How to Replace Ignition Coils 2003-2007 Honda Accord 2.4L

Buy Now!
New Ignition Coil from 1AAuto.com 1aau.to/ic/1AECI00198
This video shows you how to install new ignition coils from TRQ on your 2003-2007 Honda Accord (2.4L). Ignition coils help your vehicle's engine run efficiently, cleanly, and smoothly. Rough running, lower than expected mileage, or trouble codes are sure signs that it's time to replace yours.
This process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
Tools you will need:
• 10mm Socket 1aau.to/obi3/1AXAA00017
• Ratchet 1aau.to/obHX/1AXAA00016
• Torque Wrench 1aau.to/oaLW/1AXAA00044
• Gloves 1aau.to/oamH/1AXSS00048
• Safety Glasses 1aau.to/oaez/1AXAA00343
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@hodlcro4dlife661]

What brand coils do you recommend I drive a lot so would you recommend oem Honda Dealership?...

[@hodlcro4dlife661]

Car not holding idle on cold days during winter, already changed the Intake manifold MAP sensor had a check engine light which MAP sensor fixed the Check engine light and no troubles till cold weather comes car stalls out after 1 minute of idle and it's not every day but recently car is having trouble starting takes 3 times to start but fine now runs perfect no codes, has New Battery new ground cables, cleaned throttle body and intake manifold, New PCV Valve, New oil filter and Oil change, New VVT oil control Valve Filter, New Air Filter, New Transmission filter, but once a week decides to stall then fine again till another week or two. No codes😵‍💫