Triple monitor stand build using 15 series aluminum profile

Building a triple monitor stand using 15 series (almost the same as 40 series) extruded aluminum otherwise known as 8020.
My apologies for the less than professional filming and audio.
Parts list
2 x 48 inch 15x30 for vertical posts
1 x 48 inch 15x30 for central monitor section
2 x 24 inch 15x30 for the side monitor sections
2 x 25 inch 15x15 for the feet
4 x 1x1 brackets for connecting the feet to the vertical posts
2 x 4x4 brackets for connecting the central monitor support to the vertical sections
2 x 15 SERIES 3″ PIVOT NUB FOR DYNAMIC PIVOTS
4 x 5 SERIES 1.5″ PIVOT ARM FOR DYNAMIC PIVOTS
24 T-nuts and screws
3 x 100x100mm Vesa Bracket www.amazon.ca/...

[@BeaverCops]

YO AFTER REWATCHING It makes sense & their diagram is NOT what you did in the video you sir helped me on my path to sim racing

[@simracingmontreal1038]

My design is based on the model from Simlab. I used the profiles from their 100/200 design but with the 100mm VESA mounts and different pivots. Did it finally work out for you?

[@BeaverCops]

Sim Racing Montreal honestly if u have it, my discord is beaver#1977 add me I may have some questions (just trying something, my pivot point was sagging)

[@MustangFastback]

Hey thanks for this! I'll be building the same

[@sachinfernando4354]

Hello! Can you please link me to the VESA mount brackets?

[@olivierlandry1195]

difference bettwen LIGHT SMOOTH T-SLOTTED and SMOOTH HEAVY T-SLOTTED any of the 2 you suggest ?

[@4Kcorner]

would this hold 55in screens? great video!

[@glennnsanity4091]

hello, what are the sizes of the nuts and bolts that you used?

[@matteolegault]

what length are the T-Nut screws?

[@simracer1256]

Im surprised you used 40x40 for the feet - it looks rather insufficient to me. With hindsight, do you feel 40x80 would be better for the feet?

[@simracingmontreal1038]

Not really. It's pretty solid. The monitors are not that heavy. It's based on a Simlab design that uses the same size for larger monitors.

[@devingeorge7476]

Do you have to use the locking screw on the vesa mount, or will it work without it?

[@boiboiboi1]

Thank you for the guide! Really helpful! But for mine, I think I'd add caster wheelss on the feet. Do you think it will still be as stable as the one without caster wheels?

[@simracingmontreal1038]

I had in fact purchased casters but it is so light that it slides very easily on my wood floor so i didn't use them. Maybe on carpet ot would be easier to slide with the casters.

[@boiboiboi1]

@@simracingmontreal1038 I see. I guess I'll have to look for casters that have locks on it. Thanks for the reply!

[@apocalysque]

Where did you get the VESA mount brackets? I'd like to build my own but I haven't found brackets that are affordable/good.

[@simracingmontreal1038]

www.amazon.ca/gp/product/B0069MCT2A/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

[@GoSolarPlz]

With 24” monitors I suppose the feet have to be brought closer together? How stable is it? Do you think it’ll be stable on carpet? Thanks

[@simracingmontreal1038]

For smaller monitors you just need to adjust the placement of the swivels for the side bars. You don't need to adjust the feet but you can if you want.

[@GoSolarPlz]

Hi. What’s the distance between the footings (the legs) at its widest setting?

[@timt8199]

Thank you for this guide. How has the setup been now that you've had it for a few months? Anything you would change? Do you think the Lite aluminum extrusion is strong enough? Thanks.

[@simracingmontreal1038]

Yes, it's very solid. Only if you use larger monitors I would go with the larger corner pivot brackets. You can also add some casters if you want to put this on carpet so you can roll it easier. On wood floors it is quite light so it is easy to move.

[@able724]

How even did the monitors end up lining up? I've got 3 27" montiors I use and while I currently own an Obutto R3v with a tripple monitor stand, the three monitors barely line up across the top and getting them even close was a ton of work.

[@simracingmontreal1038]

I think the trick is to place the left and right monitors with the Vesa mounts on the arms but not completely tight so so you can move them left and right until they align. Then you can remove the monitors and tighten the mounts on the side arms.

[@able724]

@@simracingmontreal1038 Sorry, I should have been a little clearer I guess. I mean they align vertically, across the top and bottom, not side to side.

[@sorianosn]

Thanks for sharing! Curious where did you buy your brackets and aluminum parts you can recommend online purchase?

[@simracingmontreal1038]

I bought all the aluminum pieces and hardware from Faztek in Montreal. Depending on where you live you can find them at 8020.net.

[@kngamer760]

where do you buy all this materials to build the stand?

[@simracingmontreal1038]

Faztek. In Ville St-Laurent if you live in the Montreal area. Ask for Derek. Otherwise you can check online at 8020.net

[@tigim101]

are you sure the vesa screw size is 5/32? doesnt look like that much smaller on camera. Also how do you secure the pivot joint once its mounted so it doesnt move anymore?

[@simracingmontreal1038]

The pivot is screwed to the profile using 2 T-nuts. It holds it well but I would say 27' monitors are the max. The pivot arms are held by a screw and nylon washer which permits them to pivot. The arms are able to move so you can open and close the monitor position to move in an out of your rig. They are not flimsy though. They stay in place when positioned where you want them, See the pics in this link Hope this helps. www.dropbox.com/sh/anbgw4k5ho62glv/AAD2xjv5qo9EiuOhqBLi2dH9a?dl=0

[@tigim101]

@@simracingmontreal1038 thank you! this clears things up, I was able to find all the parts in your description on 8020.net (Im in USA). So the arms just have enough friction to not move unless you push on them?

[@simracingmontreal1038]

@@tigim101 Yes, that's correct.

[@vickgandhi]

Hey, does faztek have these plans? or were the plans custom?

[@georgeelmer6440]

Did the brackets come with the vesa plates? Been looking for some like this with no luck.

[@simracingmontreal1038]

Yes, this is the one I got www.amazon.ca/Monoprice-Fixed-Wall-Mount-Bracket/dp/B0069MCT2A

[@mohdariffin5487]

What the aluminium you use?

[@simracingmontreal1038]

15 series aluminum. It's the equivalent of 8020.

[@yguessous]

Hi i have 3 * 32 inch curved. is it working for 32 inch with this mesure

[@simracingmontreal1038]

The measurements would work but you should use the more solid corner pivot brackets to hold the side arms.

[@krc5099]

Hello 🇰🇭🇰🇭

[@marinosandiford6841]

Est ce que cela convient a des moniteur 32 pouces?

[@simracingmontreal1038]

Oui mais ça prend les plus gros swivel bracket comme ceci www.fazstore.ca/product/15hi8860/

[@OkiDingo]

Roughly how much did you spent to make this stand?

[@simracingmontreal1038]

Roughly 300

[@cykosyc]

where did you buy?

[@simracingmontreal1038]

Faztek in Montreal

[@Padubman]

Will this work with triple 32” curved monitors?

[@simracingmontreal1038]

I would suggest larger Vesa brackets for 32"

[@LivetPaaRacerbanen]

Whats The Price? Is it cheap?

[@deanfretwell3417]

How much does the frame weigh?

[@simracingmontreal1038]

It weighs approximately 35lbs or 16 Kg

[@skinb088]

How much did it cost roughly

[@simracingmontreal1038]

About 250 plus the VESA mounts from Amazon.

[@manny_f]

Does it wobble?

[@simracingmontreal1038]

No wobble.

[@BeaverCops]

This from faztek?

[@simracingmontreal1038]

Yes

[@BeaverCops]

Sim Racing Montreal hey man I have the same I just ordered it, I (few really minor differences but nothing) I’m having issues setting up my 27inches, the crossbeam is too big & I don’t understand how to align my monitors properly, there’s a HUGE gap between all 3

[@timt8199]

@@BeaverCops slide both swivel brackets closer towards the center.