How To Replace Driver Side CV Axle 2007-2012 Nissan Sentra

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@nop58653]

I like the five lug to 4 lug conversion at 0:20

[@Z33karate]

Oh nice a 7 minute job…. 7 days later . All done ✅

[@josefranciscoesquertalaman3827]

Presente en clases de mecánica automotriz en TRQ, mirando en Navojoa Sonora México, gracias por compartir información que ayuda 🎉

[@RMalai]

thank you for showing. I was told if they are bad the car would shake at high acceleration. is that true? I had the alignment done, but still did not work well. still shaking. this car has those new shocks and now new axles. good to see car being taken care well.

[@inkpirate_tattoo]

Make sure you PB blast all your bolts prior or have an air gun for your axle nut

[@stevebalistreri]

Thanks for the video! Did you have to top off the trans fluid after? Mine has the CVT. Thanks!

[@JonMichaelDeShazer]

How on earth did you pull that CV joint out of the transmission so easily?

[@yoloreverse9124]

I WANTED TO SEE THE INNER PART THAT GOES INTO TRANSMISSION, IS THERE A MEDAL RING, NO AXEL SEAL NEEDED?

[@miguelcalmo2005]

Is there supposed to be a gap between the cv axle and the transmission or does it go right against it ?

[@miguelcalmo2005]

Can you use a different anti seize on the spline or does it have to be copper never seize

[@carlosmad2357]

Would this be the same on a 2016 Nissan Sentra?

[@shukhrattursun]

The Axle Nut needs to be removed before rasing the front of the vehicle or somebody needs to press and hold the brakes, which might not be eficient and safe and might damage the transmission.. grounded and parked vehicle with hand brakes on worked for me..

[@primus699]

What happens if some of all transmission fluid, spills out, do I have to replace transmission fluid

[@pablojunior8333]

Yes, after the job, check the level of Transmission fluid and complet with the amount necessary

[@Sroor90010]

You don’t have to remove link stabilizer like maxima and Altima?

[@skylarford4568]

What if I try to take off the cv axle bolt and the whole cv axles spins with the wrench?

[@lowspeed2000]

Do you need to lube the spline that goes inside the transmission?

[@miguelcalmo2005]

Would this be the same process on a manual 2007 nissan sentra 2.0?

[@MrJ-bz8fe]

Wheres the video for the passenger side?

[@davidm3210]

Old boy works as fast as he talks. Red thread locker? Cheers!

[@TRQ]

+David M Thanks for the feedback! 1aau.to/m/Shop-TRQ

[@NeutronX101]

Why do some have ABS ring? Is that required for cars with ABS?

[@davidm3210]

The ring is required for ABS. If you don't have ABS and it doesn't interfere with installation you can just keep it on.

[@phlyq4130]

Can this be done with hand tools?

[@chriscastonguay2086]

Yes

[@davidm3210]

Yes, but you will need at least a 1/2" breaker bar and quite possibly a "cheater" (a pipe to extend the bar) in order to remove the axle nut. Soak it good with PB Blaster or WD40 first.

[@mustangdanny97]

Yeh right.these Nissans are a joke.it is not that easy pulling the axle out.im still fighting it.i guess I'm gonna have to buy one of those cv puller tools. These videos always make it seem so easy.

[@bobthebuilder9416]

No one shows putting the fluid back in

[@lowspeed2000]

This shouldn't change the alignment though