Not a big fan of roller supports, most of the time I need a support that isn't so squirrely. Having built supports that have a slick surface, i.e., laminate (Formica type) you get easy movement without the ever present run-a-way you have with rollers. Plus, you get a surface that is flat so a clamp is easily affixed. Just another option.

[@mauriceryton]

Great build, exactly what l need at the end of my out feed table to accommodate those longer cuts. I will figure out a way to make them storable as in fold up or hang up.

[@superduper312]

I made some of these like 10 years ago when I had to share my space with a car. I have a shelf on the bottom like 8" up and I just stacked mine on top of each other. The adjustable part will move up but not enough to fall out. Hope this helps. I would highly recommend making some.

[@PunkR0ckz09]

Dang, I wish they'd be 3 legged for stability and foldable/stackable (with a lesser wide footprint), they'd be perfect. I love the functionality of them and the look too

[@jimrosson6702]

Very cool 😎

[@katzmosestools]

Thank you!

[@davidzaleski8344]

As always amazing content. Been buying stuff off your site all week and am glad to do so. Im just sitting here trying to find that dam countersink bit you got that stops at the perfect height lol!!!

[@jesterraj]

A2x4 here in Trinidad is $150 in our curency..a box of power pro screws $68

[@MrBlakePratt]

Dirty J katz kills me 😂😂😂

[@UppsalaSal]

Feel better soon. The joke was a good one.

[@katzmosestools]

We’ll it was something hahahaha

[@stankrajewski8255]

Very nice build. Way back in the teens, you motivated me to look to spiral router bits as an alternative to swapping between dado stacks and single blades on my fancy finger saver table saw. Small shop woodworkers would like to know--can we achieve great dado and rabbet cuts at a router station?

[@katzmosestools]

Absolutely my friend. Don’t take more than the width of the bit, in depth at time.

[@richardclarke9966]

@@katzmosestools Should be 'no more than half the width', surely?

[@mariushegli]

I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.

[@williammcgee4606]

Another fantastic video! Hopefully you've already recovered since the release of this video! 🤜🤛

[@darodes]

Homie went from West Coast Katz-Moses to East Coast Katz-Moses with one illness lol Love the videos man.. get well soon!

[@theangrywoodturner9972]

Love it.. where did you get that cool marking knife ?

[@terobb0]

Looks like you’re using the Hongdui Mitre Gauge…curious to know what you think about it.

[@joshdemarco9270]

Love the video, but I did crack up when I first saw the thumbnail and thought "oh no, bourbon moth saw horse shamed him into building some new ones"

[@larryohara6513]

Nice,...but where/how does one store those when they are not being used?

[@tylerpupo2886]

A beautiful piece of over thought engineering. Saw horses are supposed to be put together on site with scrap wood to meet the needs of the job. I've thrown away nearly ever sawhorse I ever built. You're thinking too hard about it brother. Amazing work though! If I had the space these would be on every job I'm on!

[@dustyfetterhoff1926]

Still waiting for your release of the tools you talked about in your introduction of your router hand plain. They are things I for my shop would like to own and then leave for my grandchildren.

[@katzmosestools]

Yes! We were going to release them all this weekend BUT there was a quality control issue with the marking knives. Fixing all of them this week and releasing so soon my friend

[@ShaielYitzchak]

Par for the course, but, excellent.

[@katzmosestools]

😂😂

[@DIYDEGEN]

Do you have any plans to sell the pre assembled kit similar to the router table kit

[@Wondertounge1]

Watching the video I noticed you using double sided tape. What brand do you use? I’ve tried several types but doesn’t rip easily for me.

[@Wooddragonwoodworks]

If you don't mind me asking which app do you use to edit your videos

[@BiggMo]

Damn… nice looking dimensional lumber… straight, minimal knots, no wane … you didn’t find that material at the big box store. I’d have to order #1 stock from an actual lumber yard.

[@katzmosestools]

That was straight from the Home Despit

[@scottpollock1714]

ya just have to dig a little, you can usually find some decent boards a little buried!

[@BiggMo]

@@katzmosestools …no matter how deep I dig, HD’s lumber here has been knotty pretzels here in SW Washington

[@Shneebly]

I like that you used pins for adjustment--massively underutilized in shop projects (you only see pins in gym equipment for some reason).

[@katzmosestools]

Yes a good hitch pin is so cool

[@rmnimbus1]

@6:19 nice

[@peterisemann2299]

👍

[@pinnacleservices6671]

Do you sell these from your website?

[@PaganWizard]

I built saw horses similar to these a few years ago, but they are nowhere even near as nice as these look, and I'm sure, perform as well. Another top piece you can make for these saw horses would be to, take another length of 2x4, dado one side as you did for the rollers, and then top it with 3 inch wide neoprene. You can get a 10 foot roll of it on Amazon for about $15, and it has adhesive on one side, so it's just peel and stick. This is GREAT for holding something that you do not want moving around. P.S. Where can I find the hitch pins you used in this project??

[@roberte.6892]

how heavy are these?

[@stonee1968]

Dude....don't make eye contact like that, lol

[@cruzgarza07]

What is the countersink/drill stop used in the video?

[@joshdemarco9270]

Amana 55227. I have one and it's amazing.

[@thesjyoungjr]

furniture quality saw equines. Who would have thought

[@jasonbourne314]

I've never understood why creators spend 99% of the video showing how to make the product but only 10 seconds demonstrating how it works. I would be nice to see it use

[@dustinhenderson8324]

I just found out that KZbin had unsubscribed almost all of my woodworking channels or changed the notification settings

[@charlesdodge604]

Stay on top of that pneumonia. Had a coworker die this last weekend from an upper respiratory virus they caught on top of their walking pneumonia.

[@jesterraj]

No miter saw?

[@katzmosestools]

I hate using miter saws. I think the table saw is so much faster and more accurate. Or at least way more accurate and the dust collection is so much better.

[@jesterraj]

@@katzmosestools Hi from the Caribbean!

[@robertborberg6427]

I am utterly disappointed… Jonathan Katz-Moses you sanded a dowel chucked up in a drill with sandpaper in your hand and you did not make one ladies and gentlemen reference. What is going on dude……😂😂 all joking aside great video happy to see you’re doing them again🎉and hope you feel better soon!

[@peterbeyer5755]

If your going to leave your fork lift blades in the air I would put a traffic witches hats over the ends!

[@adamtheroofer3659]

These are huge and bulky. The classic saw horse built with 2x4s are so universal. I do not believe the style you have created will hold very much weight. Then it also appears top heavy. I built homes for over 20 years and have tried a lot of sawhorses. These would not be a good choice for that. Plus you really wouldn’t want to cut anything on these. So they are more aptly called OutFeed horses.

[@katzmosestools]

We’ll, I’ve manufactured and designed tools for 7 years and was a home/commercial builder for 12 years prior. These will hold 2 tons combined (easy) and when you remove the rollers top plate they function exactly like a sawhorse. So basically agree to disagree.

[@HickLif3]

The heck you building that you would be breaking these by sheer weight? it would get so big that the extra saw horses would compensate for the weight. I do agree though that the basic I beam is probably more than enough for anyone and is easily modified in a pinch for a roller outfeed or whatever if needed. plus they're cheap and quick to make from 2-12' 2x4. set a cut stop at 36" and just bang it out

[@adamtheroofer3659]

@@katzmosestools I built home for over 20 years and have been in the construction industry for over 30. I worked for engineers and also do custom wood working. On one of my sites these would break due to the 3/4” sides. I can agree these would be ok in a shop format. You could set them in place and they will be ok. If you have to cut rafters and large heavy objects like insetting a steel flitch plate between some LVLs this would not be the application. Typically we would also use ours for scaffolding and I would not trust this design to hold people working. I do not see their load levels in a torque situation holding very well. No matter your experience in all else these are just not meant for serious work. It’s ok. Loads of people do need to have something like this. I would just use an outfeed table or stand. It would be cheaper to build or buy. My opinion!

[@ouchymytoe]

Plans are $15 at this time.

[@KOutOfMyYard]

Get healthy brother

[@SRG-Learn-Makers]

Those sawhorses cost more than my car.

[@katzmosestools]

Lumber is cheap again! This was $100 total for two.

[@SRG-Learn-Makers]

@@katzmosestools Rollers, misc hardware, working hours... all that don't even matter as my car cost me 200€ although those sawhorse probably can hold my car in it.

[@mr.klutchrednose2700]

LOOK @ MR.JIMMY KIMMEL THE WOODSMAN 👍🏿👍🏿👍🏿👍🏿