TRON Arcade1UP Flightstick Trigger MOD and reinforcement.

[@christopherpurvis1311]

thank you -- ordered the split collar.

[@jameszouris3850]

I changed the microswitch and added the JB weld. I haven't added the split collar but maybe later. Thanks for the video!

[@yeksun]

Thats great. How do you like the micro switch compared with the stock one? I would definitely do the split collar. I feel that most of the strength comes from that.

[@ThePenguin-rn1lo]

That trigger speed was incredible. Definitely making this my next mod. So far I have a lit kick plate of Tron holding up his disc and a 10” tablet of the spinning MCU where the S plate was at.

[@yeksun]

The trigger is definitely worth doing. You can squeeze off so many more shots. I have been considering the S panel mod.

[@pxp751]

Hi. So, what is the size of the split collar your using. Im trying to see if Amazon has that size.

[@Marcade2]

@Yeksun Any follow up on this? How is it holding up? I bought Tron first batch. Been playing carefully. I mean very carefully since then and mine just fractured. Applied your fix and ordered a new L/R replacement set from A1up. Thanks for the vid!

[@yeksun]

Thanks for the comment. Mine is still holding up as of June 2024. Im glad to hear you did the fix. I would do it to your new one as well . Overall I think Tron is pretty easy on the joy stick EXCEPT for the light cycle board. That is the true test of these sticks. Good luck.

[@Marcade2]

@@yeksun yup!! The Light Cycle board got me. I used the clear weld so I may do a stress test on my original controller to see if it will break entirely. You know, just heavy handed play. Nothing too crazy. I’ll post back if it breaks. I doubt it will. I also have a new micro switch coming. I hold #1 on DOT and the hand is tired after a long bout with Sark. An upgrade on the switch should help. I also took an xacto blade to the trigger seam and edges, making it baby smooth. I did notice wear on the trigger to switch contact area. I may need to mod that area to build it back up to keep the throw as short as possible. Thanks for the reply.

[@Marcade2]

Update: your video set me on another level of gameplay. So for that, I have to thank you first and foremost. Props to you, Sir! Arcade1up sent me a complete controller assembly, base and all. Have I used it? NO! Because your tutorial is genius! I not only replaced the trigger switch. I replaced all switches in the base too. It plays like a dream now. So much so, I posted 999,900 on Discs of Tron, securing that top score. No more hand cramps during long plays. All thanks to you! I’ve strong armed the controller several times during play and the existing crack has not budged. This fix is legit. Happy gaming!

[@yeksun]

@@Marcade2 Thats a heck of a score ! Holy smokes. Thanks for the update and the best reply ive ever gotten.

[@supermetalgamerman5930]

Great ideas . So it’s about a year later . How’s it holding up ? I’m going to most likely do this to mine . The trigger for sure at first

[@yeksun]

Thanks. It is still not broken. I think the collar is where most of the strength comes from next is the epoxy that goes on the outside of the stick that supports the collar. Do those two things and you should be good. You will love the new switch

[@davidphillips2326]

Love your low cost solutions. Haven’t put my Tron together yet but definitely think you’re on it. Thanks

[@putopoveda]

What size is the split collar?

[@SPAMsammiches]

THX so much for this! I just sold my modded Big Buck Hunter (20" monitor) to make room for this guy. I have a full size emulator cab, so I really only keep 3 of the Arcade 1Ups anymore, but this one will looks super with Galaga and Star Wars, especially because of the specialized controls that don't allow me to play it on my Arcade Guys cab. Will def be reinforcing the stick like this! THX so much! :)

[@yeksun]

Awesome! Im glad this will help.

[@kgthurber]

Great video, can someone please tell me exactly what micro switch to order and where to order from? Thanks!!

[@yeksun]

paradisearcadeshop.com/products/ultra-light-touch-microswitch www.arcaderenovations.com/zippy-20g-microswitch.html

[@johnworley8272]

Can you please tell me when you switched micro switches out did you have to solder the new one? Please help Thanks

[@yeksun]

No I didnt need to solder. the connectors pull off

[@johnworley8272]

@@yeksun Thank you!

[@johnblack9885]

My Zippy microswitch arrived today and was going to switch it out while the JB Weld is curing in sticks. Do you just pull the terminals off the stock microswitch? I tried to pull and they seem to be on pretty snug and don’t want to break them. Thanks.

[@yeksun]

yes just pull off. You could try using plyers or a flat screwdriver and push the connector off. Let me know what you think of the new switch.

[@johnblack9885]

@@yeksun the new switch is much better! You can definitely fire more shots and is more responsive much like the Bally trigger. Definite must-do mod along with the epoxy and split collar mods. Next will be the GRS Spinner upgrade.

[@yeksun]

@@johnblack9885 Thanks for the update. Im glad you like the trigger mod.

[@matthewhirsch1438]

Do you need to use two types of JB Weld? Could you not use the JB for plastic inside the stick or is the metal that much stronger? (never used it before.)

[@yeksun]

Good question. You certainly could use the plastic bonder inside the handle. It would set so much quicker and I believe is way better than nothing. It does have a little less strength. The plastic bond is 3770 psi verse the metal bond which is 5020 psi. Is that a huge difference that will amount to anything? I cant tell you that. I would say give it a try. Let me know how it goes.

[@DannyWelch]

Very informative. Thanks for sharing!

[@davesutter]

Another great informative video 🔥

[@familycrgaming1907]

What size is the split stick u ordered

[@yeksun]

1 1/8 inch . The link is in the description

[@curtwoot]

Mine hasn’t cracked yet but Do you think only adding the split collar to the flight stick would be a good cautionary idea to keep it from breaking? Thank you Curt

[@curtwoot]

Oh and if so which material would you recommend:)

[@yeksun]

Yes I think it would ad extra support . I would say its worth while. You can select any material , they all will work the same. I see they have a chrome one. That may look good . Get the one with no keyway.

[@jollygreen9377]

Is JB Weld a glue? Do you put the two sides together right away so they’ll stick together?

[@yeksun]

JB weld is a 2 part epoxy. Do not put the 2 sides together right away. Let them dry first. The epoxy will add thickness and strength to the plastic handles.

[@jollygreen9377]

@@yeksun Got it. Thank you.

[@russellcera5203]

What size is the split collar... 1/2 inch? Inch?

[@yeksun]

1-1/18 and its 1/2 thick . heres the link. www.mcmaster.com/split-collars/clamping-two-piece-shaft-collars-9/for-shaft-diameter~1-1-8/

[@johnblack9885]

Which collar finish are you using? Stainless?

[@yeksun]

yes . stainless

[@80s_Gamr]

Is that steel or aluminum for that collar?

[@yeksun]

That one is stainless steel but any material will work.

[@dannygarzon3523]

Good job. Great fix

[@johnchase7667]

The split rings work well. I've not had it break a again.

[@yeksun]

Thanks John. Just curious, did you put the split ring on before or after you saw my video? How long have you had it on there?

[@JIMZUHN]

I also would like to know if just using the split ring is sufficient enough instead of using the epoxy. Thanks.

[@johnchase7667]

@@yeksun Before. I broke mine and it broke where the split ring goes not above that where you added the glue. This is a good idea by the way. A couple of months and it's still good and I play kinda rough with it.

[@johnchase7667]

@@JIMZUHN The split ring is cheap, buy one and put it on and try it. I never thought about adding the glue to make it permanent but that is a much stronger way of doing it. I think the split ring will make all the difference.

[@curtwoot]

@@johnchase7667 John I’d like to Add a split ring to my flight stick too before it breaks as the kids can be rough on it. Love to know what one you recommend with a link! Thanks Curt

[@GantryG]

Smart! 👍

[@dremias]

Isn't it amazing that you pay 700.00 for this and then you must fix the joystick. Mine is the same way plus one panel cut wrong and wrinkles in the marquee. Good solution btw.

[@yeksun]

Yes, Its really a shame. However its almost expected at this point that when you get one of these ,you will need to modify it. Its kind of crazy.

[@libertyraptor]

Amazingly smart solution bro! Where do you get a split collar? What size?

[@libertyraptor]

Ok I see it now! Great vid!

[@yeksun]

@@libertyraptor Ok Thanks.

[@johnblack9885]

Instead on applying epoxy around the collar why not reinforce with an O-ring? That will give it additional tension reinforcement between the collar and the base and be simpler to remove as a non-permanent mod.

[@sls78..]

Did you do the modification to the new stick arcade1up sent you or the broken stick? Just wondering if you kept the new stick in case this didn't work.

[@yeksun]

I did the mod to the new stick. I dont think the broken one would hold up even with all this.