Trolling Motor Tips: A Potential Fix for Lowrance Ghost Problems

[@douglasbraun7560]

What an unbelievably, informative video. I have installed firmware for the second time with my lowrance, and it always seems to malfunction after I do. This video, was fantastic! Fixed all of my problems. The people at Lowrance, bless their hearts, seem to be lost in the sauce most of the time. I'm done wasting time on the phone with them. I'll continue to watch your videos and if there's something that you don't cover, I'll certainly be calling your shop directly. Thank you, very much!

[@chrisputh2644]

Awesome thank you! Most informative I have seen

[@roth515]

Amazing! The service configuration mode steps is exactly what I needed!!!

[@fishing_life_ca]

I've been waiting for you 2 years, a good man! Thank you!

[@rdaniel3451]

Great video, thanks for posting!

[@001Hank]

Thank you! Awesome video, Great Information!

[@tomsolem1436]

Awesome video, really well explained!

[@Salmaans_]

Could you maybe do a video on how to calibrate the Spotlock again for those motors who go crazy while in Spotlock

[@blindbasser]

What if head arrow flashing and nothing works ? No sound just flashing .

[@basscolonel]

Thanks for the video!

[@meltonhorner8463]

Thanks very helpful

[@billroy7959]

I am having issues with my ghost just powering off for no reason. usually happens at the beginning of the day but not always. And usually when its hard left or right and you initially step on the pedal. It powers right back on and works fine. Would this process help that? I also heard you mention a positive stop, mine hits a positive stop both ways, is that not normal? Thanks so much for your help!

[@billroy7959]

I am having issues with my ghost just powering off for no reason. usually happens at the beginning of the day but not always. And usually when its hard left or right and you initially step on the pedal. It powers right back on and works fine. Would this process help that? I also heard you mention a positive stop, mine hits a positive stop both ways, is that not normal? Thanks so much for your help! Bill

[@matthew5032]

I am having a problem with my spot lock turning off, after It does this when I hit the anchor button again the direction arrow on top of the trolling motor flashes and no spot lock. Do you think doing these procedures could help this issue. Thanks

[@RandySullivanBassinVids]

Its possible that it will help. Its worth a shot to try.

[@xrichiex3]

Best damn video. Thanks guys

[@timduckworth8628]

How long should it take when u reset it when it's flashing between 24 and 36 volts.

[@mickeyboland7398]

What if your trolling motor is 36 Volts?

[@RandySullivanBassinVids]

The Ghost runs 36 or 24 Volt

[@fishing_life_ca]

Based on Lowrance instruction kzbin.info/www/bejne/l6bcdoCGbsurb9U&ab_channel=Lowrance , they align the direction with the boat and not with the lowrance sign on the trolling motor which is confusing.

[@BrushyCreekMarine]

That is the bow offset once mounted on the boat. This video recalibrates, and also reprogram's the boards back to factory settings. It is what we try first before we Starrt changing out parts. And this information was not found in the owners manuals.

[@tonyford3323]

@@BrushyCreekMarine I had to do the 12 steps 6 times before it finally took,what is causing this problem and can I replace something to fix it?