Reading codes, plotting sensor output, plus what this OBDII scanner can't do. You may see the same scanner sold by different names. ToolPRO from supercheap autos, autophix online, ancel, etc.
Пікірлер: 58
@shamirkhan1703 Жыл бұрын
Thanks. This helped me to connect my Toolpro scanner to the car and scan for the problem. Cylinder 2 misfire.😮😅❤
@wayneschenk55124 ай бұрын
Works well on a 07 epica no issues.
@I_AM_ALL_THAT_WAS Жыл бұрын
Hey dude. For future reference at the start of the videos you upload. You could run through quickly exactly what you’re going to talk about or show. Then go into details. Love ya. Cheeers for uploading.
@街拍精華6 ай бұрын
My car can’t connect to the system
@garethbays914517 күн бұрын
would this work on a 2008 toyota crown athlete .
@thomaswilding881817 күн бұрын
@garethbays9145 Apparently Japan was fully obd2 compliant 2008 on.
@garethbays91453 күн бұрын
@@thomaswilding8818 yep works fine and on my 2002 mazda premacy also.
@starocean01 Жыл бұрын
Hi I was wondering if you know how to change the OBD2 system, I kinda just picked one at random when it first asked to select one and I'm not sure how to change or get back to that screen now 😅
@thomaswilding8818 Жыл бұрын
I would try unplugging and start over. It should auto detect. I haven’t had manual selection work when auto doesn’t. But worth a try
@barakbender24495 ай бұрын
I have the same obd scanner, and tried on 04 Toyota corolla. And always says Failed. Any tips
@thomaswilding88185 ай бұрын
If it's a pre obd2 car, then this reader won't work. Sometimes cheaper to pay someone to scan it.
@mattdavis6782 Жыл бұрын
Mines awesome
@android48732 ай бұрын
Don't give up the day job.
@nzmarco Жыл бұрын
Hi. Will this pick up faulty coil packs and vacuum leaks?
@thomaswilding8818 Жыл бұрын
If your car throws a trouble code and stores it on the OBD module then yes. But that’s car specific. Most cars I’ve had don’t know when they have a vacuum leak. You might get a lean mixture or fuel trim code. You then need to diagnose the cause, be it vacuum leak, bad O2 sensor, etc
@MrPropanePete7 ай бұрын
I have one of these and it correctly picked up a faulty coil pack and a faulty knock sensor on a Mazda 2. Don’t know about a vacuum leak but something would probably show up that would lead you to that issue.
@davidmathew6034 ай бұрын
Will this scanner work on a 2005 1.8L nissan sylphy?
@thomaswilding88184 ай бұрын
Don't know. Sylphy would be a Jap import, right? Japan was not fully OBD compliant till 2008 I think. So anything before then is a maybe.
@davidmathew6034 ай бұрын
Thank you. That makes sense of why my scanner is doing what its doing when hooked up. Now I can movè forward onto the next task.
@henrydando3 ай бұрын
Look for a 16 pin OBD port (usually at the bottom of the dash near the pedal. Typically a purple plug) if it has one it will work
@allriennewzealand4101 Жыл бұрын
for CAT O25 orange how fix thats do have tuitirial
@thomaswilding8818 Жыл бұрын
Is that a DTC? I don't know that one.
@MrBrown307 Жыл бұрын
This device is a waste of money, its N/A with any readings on my vehicle. Yes my vehicle a GWM X200 is what I like to call the WISH version of a FORD RANGER or HOLDEN COLORADO. But yes the scanner couldnt read anything N/A anyone else have this problem
@trabador03766 ай бұрын
Hi, will it show odometer reading?
@thomaswilding88186 ай бұрын
Thats car specific. Some cars it only shows what is available on the obd module which wouldn't normally be odo.
@yowiesdownunder2 ай бұрын
Hi mate , will it turn my engine light off for pinkslip?
@thomaswilding88182 ай бұрын
@@yowiesdownunder can ve used to clear obd trouble codes if your car is obd2 compatible. Probably won't clear dtc on other modules.
@yowiesdownunder2 ай бұрын
@@thomaswilding8818 my car is 2013 Holden Cruze it says use obd2 scanner ,what is DTC?
@thomaswilding88182 ай бұрын
@@yowiesdownunder diagnostic trouble code. Is that what you need cleared for pink slip? Is that an emission test?
@yowiesdownunder2 ай бұрын
@@thomaswilding8818 yes cleared for pinkslip ,I took my car to auto electrician said it had codes for misfire cyclnder 5 and coil pack,so a machanic installed new coil pack and sparkplugs engine light still on ,took battery out to try to reset it too,i had a look online same problem with other cruzes if i take it to holden they want. 170$ per hour just to figger the problem out ,so I was going to try the OBD2 scanner
@MC-jf6ic Жыл бұрын
Does it monitor automatic transmission fluid temp?
@thomaswilding8818 Жыл бұрын
Did not give trans temp on my wifes Mazda when I changed the trans oil. Maybe some cars it does but I wouldn’t bank on it. I used an infrared thermometer and took a reading off the pan
@JasonfromBiripiCountry Жыл бұрын
Doesn't seem to work on my 98 Subaru outback
@DA_BEAMERRRR9 ай бұрын
Bc it's an obd1, cars after obd2 are after 1999
@denniswilson53302 жыл бұрын
Can you use this scanner to program new injector codes?.
@thomaswilding88182 жыл бұрын
No. Mostly a reader. Can clear codes, but I haven’t seen any option entering codes or changing vehicle settings
@denniswilson53302 жыл бұрын
@@thomaswilding8818 thanks for this. Yeah I couldn't find anything to allow programming on this scanner
@julianclothier48302 жыл бұрын
Hi Thomas, thanks for your video, I have the exact same machine. How I get it to record and open a file in the software they provide. Driving me crazy, keeps saying no data.
@thomaswilding88182 жыл бұрын
I'm confident whoever wrote the user manual had no idea, because the instructions are no help. I suspect recording does not save data in a way that it can be downloaded. Instead, it is saving readings in flash memory so you can review data before disconnecting. Go to the "review" option to see what is saved (before unplugging)
@julianclothier48302 жыл бұрын
@@thomaswilding8818 thanks will try that.
@gdlivo33532 жыл бұрын
@@thomaswilding8818 No. It is supposed to allow capture of data for uploading to PC via provided USB cable for reading or printing. See Instruction 3.7 Review and Print Diagnostic Reports. However, it is incompatible with Windows 11. Not yet been able to speak to anybody from Autophix for support but SCA have offered to refund the purchase price. Instruction manual Section 5 UPDATE says compatible with Windows 7/8/10 (8 & 10 are plug and play, 7 requires driver. Who is still using Win7 or Win8?). I've emailed Autophix so we'll see how good their support is. Might be a return on this one for me.
@m11ny Жыл бұрын
hey mate, can this reset airbag light?
@thomaswilding8818 Жыл бұрын
Probably not. It should connect to engine control module, but wouldn’t expect it to connect to the abs module.
@m11ny Жыл бұрын
@@thomaswilding8818 ah i knew i shouldve gotten the more expensive version, thanks though ill have to purchase a new one cheers
@thomaswilding8818 Жыл бұрын
@@m11ny some cars, disconnecting the battery for a while can reset codes.
@allriennewzealand4101 Жыл бұрын
please chech air bag dushboard delete use
@thomaswilding8818 Жыл бұрын
This will only access and delete error codes stored on the OBD module. Not those stored in other modules, like airbag warning lights.
@allriennewzealand4101 Жыл бұрын
@@thomaswilding8818 because tuitor upload obm not the air bag
@rubyk9092 Жыл бұрын
just bought from SC only to find out it doesnt work on a VY 2003, sucks the Sales man lied.
@thomaswilding8818 Жыл бұрын
Most forums will tell you everything post 1996, or 2001, but most forums are USA or europe. NZ and AU... and most of planet earth, it was 2006 before OBDII was required. I'd be asking for a refund. I do think the SS commodore went OBDII earlier - Holdens with the LS1. Perhaps because they sold them in the US as a GTO.
@nitrothunder9937 Жыл бұрын
I assume this scanner won’t work on a Holden vz Ute 05. Having issues with it not starting and want to try and see if any faults are showing that may be causing it to not fire up as it sounds like it’s almost there
@thomaswilding8818 Жыл бұрын
@@nitrothunder9937 should work. All LS1 use obd2, right back to vt. And v6 use obd2 on the VZ, so I’m told. Obd2 for connecting to engine module but not body module, abs, etc
@revelacia11 ай бұрын
Say what?
@lachlancameron15917 ай бұрын
Speak up !!
@mrkhokhar4895 Жыл бұрын
Sound very low for this video
@mccheddachaser8037 Жыл бұрын
Which button turns it on ? And gotta charge first ?
@thomaswilding8818 Жыл бұрын
Plug it in to the OBD port - that supplies the power which turns it on.