Traulsen G22010 Freezer Repair

[@richardboyle3142]

The only bad thing about watching your NorCal adventures is: You can only hit the Like button once.

[@aaronward7526]

I'm a fan of Trsulsen as well. Have had good luck with their warranty.

[@RG_sssSMOKING]

Good one Dave. U rock man! Thanks for taking us along with you.

[@benkuxhouse787]

We have a lot of traulsen equipment at the school district where I work. I use a lot of Beverage Air drain line heaters in them they fit perfect I've had a few issues with them freezing up the drain line. The Beverage Air drain line heater fixed in just about any reach in freezer.

[@WswRefrigeration]

Man those n95s were so hard to breath in. I rocked those out for a good while in the beginning.

[@FlyEaglesFly19111]

Good stuff brother Dave.. thanks for sharing.. be safe out there. Funny I blew a rookies mind letting him see how TESTO gauges work.

[@terrytugwood7848]

Imperial Eastmann benders 👍, nice video Dave

[@FireandFrostHVAC]

I agree with you about Traulsen equipment Dave. Good video, thanks.

[@Dave-dr4yy]

Agreed that Traulsen is the best Dave! The evap fan motors cost a small fortune though.

[@BlackHawkPSU]

What about the new Traulsen's? Just as bad as everything else these days?

[@Dave-dr4yy]

Cheap and crap like the others now now they can compete with China. I let all my techs know that we fix the old ones and do not replace.

[@jonathanflynn7915]

Really enjoy the videos Dave true pro and love the positivity of all your vids👍

[@NorCal-refrigeration]

Thank you.

[@billymonroe9574]

Thanks to ya ive used that condensate loop trick, worked out awesome

[@jeffbarnowske5598]

Nice video! I'm interested in those generic sensors you had on the truck. You got any info? from Amazon?

[@brenta1905]

I agree with the Traulsen opinion. My experience has been great for the most part. (Always an anomaly somewhere) Good work Dave!

[@randyowens2717]

Beautiful country side! Good to know about Traulsen!

[@justinmeier7822]

“All the moisture will go back in the system don’t sweat a dryer” 😂 that’s what a vacuum is for my dudes

[@tcphvacr9950]

The scenery on the way to the job was pretty sweet. I have the same Imperial swage/flare kit, had it for about 18 years. Just used it last week to replace a section of 3/8" copper. I use it mainly for stuff 3/8" and smaller, no splits and nice and round. Try to keep that one low nut out of the toilet water :-D

[@NorCal-refrigeration]

🤣😂🤣🤣🤣🤣🤘⚡️🤘

[@shine-cg9uf]

Great job. Thankyou

[@joshh5912]

You da man, Dave! Keep rockin, and stay safe!

[@gregbowman3598]

Good one Dave , have a couple those in my restaurants , Good equipment, stay safe brother

[@brucecrutchfield9459]

Who makes that bender? Mine only does up to 90°.

[@OcRefrig]

i think this is the one he used in this video. www.zoro.com/imperial-tube-bender-14-316-38-and-12-in-cap-370-fh/i/G1468336/?gclid=EAIaIQobChMI78zY8ODk6AIVQgnnCh2k8AxcEAQYASABEgLE3vD_BwE

[@bluedogdataelectrical6303]

Thanks Dave another good video.. stay safe

[@Sauldtr]

Muy buen vídeo amigo, es un honor ver lo bien que trabajas, saludos desde españa!!

[@wwolf771177]

Easy money. I got the same bender and the other black one from the same company. Spinswedge FTW. What do you do for those like snail type loops?

[@NorCal-refrigeration]

I’ll wrap the copper around something round, or order the oem.

[@arturomacias4788]

Hey man I have a traulsen freezer G12010 that is not cooling the digital controller saids C25 , the condenser fan is not starting and the starting components just click I was thinking that was the problem so I replaced them but it is still doing the same thing my next move will be the actual fan itself was just wondering if you could give me your input on it

[@ConservTab-sv3kx]

Nice and Quiet for change

[@gavelboy01]

Be safe out there Dave. We're holding down the fort here in Florida. Doing all of my repairs from home for now

[@skater78207]

So I was called to service one of these and it was frosted up . Any ideas what it can be I was thinking sensors or maybe the lid not being shut tight.

[@ia9562]

Hey Dave big fan I have a question for us guys doing side work. How do you decide your pricing? For parts and labor?

[@NorCal-refrigeration]

I’m a licensed contractor. I charge full boat.

[@jfiguet205]

Question: what catalog is that one? And Where I can find one? Thanks!

[@jarrodmcdermott9109]

I just worked on that model of traulsen 2 door freezer yesterday. Cabin sensor was bad causing high temperature display on the digital tral....Dave was I supposed to use silicone on the gasket of evap box prior to putting lid back on? ? If so, then I messed up I didnt have any on hand. Also, what kind should I use for sealing cases and stuff? Lid had four 3/8 bolts.

[@NorCal-refrigeration]

Not if it’s in good shape. Mine was trashed.

[@hansnunez5002]

Bud I need your help. I have exactly this same Freezer G22010 and the heating defrost element is damaged. Can you tell me where to get it? And the part number. My freezer is pretty old may not be the same . I have seen a parts manual in one of your videos but I can find it. To look it up. Thanks!

[@NorCal-refrigeration]

Refrigeration hardware supply you can find them on line and call them.

[@joeneal21]

Whats that book you have in your van with the part numbers?

[@alekmartinez3109]

Are you at that Brazilian restaurant? I love that place

[@stevecochrane9657]

Love it one nut lower than the other 🤣 just made my day cheered me up 👍👍

[@RichGT350r]

Thanks Dave! Be safe!

[@anthonylupchinsky7106]

Love the videos. Stay safe out there.

[@TheLenaweeTrekker]

The newer Traulsens have that fan assembly that you have to replace when the evaporator motor goes bad, but that's the only thing I can say that I don't like about Traulsen. I actually got out and about today. An old B series water cooled unit locked out on high pressure safety. Water turned off to the building and a bunch of metal plates on the road. Ain't hard to figure out that one. I felt bummed that I couldn't help, but I showed him what to do when the water department finishes their job, and I returned to oblivion. Oh well, when this is done, I'm sure I'll have 12 hour days again.

[@NorCal-refrigeration]

It will be so busy!

[@OcRefrig]

⭐️ Things to do - on Lockdown . Stay at home to not get sick. 1. Laundry --- 🥳 2. Dishes --- 🥳 3. Grocery shopping 4. youtube learning / schooling. 5. Back-up to harddrive --- 🥳 6. Upload vids 7. Compact vids. 8. Re-Charge batteries, rechargeable kitchen light , headlights & white pak. 9. Cook a roast & baked potatoes 🥳 ✅🏝 10. Make Bread 11. Make Cookies 12. Make a Beef stew 13. Shave Your balls.

[@TheLenaweeTrekker]

@@OcRefrig I discovered a microwave oven in the house, just after I was laid off. I can eat at home..., who knew😉

[@justinmeier7822]

“Close enough for gov work” 😂😂😂 fuckin hilarious

[@shandypoh]

Love the videos... keep them coming

[@NorCal-refrigeration]

Thanks

[@frankandrade5227]

Can you put a link to what type of bender that is please

[@Colt-wr6wx]

I have so many of these at my job and they last forever just mainly maintenance witch is hard because our kitchens are ridiculously small!

[@guybeavers6026]

I've been looking for a Hi/Low bender, what do you recommend, the 40+, 50+ or 60+?

[@NorCal-refrigeration]

That’s made by imperial dose 1/4”-1/2”

[@OcRefrig]

imperial makes a Little black bender. does 1/4" -3/8 thats alot smaller tgan that one too. That ones a cool bender though. imperial Makes the best benders. the Little Black ones or this one , Either is a Smart move to Get. i Dont use 1/2" that much. so, the Smaller black bender works better for me.

[@OcRefrig]

heres the one i use. its very compact. super durable. had it for many years. www.amazon.com/Imperial-Tool-368FH-Triple-Header/dp/B001HWFI0W

[@sjefoekel6058]

@@OcRefrig i have the same, they dont do 180 degree.

[@kidalwys]

@@OcRefrig need to upload more videos of work lol no more cooking

[@throttlebottle5906]

"one hung low" lol

[@NorCal-refrigeration]

🤣😂🤣😂

[@RobertL78]

I like the “good enough for me” on the sensor values. HVACR videos would have swapped the whole controller and probes if it was 0.5 degrees off.

[@NorCal-refrigeration]

🤣😂🤣😂🤣🤣 like I have always said. You do it your way I’ll do it mine, and there both just fine!

[@HernanAnzola]

And 15 minutes in the end talking about it

[@OcRefrig]

@norcal --- Agreed ! in the voice of Will smith --- you do you , and i do me.

[@OcRefrig]

at robert --- ikr. i have a Flat tire. i Think i need a new Truck.

[@xraybravo7180]

@@OcRefrig lol

[@Jeepjones85]

Yes the tiger king was crazy lol I hope that other lady gets what’s coming

[@NorCal-refrigeration]

Me too

[@harrydickson4575]

Lower hanging nut 🥜 lmao 😂🤣🤣👍👍👍

[@NorCal-refrigeration]

🤘⚡️🤘😂😷😂

[@analogmoz]

I think it looks nice with the lower hanging nut.

[@DWAYNE2ism]

The parts book where can I order it.

[@NorCal-refrigeration]

Refrigeration hardware supply

[@raytinsman2672]

Real working man! Now, how a real working man cooks series...……. \

[@NorCal-refrigeration]

That and I’m getting a mascot. Lol

[@xraybravo7180]

Good job

[@miguelesquivel3169]

What brand is that tubing bender and where did you get it??

[@NorCal-refrigeration]

Imperial, amazon it dose 1/4,3/8,and 1/2”

[@miguelesquivel3169]

Thank you!!!

[@IFIXCASTLES]

A working man lavotomy.

[@winkhvac62]

0:35 beautiful scenery

[@inoahmann7542]

Would painting the condensate loop stop it from rotting out?

[@NorCal-refrigeration]

Anything couldn’t hurt. We’ve made them out of stainless tubing and they still leak. Water n heat eats everything.

[@inoahmann7542]

@@NorCal-refrigeration very interesting. Thanks for the reply. Stay safe.

[@throttlebottle5906]

acidic or alkaline water and PH out of whack will eat everything and anything, typical condensate water :)

[@inoahmann7542]

@@throttlebottle5906 I guess the only way to stop the condensate loop from rotting is just to not have one.

[@throttlebottle5906]

getting rid of the loop and going to a electric heater helps a bunch, but it still builds up inside the insulation on the lines from evap. to compressor and those corrode away, as well as other key areas.

[@rogerdegray7535]

Where are you located in No Cal?

[@NorCal-refrigeration]

Santa cruz

[@gonzgarr1592]

O.K. Steve Lav next you will have a sponsor

[@NorCal-refrigeration]

Hahaha. Not a chance I put to much silly stuff on my channel

[@sterlingarcher46]

I was surprised not to find a pluggo buggo ! Btw , what's the difference with the foil tape , looks the same innit ? Nice one blud 👍

[@NorCal-refrigeration]

It has thick pooky glue on it.

[@sterlingarcher46]

@@NorCal-refrigeration That's what she... Never mind , sorry !

[@winkhvac62]

Like that Tool box!

[@NorCal-refrigeration]

I have 7 total draws. It’s on my van video.

[@WswRefrigeration]

Why the flux when unbrazing the drier?

[@NorCal-refrigeration]

Pipe comes out clean

[@WswRefrigeration]

Have a link to the amazon sensors? Looked up those numbers but nothing popped up

[@NorCal-refrigeration]

Vig 37 XLX 10Pcs NTC 10K Thermistor Waterproof Sensors Digital Temperature Probe for Refrigerant Air Conditioner and Refrigerator(100cm) www.amazon.com/dp/B078SQH536/ref=cm_sw_r_cp_api_i_38OKEb07DN9TZ

[@xraybravo7180]

What size copper ?

[@NorCal-refrigeration]

3/8”.

[@terryjohnson7888]

It amazes the haters in this world . Thumbs down for what , just go away and work on the personality . Tiger King lives a town north of me . I was confused who that was because we have a few places like that around here .

[@powerpooch2000]

Is this the blind people episode?

[@NorCal-refrigeration]

Yes

[@alessichris07]

👍👍👍

[@davidharmon8745]

Where is the light.

[@joetramutola5046]

I don’t know what do I do do I raise my rates if I go out during a pandemic I mean people raise the rates when gas was high as a surcharge I guess I just suck it up

[@NorCal-refrigeration]

I’m the same price, you gonna need your customers when this over

[@EyesofIllusion]

🤙

[@steveblake8766]

#167 thumbs up

[@nattcurii]

Traulsen model URS 48 DT volts 115 help Spanish

[@jarrodmcdermott9109]

Oh pukee tape okay I know that for next time

[@brandonprice3927]

Stay safe and stay washed up Dave. I need your email address for a couple of questions that I have for you. Please HMU and let me know. Thank you in advance.

[@bradmurray9401]

🤣🤣🤣🤣 Tiger king

[@DWAYNE2ism]

Lol nut

[@fourstringplayer1]

Joe got screwed

[@J5NJAX]

#freejoe

[@OcRefrig]

( Ftngot ) on Traulsens i Prefer to Eliminate the condensate Loop & use a Electric Heater in the drain pan. They Make one just for traulsens. its cheap & i stocknit on the truck. Eliminates it ever happening again , But Either way works just fine.

[@primetime758]

you are not suppose to Eliminate the hot gas loop 1. it Helps Bring down the Highside 2. Electric ones Heat up the space like crazy

[@OcRefrig]

@ prime --- Sorry man , But u are Wrong on that one. 1. You can order a New Traulsen with Electric or Hot gas Condensate evaporation. its Just a Price Thing. as is EVERYTHING. Electric Condensate Is a $100.00 add. it is also done to give the unit a Lower amp draw for energy standards. 2. Traulsen - Makes a Specific Heater Just for thier Pan. Here is the Part # www.partstown.com/traulsen/tr329-60001-00?gclid=EAIaIQobChMIwM2J2K_k6AIVFQnnCh37UwwBEAQYCyABEgKSDvD_BwE 3. it does not add any more heat to the room than a Hot gas Line Does. it is Thermostatically controlled. when it is Above a certain temperature it cuts itself off. it only works when necessary.i think they are only 300 watts too. you think 300 watts is going to make any difference in a hot kitchen.i dont think so. 4. ive been doing it for 40 years. Units Work just fine to Better & customers are Very Happy that they Never have to pay that Repair cost again. 5. it also increases the Reliability of the unit , no more condensate loop leaks EVER AGAIN !

[@Colt-wr6wx]

Pan heaters are the way to go! Easily replaced!

[@OcRefrig]

Yep. 5 minute job. Traulsens even have a special Plug on thiers that plugs right into a female on the unit.

[@Colt-wr6wx]

Exactly! Even if you have to hard wire. No big deal

[@OcRefrig]

Good vid ! Why did u Replace the sensors ? Totally agree with u on Traulsens , Totally Rebuildable. as Long as Box is Good / no Holes in the floor. Traulsens can go for 30 years or more.

[@NorCal-refrigeration]

They were bad

[@OcRefrig]

i guess i missed that part of the video.

[@NorCal-refrigeration]

OcRefrigeration , Hvac & Electrical Video's. I edited it out my bad.

[@xraybravo7180]

What kind of place is that?

[@NorCal-refrigeration]

It’s the restaurants storage room