Transforming A Stock Mustang GT Into A Roush Car - Horsepower S14, E6

[@ThaMetalMan]

Dude Joe is an absolute legend. I'm 34 and have been watching him on TV since the early 90s. I remember my dad and I watching Hot Rod TV when I was 4/5. Joe's the man

[@ricardocorbie6803]

That 4.6 was bulletproof, can’t hardly kill those things!! Great content!

[@gtellez1990]

10 psi through a 2.3+ blower would disprove this

[@robertm2172]

When you said 4.6 I wanted to move on but then I’m in need of a good laugh so here we go!

[@ThaSilentOne420]

4.6 4v is a destroked 5.0 smfh ppl who think they know cars but dont . Funny 03 04 cobra still rules the streets today which is a 4v 4.6

[@gtellez1990]

@@ThaSilentOne420 no it is it not, the 4.6 on these is a 3 valve. 03/04 cobras aren’t ruling anything. Even whippled on stock bottom end my 5.0 on 8psi will send them to gapplebees. On 15psi and e85 it’s not even worth my time.

[@GSXSF-250]

I first saw a Roush Mustang back in 1984 in Dallas, Texas.

[@jameshowlett8811]

Wish they put the date the episode came out in the description

[@kinotransam]

FYI, most of the shows and episodes on this channel were aired on TNN-SPIKE-PARAMOUNT network TV channel as far back as 20+ years ago. This one was probably aired in 2010

[@xbo_x3ui1der17]

Yeah I noticed that isn't it weird

[@NissanTy]

So long for the 4.6 3 valve days. Thats stock coyote numbers with the blower on that car

[@meanf1502]

Yes it is but when this was filmed the coyote wasn't even thought of

[@waveformdistortion]

@@meanf1502 It should've been. The Coyote is such an improvement not because it's some super advanced high tech engine (it's really not), but because the Modular engine was outdated when it came out. They've always been boat anchors in waiting.

[@TwentytenS4B8]

This show was aired in 2010. Coyote was still a year off from release. Stock 4.6 3V in 2010 put out 315 HP and 325 Ft LB torque. Something isn't right with this build. They said they got 378HP at the wheels after mods and 272 before. So with a supercharger, ,exhaust, and intake they only made 106 more HP? With all that plus a tune, the power should be way more than that. Probably because they didn't upgrade the fuel pump or tune it properly. They just used a general canned tune and didn't do anything with it. Roush sent them something to get it running somewhat properly which was probably nothing more than calibrating the PCM for the larger injectors and that's it. You can get 106 HP from exhaust, intake, and tune alone. But that is sad output with a supercharger as well. Literally same numbers as just bolting a supercharger on a completely stock car with no tune, no exhaust, no intake, etc.

[@bmstylee]

@@TwentytenS4B8 they didn't do a cam swap. That would be my guess on the low power. The blower and tune are nice but without more cam it won't make nearly what it's capable of.

[@jasonmccarthy820]

That ending was better then the whole video lol. Rare to come across a video that snags you at the end.

[@MustangGuru]

You can out run the Radio, if they can’t see you there is nothing to report except last known location.

[@marceguzman9613]

great show congrats

[@bwtjma183]

A little disappointed you guys didn’t put a chrome cold air intake to compliment the engine bay!

[@machninety7334]

Ok, that was impressive. Now try that on a car thats seen 3 Ohio winters.

[@bmstylee]

Looking at replacing my 17! Silverado exhaust and cringing looking at the hardware after 5 Cleveland winters.

[@quickdeuce]

@0:28 he says "it's the 70's all over again." We motorheads are luv'n the horsepower wars between the MoPar, Ford and Chev designers are sending our way these days BUT the ol feller missed it just a bit, the mid to late 60's should have been in that comment. Lest we overlook the big block's all three sent to the public commencing in the mid 60's. We must admit however today's muscle is so much more powerful, dependable than yesteryear's factory hotrods. Today we have tiny 4 cylinder cars capable of blowing the cars we thought were hot off the road and that's too cool.

[@carlrice6989]

Has Matco Figured out how to make a PINLESS Impact Wobble Socket,,,? They were working on that 20 years ago,,,

[@Airman..]

Pin design is superior to pinless Many manufacturers didn't adopt it

[@WDMtea]

Interesting build

[@TJsVette]

They make it look so easy lol

[@Alanthe918mobilemechanic]

Why not a bigger throttle body?

[@marcoscastillo1650]

Great job!!! Can you please come pick up my Caprice?? 😉

[@thatfordguy2268]

Roush Super charger with a paper air filter and stock intake plumbing?! 😱 Hahahaha

[@lonnien.clifton1113]

That was a good one y'all

[@meanf1502]

Nice car Joe an like them cobra r wheels

[@aash9628]

When did you guys make this video?

[@jonstrande2074]

And see the EPA is trying to pass a bill will you can't do any of these things. Vote on the rpm act.

[@melmarks3854]

Funny at the end!!

[@brianclifford9597]

Should have used a coyote car

[@tinydancer4015]

Is anyone else confused by the "unsolved mysteries" background music while they're working? Go back to the crappy guitar riffs 😂

[@TwentytenS4B8]

Too much modifying the stock components. You can install a Vortech or Procharger kit and get the same if not more power with ALOT less cutting up the factory coolant lines and harness. Every one of these videos overlooks an important part of adding boost and that is upgrading the factory fuel pump to a high volume unit. You can install the biggest injectors on the market, but if the fuel pressure isn't there to feed them you will lean out under boost and not make the power you should if you're lucky. Most of the time, leaning out under boost means roached pistons and a destroyed engine. All that work installing a SC on top of exhaust, intake AND a tune and only making 106 HP over stock? You should be able to make 106 HP with just the exhaust, intake, and tune alone. What this tells me is the juice just isn't worth the squeeze with this particular build. Why would I hack up my heater core lines, wire harness, and alternator for a measly 106 HP when I can get that with a proper tune, exhaust, and intake? Roush just sent them a baseline tune which was most likely nothing more than calibrating the PCM for the larger injectors and that's it. Upgrade the fuel pump and dyno tune it with a competent tuner and then let's see the results.

[@johnwindle6877]

Good video but the last was the best lol

[@s0uthp4w68]

cooper tires lol

[@tevetanders9729]

Fun

[@reggiep3369]

NOOOOOO not a convertible 😫

[@bmstylee]

In before TX whines about it not being a Fix It Again Tony.

[@rggt6225]

These guys always shy away from DOHC Engines. They have only done like3 DOHC Engines. Ratio of like 20to1 pushrod vs DOHC.

[@darrellcummings1250]

🤣🤣🤣

[@matt4thgenss]

weak 4.6 not 400 even to the tires 👎👎👎👎👎